Multiducer SSP6 - Speaker Revolution Acoustics - Free user manual and instructions
Find the device manual for free Multiducer SSP6 Revolution Acoustics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surface Mount Speaker |
| Model | Multiducer SSP6 |
| Brand | Revolution Acoustics |
| Driver Configuration | 6.5-inch Polypropylene Woofer, 1-inch Silk Dome Tweeter |
| Impedance | 8 Ohms |
| Power Handling (RMS) | 60 Watts |
| Power Handling (Peak) | 120 Watts |
| Frequency Response | 60 Hz - 20 kHz |
| Sensitivity | 88 dB (1W/1m) |
| Dimensions (W x H x D) | 8.5 x 8.5 x 4.0 inches |
| Weight | 2.5 lbs (1.13 kg) |
| Mounting Type | Surface Mount with Included Bracket |
| Color | White (Paintable Grille) |
| Enclosure Material | ABS Plastic with Metal Grille |
| Input Type | Spring-Loaded Terminals (Accepts up to 14 AWG) |
| Recommended Amplifier Power | 20 - 100 Watts RMS per Channel |
| Warranty | 5 Years Limited |
| Indoor/Outdoor Rating | Indoor Use Only |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use solvents or water. |
| Safety Warnings | Secure mounting to prevent falling. Do not expose to moisture. |
| Spare Parts Availability | Contact Revolution Acoustics support for replacement parts. |
Frequently Asked Questions - Multiducer SSP6 Revolution Acoustics
How do I install the Multiducer SSP6 speaker?
Mount the bracket to a wall using the included screws. Connect speaker wires to the spring-loaded terminals, ensuring correct polarity. Attach the speaker to the bracket and tighten the locking screws.
What is the recommended amplifier power for this speaker?
The recommended amplifier power is 20 to 100 Watts RMS per channel. Using an amplifier within this range ensures optimal performance and prevents damage.
Can I paint the speaker grille?
Yes, the grille is paintable. Remove the grille, spray with thin coats of paint, and let dry completely before reattaching. Do not paint the driver or enclosure.
What type of wire should I use?
Use 16 to 14 AWG speaker wire. Strip about 3/8 inch of insulation and insert into the spring-loaded terminals.
How do I clean the speaker?
Wipe the enclosure and grille with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners, as they may damage the finish.
Why is there no sound coming from the speaker?
Check that the amplifier is powered and the source is playing. Ensure speaker wires are securely connected and not touching each other. Verify the amplifier's volume is turned up and not muted.
Is this speaker suitable for outdoor use?
No, the Multiducer SSP6 is designed for indoor use only. Exposure to moisture or extreme temperatures can damage the speaker.
What is the impedance of the speaker?
The speaker has an impedance of 8 Ohms. It can be used with most home stereo receivers and amplifiers designed for 8-ohm loads.
Can I use multiple SSP6 speakers together?
Yes, you can connect multiple speakers in parallel or series, but ensure the total impedance stays within your amplifier's rating. For parallel connections, use an impedance calculator.
What is the warranty period?
The Revolution Acoustics Multiducer SSP6 comes with a 5-year limited warranty against defects in materials and workmanship. Retain your proof of purchase.
User questions about Multiducer SSP6 Revolution Acoustics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Multiducer SSP6 - Revolution Acoustics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Multiducer SSP6 by Revolution Acoustics.