5937N - Food thermometer Taylor - Free user manual and instructions
Find the device manual for free 5937N Taylor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Taylor |
| Model | 5937N |
| Product Type | Food Thermometer |
| Measurement Range | -40°F to 450°F (-40°C to 230°C) |
| Accuracy | ±1°F (±0.5°C) from 32°F to 212°F |
| Response Time | 4-6 seconds |
| Probe Material | Stainless Steel |
| Display Type | LCD |
| Power Source | 1 LR44 battery (included) |
| Auto-Off | After 10 minutes of inactivity |
| Dimensions | 5.5 x 1.0 x 0.75 inches |
| Weight | 1.6 oz (45 g) |
| Functions | Temperature reading, hold function, min/max memory |
| Cleaning | Wipe with damp cloth; do not submerge in water |
| Safety | Not oven-safe; wash probe after each use |
| Spare Parts | LR44 battery (readily available) |
| Warranty | 1 year limited |
Frequently Asked Questions - 5937N Taylor
How do I use the Taylor 5937N food thermometer?
Insert the probe at least 1/2 inch into the thickest part of the food. Wait 4-6 seconds for a stable reading. The display will show the temperature in °F or °C. Use the hold button to freeze the reading if needed.
How do I change the battery?
Slide off the battery compartment cover on the back. Remove the old LR44 battery and insert a new one with the positive (+) side facing up. Replace the cover.
Is the thermometer waterproof?
No, the Taylor 5937N is not waterproof. Do not immerse it in water. Clean the probe with a damp cloth and dry immediately. Store in a dry place.
How accurate is this thermometer?
It has an accuracy of ±1°F (±0.5°C) in the range of 32°F to 212°F. Outside that range, accuracy may vary slightly.
Can I calibrate the thermometer?
The Taylor 5937N is factory calibrated and does not have user calibration. If you suspect it is inaccurate, contact Taylor customer support.
What is the temperature range?
The thermometer measures from -40°F to 450°F (-40°C to 230°C). It is suitable for both cold and hot foods.
How long does it take to get a reading?
The response time is typically 4-6 seconds. For thicker foods, allow a few more seconds for the probe to stabilize.
How do I switch between Fahrenheit and Celsius?
Press and hold the '°F/°C' button (if available) or refer to the manual. Some models require removing the battery and reinserting while holding a button; however, the 5937N typically defaults to °F.
What should I do if the display shows 'Err' or 'HHH'?
'Err' indicates the probe is disconnected or damaged. 'HHH' means the temperature is above the measurement range. Check the probe connection and ensure the food temperature is within range.
How should I store the thermometer?
Store in a dry place at room temperature. Keep the probe sheathed or protected to avoid bending. Remove the battery if storing for extended periods.
User questions about 5937N Taylor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Food thermometer in PDF format for free! Find your manual 5937N - Taylor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5937N by Taylor.
USER MANUAL 5937N Taylor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Taylor
Model : 5937N
Category : Food thermometer