22-14599 - Dishwasher KENMORE - Free user manual and instructions
Find the device manual for free 22-14599 KENMORE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Kenmore |
| Model | 22-14599 |
| Dimensions (W x D x H) | 24 x 24 x 34.5 inches |
| Weight | Approximately 100 lbs (45 kg) |
| Power Requirements | 120V, 60Hz, 15A |
| Place Settings | 12-14 place settings |
| Noise Level | 48-52 dBA |
| Cycles | Normal, Heavy, Light, Rinse Only |
| Options | Delay Start, Sanitize, Heated Dry, High Temp Wash |
| Control Type | Electronic push button with LED indicators |
| Installation Type | Under-counter, hardwired or plug-in |
| Color Options | White, Black, Stainless Steel |
| Energy Star Certified | Yes |
| Soil Sensor | Yes |
| Hard Food Disposer | Yes |
| Tub Material | Stainless steel or plastic (check model) |
| Rack Configuration | Upper and lower racks with fold-down tines |
| Silverware Basket | Removable third-level or covered basket |
| Water Consumption | Approximately 4-6 gallons per cycle |
| Safety Features | Child lock, flood protection, auto shut-off |
| Maintenance | Clean filter monthly, check spray arms for clogs |
| Repairability | User-accessible parts: filters, racks, spray arms; main control board requires technician |
| Spare Parts Availability | Available through Kenmore or authorized retailers |
Frequently Asked Questions - 22-14599 KENMORE
How do I start a cycle on my Kenmore 22-14599 dishwasher?
Load the dishwasher, add detergent, select a cycle using the cycle selector button, then press Start. Ensure the door is closed securely.
What detergents are recommended for this model?
Use a quality dishwasher detergent (powder, gel, or pods). For hard water, add a rinse aid to improve drying and reduce spots.
Why is my dishwasher not draining?
Check the drain filter for clogs, ensure the drain hose is not kinked, and clean the air gap if applicable. Also verify the garbage disposal (if connected) is not blocked.
How do I clean the filter?
Remove the bottom rack and twist the filter assembly counterclockwise to remove. Rinse under running water, scrub with a soft brush if needed, and reinstall.
What does the 'Sanitize' option do?
The Sanitize option raises the final rinse temperature to approximately 155°F (68°C) to kill bacteria, meeting NSF requirements for sanitization.
How can I reduce noise from my dishwasher?
Ensure the dishwasher is level and not touching cabinets. Use sound-dampening insulation wraps. Check for loose items inside or spray arms hitting dishes.
Why are dishes still wet after a cycle?
Enable Heated Dry option, use rinse aid, and ensure dishes are not over-packed. Also check the heating element if not drying.
How do I set the delay start?
Press the Delay Start button repeatedly to set the number of hours (usually 1-12). Close the door, and the cycle will start after the delay.
What do the error codes mean?
Common codes: E1 (water leak), E2 (drain issue), E3 (heater failure). Refer to the user manual for full list. Reset by turning off power for 30 seconds.
Can I use a dishwasher pod in this model?
Yes, but place the pod in the main detergent compartment, not the pre-wash. Do not overfill the dispenser, and use pods as directed to avoid residue.
User questions about 22-14599 KENMORE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual 22-14599 - KENMORE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 22-14599 by KENMORE.