CSM 2 - Measurement PCE Instruments - Free user manual and instructions
Find the device manual for free CSM 2 PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Coating Thickness Gauge |
| Measurement Principle | Magnetic induction (Fe) / Eddy current (NFe) |
| Measuring Range | 0 – 1250 µm (50 mils) |
| Accuracy | ±(1% + 1 µm) for Fe; ±(1% + 1.5 µm) for NFe |
| Resolution | 0.1 µm (0 – 99.9 µm) / 1 µm (≥100 µm) |
| Substrates | Ferrous (Fe) and non-ferrous (NFe) metals |
| Display | LCD with backlight |
| Power Supply | 2 x 1.5 V AAA batteries |
| Battery Life | Approx. 50 hours of continuous use |
| Auto Power Off | After 5 minutes of inactivity |
| Dimensions | 120 x 62 x 25 mm |
| Weight | 90 g (including batteries) |
| Probe | Integrated, single tip |
| Calibration | Zero and foil calibration |
| Data Storage | Up to 500 readings (grouped) |
| Data Output | USB (optional cable) |
| Operating Temperature | 0 °C to 40 °C |
| Storage Temperature | -20 °C to 60 °C |
| Humidity | ≤ 85% RH non-condensing |
| Standards | DIN EN ISO 2808, ASTM D1186, etc. |
| Maintenance | Clean with a soft, dry cloth; avoid solvents |
| Safety | Use according to instructions; keep away from moisture |
| Spare Parts / Repairability | Calibration foils, probe tips; service by PCE Instruments |
| Included Accessories | Carrying case, batteries, manual, calibration foils |
| Warranty | 2 years (excluding wear parts) |
Frequently Asked Questions - CSM 2 PCE Instruments
What is the CSM 2 used for?
The CSM 2 is a coating thickness gauge used for non-destructive measurement of paint, varnish, plastic, or other non-magnetic coatings on ferrous (steel, iron) and non-ferrous (aluminum, copper) substrates.
How do I calibrate the CSM 2?
Calibration is performed using the supplied calibration foils. Zero calibration on a bare substrate, then foil calibration for the expected thickness range. Follow the manual step-by-step.
What is the measuring range of the CSM 2?
The measuring range is 0 to 1250 µm (0 to 50 mils), with a resolution of 0.1 µm up to 99.9 µm and 1 µm above.
Can I measure coatings on both steel and aluminum?
Yes. The CSM 2 automatically detects the substrate type and applies the correct measurement principle: magnetic induction for ferrous (Fe) and eddy current for non-ferrous (NFe) metals.
How do I change the batteries?
Slide off the battery cover at the back of the device. Insert two 1.5V AAA batteries observing polarity. Replace the cover.
What does the error message "Err1" mean?
Err1 indicates a measurement error, often due to an unstable probe contact or excessive substrate curvature. Reposition the probe and ensure full contact.
Can I transfer data to a computer?
Yes, using the optional USB cable and PCE software. The device can store up to 500 readings in groups, which can be downloaded.
How do I clean the probe?
Clean the probe tip gently with a soft, dry cloth. Do not use abrasive materials or solvents, as they may damage the sensor.
What is the auto power-off time?
The device automatically turns off after 5 minutes of inactivity to save battery life. Press the power button to restart.
Where can I find spare parts or service?
Spare parts like calibration foils and probe tips are available from PCE Instruments. For repairs, contact PCE Instruments or an authorized service center.
User questions about CSM 2 PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual CSM 2 - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CSM 2 by PCE Instruments.