PDU15SW10ATNET - Power strip CyberPower - Free user manual and instructions
Find the device manual for free PDU15SW10ATNET CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Switched Power Distribution Unit (PDU) |
| Model | PDU15SW10ATNET |
| Brand | CyberPower |
| Form factor | 1U rackmount |
| Dimensions (W x H x D) | 17.5 x 1.75 x 6.5 inches (445 x 44 x 165 mm) |
| Weight | 5.2 lbs (2.36 kg) |
| Nominal input voltage | 120V AC |
| Maximum input current | 15A |
| Maximum power | 1800W |
| Number of outlets | 10 individually switchable NEMA 5-15R |
| Network interface | RJ45 Ethernet (10/100 Mbps) |
| Management protocol | HTTP/HTTPS, SNMP, Telnet, SSH |
| Surge protection | Yes, 1080 Joules |
| Overload protection | 15A circuit breaker |
| Energy monitoring | Per-outlet current, voltage, power, and energy monitoring |
| Remote control | Individual outlet power on/off, reboot, and scheduling |
| Operating temperature | 32°F to 113°F (0°C to 45°C) |
| Safety certifications | UL 60950-1, cUL, FCC Class A |
| Maintenance | Wipe with dry cloth, avoid liquids |
| Spare parts and repairability | No user-serviceable parts; contact support for repairs |
Frequently Asked Questions - PDU15SW10ATNET CyberPower
How do I reset the PDU to factory defaults?
Press and hold the reset button on the front panel for 10 seconds using a paperclip until the LED flashes. This will restore factory default settings including username and password.
What is the default IP address and login?
The default IP address is 192.168.1.100, with username admin and password admin. You should change these upon initial setup for security.
Can I control outlets remotely?
Yes, via the web interface, SNMP, or optional RMCARD. You can turn outlets on/off, reboot, and set schedules for remote power management.
How do I update the firmware?
Download the latest firmware from CyberPower's website, then upload it through the web interface under the Administration -> Firmware Upgrade section. Do not disconnect power during update.
What does the LED status indicator show?
A solid green LED indicates normal operation. Flashing green means network activity. Solid red indicates an overload condition or fault.
How to set up outlet groups?
In the web interface, go to Outlet Control -> Outlet Group and assign outlets to groups for coordinated on/off actions. You can name each group.
What is the maximum load per outlet?
Each NEMA 5-15R outlet is rated for 15A maximum, but the total load must not exceed 15A or 1800W for the entire PDU.
Does this PDU support SNMP v3?
Yes, it supports SNMP v1, v2c, and v3 with authentication and encryption for secure management.
How to clear the energy usage logs?
Under Monitoring -> Energy Log, click the 'Clear' button or set a schedule to auto-clear. Logs are stored in the device's non-volatile memory.
What warranty does this PDU have?
CyberPower offers a 3-year limited warranty for this model, plus connected equipment coverage up to $150,000. Register online to activate.
User questions about PDU15SW10ATNET CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power strip in PDF format for free! Find your manual PDU15SW10ATNET - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDU15SW10ATNET by CyberPower.