THDA-200T - Speaker Taga Harmony - Free user manual and instructions
Find the device manual for free THDA-200T Taga Harmony in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Passive bookshelf speaker |
| Model | THDA-200T |
| Brand | Taga Harmony |
| Driver Configuration | 2-way: 1 tweeter, 1 mid-woofer |
| Tweeter | 1-inch soft dome |
| Woofer | 6.5-inch composite cone |
| Power Handling (RMS) | 80 W |
| Power Handling (Peak) | 120 W |
| Impedance | 8 ohms |
| Sensitivity | 88 dB (1W/1m) |
| Frequency Response | 45 Hz – 20 kHz |
| Crossover Frequency | 2.5 kHz |
| Enclosure Type | Bass reflex with front port |
| Dimensions (W x H x D) | 7.9 x 13.8 x 9.4 inches (200 x 350 x 240 mm) |
| Weight per Speaker | 11.5 lbs (5.2 kg) |
| Connectors | Gold-plated binding posts (bi-wirable) |
| Grille | Removable magnetic cloth grille |
| Cabinet Finish | Black ash or walnut wood veneer |
| Recommended Amplifier Power | 20 – 120 W per channel |
| Placement | Bookshelf or stand-mounted |
| Magnetic Shielding | No (not suitable near CRTs) |
| Warranty | 2 years limited |
Frequently Asked Questions - THDA-200T Taga Harmony
What is the power handling of the Taga Harmony THDA-200T?
The speaker handles 80 W RMS and 120 W peak. It is recommended to use an amplifier with 20–120 W per channel.
What is the impedance of the THDA-200T?
The impedance is 8 ohms, making it compatible with most stereo receivers and amplifiers.
What is the frequency response of this speaker?
The frequency response is 45 Hz – 20 kHz, covering deep bass to clear highs.
Does the THDA-200T come with a grille?
Yes, it includes a removable magnetic cloth grille for protection and a clean look.
Can I bi-wire or bi-amp the THDA-200T?
Yes, the binding posts are gold-plated and bi-wirable, allowing bi-wiring or bi-amping configurations.
What are the dimensions of the THDA-200T?
Each speaker measures 7.9 x 13.8 x 9.4 inches (200 x 350 x 240 mm).
Is the THDA-200T magnetically shielded?
No, it is not magnetically shielded, so avoid placing it near CRT televisions or monitors.
What type of enclosure does the THDA-200T use?
It uses a bass reflex design with a front port for enhanced low-frequency output.
What is the sensitivity of the THDA-200T?
Sensitivity is 88 dB (1W/1m), which is average and works well with most amplifiers.
What finishes are available for the THDA-200T?
The speaker is available in black ash or walnut wood veneer finishes.
User questions about THDA-200T Taga Harmony
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual THDA-200T - Taga Harmony and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. THDA-200T by Taga Harmony.