5924 - Food thermometer Taylor - Free user manual and instructions

Product Type	Digital Food Thermometer
Model	Taylor 5924
Temperature Range	-40°F to 450°F (-40°C to 232°C)
Accuracy	±1°F (±0.5°C) from 32°F to 212°F
Probe Length	Approximately 5 inches (127 mm)
Display Type	LCD, 0.5 inch digits
Power Source	1 x LR44 (button cell) battery (included)
Auto-Off	After approximately 10 minutes of inactivity
Response Time	3 to 5 seconds
Minimum/Maximum Memory	Yes
Water Resistance	Not waterproof; wipe clean only
Dimensions (approx.)	1.5 x 0.75 x 8 inches (38 x 19 x 203 mm)
Weight (with battery)	Approximately 2.5 ounces (71 g)
Material	Stainless steel probe, plastic body
Certifications	NSF certified
Cleaning Instructions	Wipe probe with a damp cloth; do not immerse
Battery Life	Approximately 300 hours of continuous use
Temperature Units	Switchable °F/°C
Foldable Probe	Yes
Tip Diameter	0.1 inches (2.5 mm)

Frequently Asked Questions - 5924 Taylor

How do I switch between Fahrenheit and Celsius?

Press and hold the ON/OFF button for 2 seconds until the display shows the current unit. Then press the TEMP button to toggle between °F and °C. The unit will save your preference.

Is the Taylor 5924 waterproof?

No, the Taylor 5924 is not waterproof. Do not immerse the thermometer in water. Clean the probe with a damp cloth and dry immediately. The battery compartment and electronics must stay dry.

How do I replace the battery?

Slide the battery compartment cover (located on the back of the handle) off. Remove the old LR44 battery and insert a new one with the positive (+) side facing up. Slide the cover back on until it clicks.

What is the temperature range of this thermometer?

The Taylor 5924 measures temperatures from -40°F to 450°F (-40°C to 232°C). It is suitable for grilling, baking, candy making, and checking meat doneness.

How accurate is the thermometer?

The accuracy is ±1°F (±0.5°C) in the range of 32°F to 212°F (0°C to 100°C). Outside this range, accuracy may slightly decrease.

Can I leave the thermometer in the oven?

Yes, the probe can withstand oven temperatures up to 450°F (232°C). However, do not expose the plastic handle or LCD display to direct heat or leave the thermometer in the oven during self-cleaning cycles.

How do I calibrate the Taylor 5924?

This thermometer is factory calibrated and does not require user calibration. If you suspect inaccuracy, test it by inserting the probe into a mixture of ice water (32°F/0°C) or boiling water (212°F/100°C at sea level). If readings are off by more than 2°F, contact Taylor customer service.

Why does the thermometer turn off quickly?

The auto-off feature shuts the thermometer off after 10 minutes of inactivity to save battery. To disable auto-off for continuous monitoring, press the ON/OFF button for 3 seconds until the auto-off icon disappears.

How do I clean the probe?

Wipe the stainless steel probe with a damp cloth or sponge after each use. For stubborn residue, use mild soap and water. Avoid abrasive cleaners and never submerge the entire thermometer. Dry thoroughly before storing.

What is the response time?

The thermometer provides a reading in 3 to 5 seconds for most foods. Thick or frozen foods may take slightly longer (up to 10 seconds). For best results, insert the probe at least 1/2 inch into the food.

USER MANUAL 5924 Taylor

OPTIMAL TEMPERATURES

Hang or stand thermometer in the fridge or freezer to help monitor food safe temperature zones. Keeping your appliances at the proper settings will help with energy usage and food spoilage.

CLEANING AND CARE:

Handwash only. Do not immerse in water or put in dishwasher.

LIFETIME WARRANTY

MODEL 5924

©2017 Taylor Precision Products

Seattle, WA 98134

For warranty information please call 1.866.843.3905

or visit us online at: SHOPTAYLORUSA.COM

5924_01.30.17

Made in China

Place Sticker Here