American Original '60s Precision Bass - Guitar FENDER - Free user manual and instructions
Find the device manual for free American Original '60s Precision Bass FENDER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bass Guitar |
| Model | American Original '60s Precision Bass |
| Brand | Fender |
| Scale Length | 34 inches |
| Neck Material | Maple |
| Fingerboard Material | Rosewood |
| Body Material | Alder |
| Body Finish | Gloss Nitrocellulose Lacquer |
| Pickups | Split Single-Coil Precision Bass Pickup |
| Controls | Master Volume, Master Tone |
| Bridge | 4-Saddle Vintage Style |
| Tuning Machines | Vintage Style Reverse |
| Number of Frets | 20 |
| Nut Width | 1.625 inches |
| Weight | Approximately 9 lbs |
| Power Requirement | Passive (no battery) |
| Maintenance | Regular cleaning, string replacement, truss rod adjustment |
| Safety Precautions | Avoid extreme temperatures and humidity; use a padded case |
| Spare Parts Availability | Available from Fender authorized dealers |
| Reparability | Serviceable by qualified guitar technician |
| General Information | Vintage-style instrument with authentic '60s specifications |
Frequently Asked Questions - American Original '60s Precision Bass FENDER
How do I change the strings on my Fender American Original '60s Precision Bass?
To change strings, loosen the tuning machines, cut the old strings, then thread new strings through the bridge and tuning pegs. Tune to pitch and stretch the strings. Refer to the manual for string winding details.
What type of strings should I use for this bass?
Fender recommends roundwound strings, gauges .045-.105. You can also use flatwounds for a more vintage feel. Ensure the string ball ends fit the vintage bridge.
How do I adjust the truss rod?
The truss rod is located at the headstock. Use a 3/16 inch hex wrench. Turn clockwise to reduce relief, counterclockwise to increase. Make small adjustments and check neck relief with a capo and feeler gauge.
How do I clean and maintain the bass?
Wipe down the body and neck with a soft, dry cloth after playing. Use guitar polish for lacquer finishes sparingly. Keep the frets clean with a soft cloth and avoid moisture.
What is the scale length and how does it affect playability?
The scale length is 34 inches (long scale). This provides tight string tension and clear low-end response. It is standard for Precision Bass models.
Can I replace the pickups with aftermarket ones?
Yes, the split single-coil pickup can be replaced with any standard Precision Bass pickup. Ensure proper soldering and shielding for best results. Consult a technician if unsure.
How do I set the intonation?
Use a screwdriver to adjust the bridge saddles forward or backward. Tune each string to pitch, then check the 12th fret harmonic and fretted note. Adjust until they match. Repeat for all 4 strings.
What is the best way to store the bass?
Store in a hard case in a stable environment (temperature 60-75°F, humidity 40-50%). Avoid direct sunlight and extreme changes to prevent wood damage.
How often should I replace the strings?
Replace strings every 3-4 months for regular playing, or more frequently if they sound dull or feel rough. New strings maintain tone and intonation.
What should I do if the output jack is loose or crackles?
Check the jack nut on the output jack. Tighten it with a wrench. If crackling persists, the soldering may be poor; resolder the connections or replace the jack. Seek repair help if needed.
User questions about American Original '60s Precision Bass FENDER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Guitar in PDF format for free! Find your manual American Original '60s Precision Bass - FENDER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. American Original '60s Precision Bass by FENDER.