SVA1800 - Pregnant JBL - Free user manual and instructions
Find the device manual for free SVA1800 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Speaker |
| Brand | JBL |
| Model | SVA1800 |
| Speaker Type | 2-way bass reflex |
| Woofer | 8 inch (203 mm) PolyPlas cone |
| Tweeter | 1 inch (25 mm) Titanium dome |
| Frequency Response | 40 Hz – 25 kHz |
| Sensitivity | 90 dB (2.83V @ 1m) |
| Impedance | 8 ohms |
| Recommended Amplifier Power | 20 – 150 watts RMS |
| Crossover Frequency | 2.5 kHz |
| Dimensions (H x W x D) | 18.5 x 8.5 x 9.5 inches (470 x 216 x 241 mm) |
| Weight (each) | 12.5 kg (27.6 lbs) |
| Finish | Black ash vinyl |
| Grille | Acoustically transparent black cloth |
| Connection | 5-way binding posts |
| Recommended Placement | Speaker stands or bookshelf |
| Cleaning | Dust with soft cloth, avoid liquids |
| Safety | Do not expose to moisture, keep away from heat sources |
| Spare Parts | Contact JBL customer service for replacement drivers |
Frequently Asked Questions - SVA1800 JBL
How do I connect the JBL SVA1800 to an amplifier?
Use speaker wire with banana plugs or bare wire. Connect the positive terminal (red) of the speaker to the positive output of your amplifier, and the negative (black) to the negative. Ensure the amplifier is off during connection.
What is the recommended amplifier power for these speakers?
JBL recommends an amplifier with power output between 20 and 150 watts RMS per channel. Using an amplifier within this range ensures optimal performance and avoids damage.
How should I clean the JBL SVA1800 speakers?
Dust the cabinet and grille with a soft, dry cloth. Do not use water, cleaners, or solvents. For the grille, a lint roller can be used. Avoid touching the drivers.
Can I use the JBL SVA1800 as surround speakers?
Yes, the SVA1800 can be used as surround speakers in a home theater system. Place them on stands at ear level or slightly above, angled toward the listening position.
What is the warranty period for JBL SVA1800?
JBL typically offers a 5-year limited warranty for passive speakers. Check your country's specific warranty terms or contact JBL support for details.
Do I need to break in new JBL speakers?
While not strictly necessary, running speakers at moderate volume for 20–50 hours can help loosen the suspension components. This may result in slightly improved bass response.
Can I bi-wire the JBL SVA1800?
The SVA1800 has two pairs of binding posts with metal jumpers. For bi-wiring, remove jumpers and connect separate cables from the amplifier to each pair. This can reduce interference.
What should I do if there is no sound from the speaker?
First, check that the amplifier is on and the source is playing. Verify speaker wire connections are secure and not shorted. Test with another speaker to isolate the issue. If still silent, contact JBL support.
Are the JBL SVA1800 speakers magnetically shielded?
No, the SVA1800 is not magnetically shielded. Do not place them near CRT televisions or magnetic storage media to avoid interference.
Where can I find replacement parts for my JBL SVA1800?
Contact JBL customer support or authorized service centers. Replacement drivers (woofers, tweeters) and crossover components can be ordered. Provide your speaker's serial number for accurate parts.
User questions about SVA1800 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual SVA1800 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SVA1800 by JBL.