O4LT2 - Security Camera Speco Technologies - Free user manual and instructions
Find the device manual for free O4LT2 Speco Technologies in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera (Bullet) |
| Brand | Speco Technologies |
| Model | O4LT2 |
| Resolution | 4 Megapixels (2560 x 1440) |
| Lens | Fixed 2.8mm, F1.8 |
| Night Vision | Up to 100ft (30m) with IR LEDs |
| Weatherproof Rating | IP67 |
| Power Supply | 12V DC, PoE (IEEE 802.3af) |
| Dimensions (W x H x D) | 2.8 in x 7.5 in x 2.8 in (71 mm x 190 mm x 71 mm) |
| Weight | 1.2 lbs (0.54 kg) |
| Video Compression | H.265, H.264 |
| Field of View | Horizontal: 100°, Vertical: 54° |
| Motion Detection | Yes, with customizable zones |
| Audio | Built-in microphone |
| Storage | MicroSD card (up to 128GB), NVR |
| Network Interface | 10/100 Base-T Ethernet |
| Protocols | IPv4, HTTP, FTP, SMTP, DHCP, DDNS |
| Operating Temperature | -22°F to 140°F (-30°C to 60°C) |
| Mounting | Wall or ceiling mount (bracket included) |
| Maintenance | Clean lens with soft cloth; keep vents unobstructed |
| Safety | Surge protection; tamper-resistant design |
| Spare Parts & Repairability | Contact Speco support for authorized parts |
| General Information | Free user manual available at notice-facile.com |
Frequently Asked Questions - O4LT2 Speco Technologies
How do I connect the O4LT2 camera to my network?
Connect the camera to your PoE switch or injector using an Ethernet cable. If using 12V DC, connect the power adapter. The camera will obtain an IP address via DHCP. Use the Speco IP Finder software to locate it on your network.
Can I use the O4LT2 camera without an NVR?
Yes, you can insert a MicroSD card (up to 128GB) for local recording. Alternatively, you can set up FTP or SMTP recording directly from the camera.
What is the maximum resolution of the O4LT2?
The camera supports up to 4 Megapixels (2560 x 1440) at 30 frames per second. Lower resolutions are also available.
How do I reset the O4LT2 to factory settings?
Press and hold the reset button (located near the Ethernet port) for about 10 seconds using a paperclip while the camera is powered on. The camera will reboot to factory defaults.
Does the O4LT2 camera support audio?
Yes, it has a built-in microphone for audio recording. Audio output is available via the Ethernet cable (PoE) or through an external speaker if supported by your recorder.
What is the night vision range of the O4LT2?
The infrared LEDs provide night vision up to 100 feet (30 meters) in complete darkness. The camera automatically switches to IR mode when light levels drop.
Can I mount the O4LT2 outdoors?
Yes, it is rated IP67 weatherproof, meaning it is dust-tight and can withstand heavy rain. Operating temperature range is -22°F to 140°F (-30°C to 60°C).
How do I view the camera remotely?
Use the Speco Viewtron app or a web browser. Ensure the camera is connected to the internet and set up port forwarding or use P2P (peer-to-peer) via the camera's UID.
What is the field of view of the O4LT2?
With the fixed 2.8mm lens, the camera offers a horizontal field of view of 100 degrees and a vertical field of view of 54 degrees.
Is the O4LT2 compatible with third-party NVRs?
The camera supports standard ONVIF protocols (Profile S), so it should work with most third-party NVRs that support ONVIF. However, advanced features may require a Speco recorder.
User questions about O4LT2 Speco Technologies
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual O4LT2 - Speco Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. O4LT2 by Speco Technologies.