CA-HM-HYU.002OEM - Car kit PIONEER - Free user manual and instructions

Product Type	Car Audio Installation Kit
Kit Type	Double DIN
Compatible Vehicle	Hyundai ix35
Compatible Head Units	Pioneer Double DIN Navigation units
Package Contents	1x Facia Plate, 2x Mounting Brackets
Installation Method	Bolt-in with OEM screw locations
Material	ABS Plastic and Metal
Color	Black
Dimensions (Facia Plate)	Approx. 180 x 100 mm
Weight	Approx. 0.3 kg
Professional Installation Required	Yes
Safety Warning	Disconnect battery before installation
Warranty	1 year limited
Repairability	Not user-serviceable; replace parts if damaged
Integration Features	Seamless fit with OEM dashboard
Finish	Matte black
Mounting Hardware Included	Yes (screws)
Special Notes	Compatible only with specific Hyundai ix35 models; verify before purchase

Frequently Asked Questions - CA-HM-HYU.002OEM PIONEER

Is the Pioneer CA-HM-HYU.002OEM compatible with my Hyundai ix35?

Yes, this kit is specifically designed for the Hyundai ix35. However, it is recommended to verify your vehicle's year and trim as minor dashboard variations may exist.

What does the installation kit include?

The kit includes one facia plate and two mounting brackets. Screws are also provided for mounting.

Can I install this kit myself?

Professional installation is strongly recommended. The manufacturer advises that all installation work must be performed by a qualified professional to avoid damage or injury.

Will this kit fit other Pioneer head units?

The kit is designed for Pioneer Double DIN navigation head units. It is not guaranteed to fit other brands or single DIN units.

What tools are needed for installation?

You will need standard automotive tools: screwdrivers (Phillips and flathead), panel removal tools, and possibly a socket set. Disconnect the battery before starting.

How do I remove the factory radio?

First, press down the upper panel to unclip it. Then remove the screws holding the factory radio. Carefully pull the radio out and disconnect the wiring.

Does the facia plate come pre-painted?

The facia plate is matte black and ready to install. It matches the OEM dashboard color of most Hyundai ix35 models.

Is the kit reversible?

Yes, the installation is reversible. Keep all original parts to revert to the factory radio if needed.

What if the mounting brackets don't align?

Ensure you have the correct model year. If alignment issues persist, contact support. Do not force the brackets as this may damage the dashboard.

How do I secure the new head unit?

After connecting all wires, mount the brackets to the Pioneer head unit. Then fix the head unit on the dashboard using the 4 provided screws. Finally, snap the facia plate into place.

USER MANUAL CA-HM-HYU.002OEM PIONEER

Compatible with these Pioneer double DIN devices

Pioneer Navigation

Two black automotive car body brackets with mounting holes, shown from front and side views (no text or symbols)

Double DIN Kit contents

• (1) Facia Plate
• (2) Mounting Brackets

All installation work must be performed by a qualified professional installer only.

The manufacturer / dealer is not liable for any kind of incidental or indirect damages.

Installation Manual Double DIN Kit Hyundai ix35

Interior view of a car dashboard with a hand adjusting the top panel (no visible text or symbols)

1. Press down upper panal in order to unclip it (see arrows)

Close-up of a car interior showing internal components and a labeled device (no readable text or symbols)

1. Remove screws

Interior view of a car dashboard with visible wiring and components (no text or symbols)

1. Remove panel below OEM head unit

Remove screws under OEM head unit (see arrows)

Interior view of a vehicle showing internal components and a highlighted valve (no text or symbols visible)

1. Remove OEM head unit

Close-up of a mechanical component with a central glowing light source and mounting holes (no visible text or symbols)

1. Mount brackets to Pioneer head unit

Connect all wires

Fix Pioneer head unit on dashboard with 4 screws

1. Place facia plate

All installation work must be performed by a qualified professional installer only. The manufacturer / dealer is not liable for any kind of incidental or indirect damages.