PRO 210 - Fire extinguisher KIDDE - Free user manual and instructions
Find the device manual for free PRO 210 KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fire Extinguisher |
| Brand | Kidde |
| Model | PRO 210 |
| Fire Class Rating | 2-A:10-B:C |
| Extinguishing Agent | Monoammonium Phosphate (Dry Chemical) |
| Capacity | 5 lb (2.27 kg) |
| Weight | 7.5 lb (3.4 kg) |
| Height | 15 inches (38.1 cm) |
| Diameter | 4.5 inches (11.4 cm) |
| Discharge Time | Approximately 13-15 seconds |
| Operating Pressure | 195 psi (13.4 bar) |
| Temperature Range | 40°F to 120°F (4°C to 49°C) |
| Mounting Bracket | Included wall bracket |
| Gauge Type | Easy-to-read pressure gauge |
| Handle Material | Metal with corrosion-resistant finish |
| Warranty | 6 years limited warranty |
| Certifications | UL Listed, ANSI/UL 711, ANSI/UL 299 |
| Maintenance | Monthly visual inspection; annual professional recharge if discharged |
| Rechargeable | Yes, by certified professional only |
| Clean Up After Use | Vacuum dry chemical residue; avoid inhalation |
| Disposal | Follow local regulations; may be recycled as scrap metal |
Frequently Asked Questions - PRO 210 KIDDE
What types of fires can the Kidde PRO 210 extinguish?
The Kidde PRO 210 is rated for Class A (ordinary combustibles like wood, paper, cloth), Class B (flammable liquids like gasoline, oil), and Class C (energized electrical equipment). It is not suitable for Class D (combustible metals) or Class K (cooking oils/grease).
How do I check if the extinguisher is charged?
Look at the pressure gauge on the neck. If the needle is in the green zone, it is properly charged. If in the red zone (overcharged or undercharged), have it serviced immediately.
What is the correct way to use the extinguisher?
Remember the PASS technique: Pull the pin, Aim low at the base of the fire, Squeeze the handle, Sweep from side to side. Stand 6-8 feet away and aim at the base, not the flames.
How often should I inspect the extinguisher?
Perform a quick visual check monthly. Ensure the pin is intact, gauge is green, no visible damage, and the nozzle is clear. Have a professional inspect it annually.
Can I recharge the extinguisher myself?
No, recharging must be done by a certified fire equipment dealer after each use or if the pressure is low. Do not attempt to refill or tamper with the extinguisher.
What should I do after using the extinguisher?
Even if partially used, the extinguisher must be recharged or replaced. Dispose of spent dry chemical by vacuuming (wear a dust mask) – the residue is non-toxic but may irritate lungs.
Where should I mount the extinguisher?
Mount it on a wall in a visible, accessible location near exits and away from potential fire hazards. Install the included bracket 3-5 feet above the floor. Avoid areas where it can be blocked or knocked over.
What is the operating temperature range?
The Kidde PRO 210 is designed to operate between 40°F and 120°F (4°C to 49°C). Do not store where temperatures exceed this range, as pressure may drop or rise dangerously.
How long does the extinguisher discharge?
The usable discharge time is approximately 13-15 seconds. This is enough for small fires; always ensure you have a clear escape route.
Is the extinguisher safe for electronic equipment?
Yes, the dry chemical is non-conductive and safe for use on energized electrical equipment (Class C). However, the residue may damage sensitive electronics over time, so clean promptly if used on computers or appliances.
User questions about PRO 210 KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fire extinguisher in PDF format for free! Find your manual PRO 210 - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRO 210 by KIDDE.