EDV-12 - Cutting machine Edlund - Free user manual and instructions
Find the device manual for free EDV-12 Edlund in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cutting Machine (Food Slicer) |
| Brand | Edlund |
| Model | EDV-12 |
| Material | Stainless Steel and Anodized Aluminum |
| Blade Type | 12-inch Stainless Steel Serrated Blade |
| Cutting Thickness Range | 0 to 1 inch (0 to 25.4 mm) Adjustable |
| Maximum Product Size | 12 x 12 x 8 inches (305 x 305 x 203 mm) |
| Power Supply | 115V, 60Hz, 1.5A (Standard US Plug) |
| Motor Power | 1/4 HP (186 W) |
| Weight | 45 lbs (20.4 kg) |
| Dimensions (W x D x H) | 18 x 22 x 18 inches (457 x 559 x 457 mm) |
| Safety Features | Interlock Switch, Blade Guard, Non-Slip Feet, Emergency Stop |
| Cleaning | Removable Carriage and Blade; Hand Wash Recommended |
| Warranty | 1 Year Limited Warranty |
| Certifications | NSF, ETL Listed |
Frequently Asked Questions - EDV-12 Edlund
How do I adjust the slice thickness on the EDV-12?
Turn the thickness adjustment knob located on the side of the machine. Turn clockwise for thicker slices and counterclockwise for thinner slices. The scale indicates thickness in 1/16-inch increments.
Can I slice frozen meat with this machine?
No, the EDV-12 is designed for fresh or slightly chilled meat (above 32°F / 0°C). Frozen meat may damage the blade and motor.
How often should I sharpen the blade?
Sharpen the blade every 2-3 months under normal use, or when you notice tearing instead of clean cuts. Use the built-in sharpener (if equipped) or consult a professional.
What cleaning method is recommended for the EDV-12?
Unplug the machine, remove the carriage and blade guard. Wash parts with warm soapy water and dry thoroughly. Do not immerse the motor housing in water. Lubricate moving parts with food-grade mineral oil.
Why is the machine not starting?
Check that the power cord is securely plugged in and the interlock switch (blade guard) is properly engaged. Also verify that the emergency stop button is not depressed.
Can I slice vegetables and cheese?
Yes, the EDV-12 can slice firm vegetables (e.g., carrots, cucumbers) and hard cheeses. Soft cheeses may stick; use a slight chilling.
How do I replace the blade?
Always wear cut-resistant gloves. Remove the blade guard, loosen the blade nut using the provided wrench, and carefully lift out the blade. Install the new blade and tighten securely. Refer to the manual for torque specifications.
What should I do if the slices are uneven?
Check that the product is firmly pressed against the carriage fence and that the carriage moves smoothly. Also ensure the blade is sharp and properly aligned.
Is it safe to leave the machine plugged in overnight?
No, always unplug the machine when not in use to prevent accidental start-up and electrical hazards.
Where can I purchase replacement parts?
Replacement parts (blades, belts, carriage) can be ordered directly from Edlund or authorized distributors. Visit www.edlund.com or call 1-800-772-2126.
User questions about EDV-12 Edlund
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cutting machine in PDF format for free! Find your manual EDV-12 - Edlund and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EDV-12 by Edlund.