SuperServer SYS-510D-10C-FN6P - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer SYS-510D-10C-FN6P Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Form Factor | 1U |
| Processor | Intel Xeon D-1700 Series |
| Number of Cores | 10 |
| Memory Support | DDR4 ECC, up to 512 GB |
| Storage | 4x 3.5" or 2.5" SATA/SAS hot-swap bays |
| Network | 2x 10GbE SFP+ and 4x 1GbE RJ45 |
| Power Supply | Redundant 750W AC (80+ Platinum) |
| Dimensions (W x D x H) | 43.2 x 43.7 x 4.3 cm |
| Weight | 16 kg |
| Cooling | 4x hot-swap fans with redundancy |
| Management | IPMI 2.0 with dedicated LAN |
| Operating Temperature | 0°C to 40°C |
| Certifications | CE, FCC |
| Maintenance | Regular dust cleaning; replace fans and power supplies as needed |
| Safety | Disconnect power before servicing; use ESD strap |
| Spare Parts | Power supply modules, fan modules, hard drive carriers, riser brackets |
| Repairability | Modular design with tool-less access to hot-swap components |
| General Information | Designed for enterprise workloads including virtualization and storage |
Frequently Asked Questions - SuperServer SYS-510D-10C-FN6P Supermicro
How do I install an operating system on the SuperServer SYS-510D-10C-FN6P?
Boot from a USB drive or virtual media via IPMI. During POST, press F11 to select the boot device. Ensure the OS is compatible with the Xeon D-1700 platform.
How can I reset the IPMI password if forgotten?
Locate the CMOS clear jumper on the motherboard (JP4). Power off the server, move the jumper from pins 1-2 to 2-3 for 10 seconds, then return to 1-2. This resets IPMI settings to defaults including the admin password.
What is the maximum memory capacity?
The server supports up to 512 GB of DDR4 ECC memory across 4 DIMM slots, using 128 GB RDIMM modules.
How do I replace a failed hard drive?
The drive bays are hot-swap. Press the release button to unlock the carrier, pull out the failed drive, insert a new drive of the same type, and close the handle. The RAID controller will automatically rebuild if configured.
How to update the BIOS?
Download the latest BIOS from Supermicro's website. Use the Supermicro Update Manager (SUM) utility or IPMI's firmware update feature. Always backup current settings before updating.
What RAID levels are supported?
With the optional Broadcom RAID controller, supported levels include RAID 0, 1, 5, and 10. Software RAID via the chipset also supports basic RAID 0/1.
How to connect to the BMC for remote management?
The default IP address of the BMC is 192.168.0.120. Connect to the dedicated management LAN port, open a browser, and log in with username 'admin' and password 'admin'. Change the password after first login.
What is the proper power on sequence?
Connect the power cables to the redundant power supplies. Press the power button on the front panel. The system will POST and boot to the default boot device. Monitor via VGA or IPMI.
Where can I download drivers and software?
Visit Supermicro's support page at https://www.supermicro.com/support/ and enter the model SYS-510D-10C-FN6P. Drivers include chipset, network, RAID, and management tools.
What is the warranty period?
Supermicro provides a 3-year limited warranty covering parts and labor. Extended support is available through authorized resellers.
User questions about SuperServer SYS-510D-10C-FN6P Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer SYS-510D-10C-FN6P - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer SYS-510D-10C-FN6P by Supermicro.