Cybex SC940DPHC - Système de commutation Vertiv - Free user manual and instructions
Find the device manual for free Cybex SC940DPHC Vertiv in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Automatic Transfer Switch (ATS) / Power Distribution Unit |
| Model | Cybex SC940DPHC |
| Form Factor | 1U Rackmount |
| Dimensions (HxWxD) | 1.75 x 17.5 x 17.0 inches (44 x 445 x 432 mm) |
| Weight | 12.5 lbs (5.7 kg) |
| Input Voltage | 200–240 VAC, 50/60 Hz |
| Input Current Rating | 20 A |
| Output | 8 C13 and 2 C19 outlets, 20 A total |
| Switching Time | < 10 ms (typical) |
| Remote Monitoring | SNMP, web interface, RS-232 |
| Key Features | Automatic transfer, load shedding, remote power control, event logging |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Humidity | 5% to 95% non-condensing |
| Certifications | UL, cUL, CE, FCC |
| Maintenance | Wipe with dry cloth; no user-serviceable parts inside |
| Spare Parts | Contact Vertiv customer support or authorized dealers |
| Warranty | 2 years limited |
Frequently Asked Questions - Cybex SC940DPHC Vertiv
What is the Vertiv Cybex SC940DPHC?
The Cybex SC940DPHC is an automatic transfer switch (ATS) and power distribution unit designed for data centers and critical infrastructure. It ensures seamless power switching between two input sources.
How do I install the Cybex SC940DPHC in a rack?
Mount the unit in a 1U space using the included rack-mount brackets. Secure with screws and ensure proper grounding. Connect input power sources and load equipment. Refer to the manual for detailed steps.
What are the input voltage requirements?
The unit accepts 200–240 VAC, 50/60 Hz, with a maximum input current of 20 A. It supports dual redundant feeds.
How can I monitor the unit remotely?
Use SNMP, the embedded web interface, or RS-232 serial connection. Configure IP settings via the front panel or initial serial setup.
What does the LCD display show?
The front panel LCD shows input voltage, output load, source selection, and alarm status. Use the buttons to navigate menus.
Can I set up automatic failover?
Yes, the ATS automatically transfers load to the secondary source if the primary fails. You can set thresholds via the web interface or SNMP.
How do I reset the unit to factory defaults?
Press and hold the Reset button on the front panel for 5 seconds, or use the web interface 'Factory Reset' option under Administration.
What is the weight and size?
The unit is 1U high, 19 inches wide, and about 17 inches deep. Weight is approximately 12.5 lbs (5.7 kg).
Is the Cybex SC940DPHC compatible with Vertiv's management software?
Yes, it integrates with Vertiv's Trellis or Power Insight platforms via SNMP for centralized monitoring.
Where can I find spare parts or accessories?
Contact Vertiv customer service or visit vertiv.com to order replacement power cords, rack brackets, or interface modules.
User questions about Cybex SC940DPHC Vertiv
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Système de commutation in PDF format for free! Find your manual Cybex SC940DPHC - Vertiv and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Cybex SC940DPHC by Vertiv.