WorkCentre 5022 - Printer XEROX - Free user manual and instructions
Find the device manual for free WorkCentre 5022 XEROX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multifunction Monochrome Laser Printer |
| Functions | Print, Copy, Scan, Fax |
| Print Speed | Up to 22 pages per minute (A4) |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | Up to 22 copies per minute (A4) |
| Scan Resolution | Up to 600 x 600 dpi (optical) |
| Paper Input Capacity | 500-sheet standard tray + 50-sheet bypass tray |
| Paper Output Capacity | 250 sheets face-down |
| Media Sizes Supported | A4, A5, A6, B5, Letter, Legal, Executive, Envelopes |
| Dimensions (W x D x H) | 640 x 649 x 1000 mm (25.2 x 25.6 x 39.4 in) |
| Weight | Approximately 80 kg (176 lb) |
| Power Requirements | 220-240 VAC, 50/60 Hz |
| Power Consumption | Max 1.3 kW (printing), 60 W (standby), 5 W (sleep) |
| Connectivity | USB 2.0, Ethernet 10/100 Base-TX |
| Network Protocols | TCP/IP, SNMP, HTTP, FTP, SMTP, LPR/LPD |
| Consumables | Toner cartridge (standard/high capacity), drum unit |
| Maintenance | Regular cleaning of paper path, replace toner when low, periodic drum replacement |
| Safety | Operate on a stable surface, avoid water, unplug before cleaning, use grounded outlet |
| Spare Parts & Repairability | Replaceable fuser, transfer roller, feed rollers; service parts available through Xerox |
| General Info | Designed for small to medium workgroups; supports PCL6, PostScript 3 |
Frequently Asked Questions - WorkCentre 5022 XEROX
How do I load paper into the tray?
Pull out the paper tray, adjust the guides to the paper size, fan the paper stack, then insert it face up for one-sided printing. Ensure the guides are snug but not tight.
What should I do if a paper jam occurs?
Open the front cover and the rear door. Carefully remove any jammed paper by pulling in the direction of the paper path. Check all rollers and close the covers firmly.
How do I replace the toner cartridge?
Open the front cover, remove the old toner cartridge, unpack the new one, shake it gently side to side, then insert until it clicks into place. Close the cover and run a print test.
Can I connect the printer to a network?
Yes, connect an Ethernet cable from the printer to your router or switch. Configure the IP address via the control panel or DHCP. The printer supports TCP/IP networking.
How do I perform a factory reset?
Press the Machine Status button, go to Tools > Maintenance > Reset and select Reset to Factory Defaults. Confirm the action.
What types of paper are supported?
The printer supports plain paper, recycled paper, envelopes, labels, and transparencies in sizes from A5 to Legal. Avoid using rough or coated paper.
How do I clean the printer?
Unplug the printer. Use a dry lint-free cloth to wipe the exterior. For the interior, use a brush or vacuum to remove dust and toner residue. Do not use liquid cleaners.
What does the error code E7-400 mean?
E7-400 indicates a fuser unit error. Turn off the printer, wait 10 minutes, then restart. If the error persists, the fuser may need replacement. Contact Xerox support.
How do I scan a document to email?
Place the document on the scan glass or ADF. Press Scan To, select Email, enter the recipient address via the touchscreen, then press Start. Configure SMTP settings beforehand.
Where can I find spare parts?
Authorized Xerox service providers and online retailers offer spare parts such as toner cartridges, drum units, and fuser assemblies. Use only genuine Xerox parts for warranty compliance.
User questions about WorkCentre 5022 XEROX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual WorkCentre 5022 - XEROX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WorkCentre 5022 by XEROX.