SP-9421-22060 - Compressor California Air Tools - Free user manual and instructions
Find the device manual for free SP-9421-22060 California Air Tools in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Compressor |
| Model | SP-9421-22060 |
| Brand | California Air Tools |
| Motor Power | 2.0 HP |
| Tank Capacity | 21 Gallons (80 Liters) |
| Voltage | 120 V / 60 Hz |
| Max Pressure | 125 PSI |
| Air Flow (SCFM @ 90 PSI) | 4.0 SCFM |
| Noise Level | 60 dB |
| Pump Type | Oil-Free |
| Weight | 72 lbs (33 kg) |
| Dimensions (L x W x H) | 24 x 18 x 40 inches |
| Drain Valve | Ball Valve at Tank Bottom |
| Pressure Gauge | Dual Gauges (Tank and Regulator) |
| Thermal Overload Protection | Yes, Automatic Reset |
| Regulator | Adjustable with Lock Knob |
| Wheel Kit | Included (2 Wheels) |
| Maintenance | Drain Tank Daily; Check Safety Valve |
| Safety Features | Safety Relief Valve, Auto Shut-Off |
| Spare Parts Availability | Filters, Regulators, Valves Available Online |
Frequently Asked Questions - SP-9421-22060 California Air Tools
What is the recommended oil type for this compressor?
This compressor has an oil-free pump, so no oil is required for the pump. However, if applicable, check the motor bearings (sealed).
How do I drain the tank?
Locate the ball valve at the bottom of the tank. Turn it counterclockwise to open and drain moisture. Close after draining.
What is the maximum pressure setting?
The factory set cut-out pressure is 125 PSI. Adjust the pressure switch if needed, but do not exceed the rated maximum.
Why does the compressor shut off and not restart?
This could be due to thermal overload protection. Allow the motor to cool for 30 minutes. Also check the pressure switch and power supply.
Can I use an extension cord?
It is not recommended. If necessary, use a 12-gauge cord no longer than 25 feet to prevent voltage drop.
How often should I change the air filter?
Check the filter monthly; replace it every 3 months or sooner if dirty. A clogged filter reduces performance.
What is the noise level of this compressor?
This model operates at approximately 60 dB, which is very quiet compared to conventional compressors.
Is the tank certified?
Yes, the tank is ASME certified for safety. Do not modify or weld the tank.
How do I adjust the regulator?
Pull the regulator knob out, turn to desired pressure (visible on gauge), then push knob back in to lock.
Where can I find spare parts?
Spare parts like filters, regulators, and valves are available on the California Air Tools website or authorized dealers. Use model SP-9421-22060.
User questions about SP-9421-22060 California Air Tools
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual SP-9421-22060 - California Air Tools and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SP-9421-22060 by California Air Tools.