Ti312d4 - Subwoofer PHOENIX GOLD - Free user manual and instructions
Find the device manual for free Ti312d4 PHOENIX GOLD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Phoenix Gold |
| Model | Ti312d4 |
| Size | 12 inches |
| Voice Coil Configuration | Dual 4 Ohm |
| RMS Power Handling | 600 Watts |
| Peak Power Handling | 1200 Watts |
| Frequency Response | 20 Hz - 200 Hz |
| Sensitivity | 87 dB (1W/1m) |
| Impedance (per coil) | 4 Ohms |
| Mounting Depth | 6.5 inches |
| Mounting Diameter | 11.2 inches |
| Recommended Enclosure Volume (Sealed) | 1.0 - 1.5 cubic feet |
| Recommended Enclosure Volume (Ported) | 1.5 - 2.0 cubic feet |
| Material | Paper cone with rubber surround |
| Magnet Type | Ferrite |
| Wiring Options | Series or parallel (1 or 4 Ohm final) |
| Sealing Gasket | Included |
| Net Weight | 15 lbs |
| Recommended Amplifier Power | 500-800 Watts RMS |
| Cleaning Instructions | Wipe with dry cloth; do not use solvents |
| Safety Note | Secure enclosure to prevent movement in vehicle |
| Warranty | 1 year limited |
| Repairability | Recone kit available |
Frequently Asked Questions - Ti312d4 PHOENIX GOLD
What is the impedance of the Phoenix Gold Ti312d4 subwoofer?
The Ti312d4 has dual 4 ohm voice coils. They can be wired in series for 8 ohms, parallel for 2 ohms, or each coil run independently (4 ohms per channel).
What size enclosure does this subwoofer need?
For a sealed enclosure, 1.0-1.5 cubic feet is recommended. For ported, 1.5-2.0 cubic feet. Always check the manual for exact specifications.
How much power can the Ti312d4 handle?
The RMS power handling is 600 watts, with a peak of 1200 watts. It is best paired with an amplifier delivering 500-800 watts RMS.
What is the mounting depth of this subwoofer?
The mounting depth is approximately 6.5 inches. Ensure your enclosure has enough clearance.
Can I use this subwoofer in a car or home audio system?
It is designed for car audio, but can be used in home theater with a suitable amplifier and enclosure.
Does the Ti312d4 require a break-in period?
Yes, it is recommended to play the subwoofer at moderate levels for 10-20 hours to loosen the suspension.Do not exceed 50% power during break-in.
How do I wire the dual voice coils?
To achieve a final impedance of 1 ohm, wire both coils in parallel (positive to positive, negative to negative, then to amp). For 4 ohms, wire in series (positive of one coil to negative of the other, then remaining terminals to amp).
What type of cone material does it use?
The Ti312d4 features a paper cone with a rubber surround, providing a good balance of stiffness and damping.
Is the Ti312d4 suitable for a ported enclosure?
Yes, it works well in ported enclosures. Optimal ported volume is 1.5-2.0 cubic feet with a tuning frequency around 35 Hz.
How do I clean and maintain this subwoofer?
Wipe the cone and surround with a soft dry cloth. Avoid liquids and solvents. Check mounting screws periodically for tightness.
User questions about Ti312d4 PHOENIX GOLD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Ti312d4 - PHOENIX GOLD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ti312d4 by PHOENIX GOLD.