RCR-30 - Radio SANGEAN - Free user manual and instructions
Find the device manual for free RCR-30 SANGEAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Clock Radio |
| Brand | Sangean |
| Model | RCR-30 |
| Dimensions (approx.) | 25 cm x 15 cm x 10 cm |
| Weight (approx.) | 500 g |
| Power Source | AC 120V/60Hz or 230V/50Hz (depending on region), with battery backup (2 x AA) |
| Frequency Bands | FM (87.5-108 MHz), AM (520-1710 kHz) |
| Alarm System | Dual alarm with wake to radio or buzzer, snooze function |
| Display | Large LCD with adjustable brightness |
| Sleep Timer | Yes, adjustable up to 90 minutes |
| Bluetooth | No (optional via AUX) |
| Auxiliary Input | 3.5 mm AUX for external devices |
| Preset Stations | 10 AM, 10 FM |
| Clock Backup | Battery backup maintains clock/alarm during power outages |
| Speaker | Single full-range speaker, approx. 3 inches |
| Headphone Jack | 3.5 mm stereo headphone output |
| Antenna | FM wire antenna, AM built-in ferrite bar |
| Cleaning | Wipe with a soft, dry cloth. Do not use liquid cleaners. |
| Safety | Place on stable surface; avoid moisture and heat sources; unplug during storms. |
| Spare Parts / Repair | Contact Sangean customer service or authorized service centers. |
Frequently Asked Questions - RCR-30 SANGEAN
How do I set the time on my Sangean RCR-30?
Press and hold the Time Set button until the hour digits flash. Rotate the Tuning knob to adjust the hour, press Time Set again to set minutes, then rotate the knob to adjust. Press Time Set once more to confirm.
How do I set the alarm?
Press the Alarm 1 or Alarm 2 button until the alarm time flashes. Rotate the Tuning knob to set the hour, press the same button to set minutes, then rotate to adjust. Finally, press the alarm button again to confirm. Ensure the alarm indicator is lit.
What battery does the RCR-30 use for backup?
The clock uses two AA (LR6) alkaline batteries for backup to maintain time and alarm settings during a power outage.
How do I use the snooze function?
When the alarm sounds, press the Snooze button. The alarm will silence for 9 minutes and then reactivate. You can repeat this multiple times.
My radio has no sound. What should I check?
Ensure the volume is turned up, check if headphones are plugged in (they mute the speaker), and verify the antenna is properly extended. Also try a different station or switch to another source (if available).
Can I play music from my phone through the RCR-30?
Yes, if your phone has a headphone jack, connect it to the AUX IN port on the back using a 3.5mm audio cable. Then select AUX mode on the radio.
How do I adjust the display brightness?
Press the Dim button repeatedly to cycle through brightness levels (high, medium, low, off). Off mode still shows time momentarily when any button is pressed.
Why does the clock lose time when unplugged?
If backup batteries are not installed or are drained, the clock will reset when power is disconnected. Install fresh AA batteries in the compartment on the bottom.
How do I set the sleep timer?
Press the Sleep button repeatedly to set the desired sleep duration (15, 30, 45, 60, or 90 minutes). The radio will turn off automatically after that time.
Where can I find the user manual?
The user manual is available for free download on the notice-facile.com website. Search for Sangean RCR-30, and you can view or download the PDF.
User questions about RCR-30 SANGEAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Radio in PDF format for free! Find your manual RCR-30 - SANGEAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RCR-30 by SANGEAN.