AquaSense Z6920-XL - Faucet Zurn - Free user manual and instructions
Find the device manual for free AquaSense Z6920-XL Zurn in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Touchless Electronic Faucet |
| Brand | Zurn |
| Model | AquaSense Z6920-XL |
| Power Source | 6 AA batteries (included) or optional AC adapter |
| Battery Life | Up to 3 years typical use |
| Sensor Type | Infrared proximity sensor |
| Flow Rate | 0.5 GPM at 60 psi |
| Temperature Control | Single handle for manual temperature mixing |
| Deck Mount | Yes, 1-hole or 3-hole installation |
| Spout Reach | 6.5 inches (165 mm) |
| Spout Height | 5.75 inches (146 mm) |
| Overall Height | 7.5 inches (191 mm) |
| Weight | 2.5 lbs (1.13 kg) |
| Materials | Brass body with chrome finish |
| Water Supply Connection | 3/8 inch compression fitting |
| Operating Pressure | 20–125 psi |
| Operating Temperature | 40–100°F (4–38°C) |
| Sensor Range | Adjustable from 2 to 6 inches |
| Time-out Feature | Automatic shut-off after 60 seconds of continuous flow |
| Certifications | ADA compliant, cUPC, NSF 61-9 |
| Warranty | Limited lifetime warranty |
| Included Accessories | Deck plate (for 3-hole), mounting hardware, batteries, adjustment tool |
Frequently Asked Questions - AquaSense Z6920-XL Zurn
How do I install the AquaSense Z6920-XL faucet?
Installation requires a standard deck opening (1-1/4 inch) or a 3-hole configuration using the included deck plate. Connect the water supply lines, install the batteries or AC adapter, and mount the faucet. Refer to the manual for detailed steps.
How often do I need to replace the batteries?
Under normal usage (approx. 20 cycles per day), the 6 AA batteries last up to 3 years. Low battery indicator (flashing red light) will alert you when replacement is needed.
Can I adjust the sensor range?
Yes, the sensor range is adjustable from 2 to 6 inches using the included adjustment tool. Turn the set screw clockwise to decrease range, counterclockwise to increase.
Why does the faucet not shut off?
Possible causes: sensor range set too high, dirty sensor lens, or reflective objects near the spout. First, clean the lens. Then adjust the sensor range. If issue persists, check battery voltage.
How do I clean the faucet?
Clean with a soft, damp cloth and mild soap. Avoid abrasive cleaners or solvents. Do not spray water directly inside the sensor opening. Dry with a soft cloth after cleaning.
What is the time-out feature?
To prevent continuous flow if an object remains in the sensor field, the faucet automatically shuts off after 60 seconds. To restart, remove the object and wave your hand again.
Can I use an AC adapter instead of batteries?
Yes, an optional AC adapter (model Z6920-AC) can be used. Ensure the adapter is connected to a grounded outlet and follow installation instructions in the manual.
What should I do if the faucet does not turn on?
Check that batteries are installed correctly (positive/negative orientation) or that AC adapter is plugged in. Ensure water supply is turned on. If still not working, inspect the sensor lens for debris.
Is this faucet ADA compliant?
Yes, the AquaSense Z6920-XL meets ADA guidelines for reach, operation, and force required for touchless activation.
Where can I find replacement parts?
Contact Zurn customer service or visit the official website. Parts include sensor assembly, solenoid valve, handle, and battery pack. Refer to the manual for part numbers.
User questions about AquaSense Z6920-XL Zurn
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Faucet in PDF format for free! Find your manual AquaSense Z6920-XL - Zurn and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AquaSense Z6920-XL by Zurn.