TE150 - Scale Taylor - Free user manual and instructions

Product Type	Digital Receiving Scale
Brand	Taylor
Model	TE150
Capacity	150 lbs x 0.2 lb / 68 kg x 0.1 kg
Overload Capacity	157.4 lbs / 71.4 kg
Accuracy	+/-1% + 1 division
Platform Size	8-1/16" x 5"
Platform Material	Stainless steel
Product Dimensions	12 1/4" x 12" x 2 1/8"
Product Weight	9 3/4 lbs / 4.4 kg
Power Supply	120V adaptor (included) or 6 AA batteries (not included)
Display	LCD with 1.0" digits
Tare Function	Yes, via TARE/HOLD button
Hold Function	Yes, press and hold TARE/HOLD for 3 seconds
Unit Conversion	lb/kg button
Auto Shut-Off	2 minutes (can be disabled)
Low Battery Indicator	Yes, displays "bAtt"
Cord Length	6 ft coiled cord
Mounting	Wall-mountable control panel
Operating Temperature	40°F to 104°F
Warranty	One year limited
Legal for Trade	Not legal for trade
Calibration	Requires calibrated weight (150 lb or 60 kg)
Cleaning	Wipe with soft, lint-free cloth; do not immerse

Frequently Asked Questions - TE150 Taylor

How do I calibrate my Taylor TE150 scale?

To calibrate, turn off the scale. Press and hold TARE/HOLD and lb/kg buttons, then press ON. Release buttons when display shows 'CAL'. The scale will prompt you to place a calibrated weight (150 lb or 60 kg). Follow the display instructions and press TARE/HOLD to confirm.

What does the 'bAtt' display mean?

The 'bAtt' indicator means the battery is low. Replace the six AA batteries (alkaline recommended) or use the included 120V adaptor.

How do I use the tare function?

Place a container on the platform and press the TARE/HOLD button once. The display will reset to 0.0, allowing you to weigh only the contents added.

What does the hold function do?

Press and hold the TARE/HOLD button for 3 seconds to activate HOLD. The display will show 'H-on' and lock the current weight even after removing the load. Repeat to disable.

How do I switch between pounds and kilograms?

Press the lb/kg button on the control panel. A triangle indicator shows the current unit: lower left for lb, upper left for kg.

What happens if I overload the scale?

If the load exceeds capacity by more than 5%, the display shows 'oooo'. The TE150 overloads safely up to 157.4 lbs / 71.4 kg.

Can I disable the auto shut-off feature?

Yes. With the scale off, press and hold lb/kg then press ON. The display shows 'A_ofF' and auto-off is disabled. Repeat to enable ('A_on').

How do I clean the scale?

Do not immerse in water. Wipe with a soft, lint-free cloth. Avoid abrasive or corrosive cleaners to protect the plastic and electronics.

What is the warranty period?

The Taylor TE150 comes with a one-year limited warranty against defects in materials or workmanship from the date of original purchase.

What type of batteries does the scale use?

It uses six (6) AA batteries (alkaline recommended). Batteries are not included. You can also use the included 120V AC adaptor.

USER MANUAL TE150 Taylor

General Operation (cont.)

OVERLOAD

The scale can be overloaded by a maximum of 5% above the scale's capacity, as follows:

Max Load

TE150 157.4 lb / 71.4 kg

TE400 420 lb / 190.4 kg

POWER OFF

To turn the scale off, press the "OFF" button.

Calibration Function

Occasionally the scale's accuracy should be verified by measuring a known weight of the scale's approximate capacity. Tare the scale by pressing ZERO, place the weight on the platform and note the reading. Calibrate the scale if necessary. Calibration Procedure

You must use a CALIBRATED weight ONLY to properly recalibrate the scale.

- For the TE150, use a 150 lb calibrated weight (or 60 kg if operating in kilos).

- For the TE400, use a 400 lb calibrated weight (or 150 kg if operating in kilos).

1. While the scale is off, press and hold down the "TARE/HOLD" and "lb/kg" buttons. While holding down both these buttons, press the "ON" button to turn the scale on. When the display shows "8888" > "CAL", the scale is in calibration mode.

2. Release the buttons. The display will show “CX” with a number (CX150 for the TE150; CX400 for the TE400). Next the display will show a number (the zero count) between 4700 and 6000. (Note: if operating the scale in kilograms, the scale will instead show “C60” for the TE150 or “C150” for the TE400. If the zero count is outside the range, please contact customer service.)

3. Press the "TARE/HOLD" button. The display will show "XXX0".

4. Place a calibrated weight on the scale platform.

- For the TE150, use a 150lb (or 60 kg) calibrated weight.

- For the TE400, use a 400 lb (or 150 kg) calibrated weight. The display will show a number between 1800 and 2300 (the span count). Note: the span count must be stable on the display before proceeding to step 5. If the span count is outside this range, please contact customer service

1. Press the "TARE/HOLD" button. The following will appear on the display:

- For the TE150, the display will show “C150”>“End”>“150.0”

(or "C60"> "End"> "60.0" if operating in kilograms).

- For the TE400, the display will show “C400”> “End”> “400.0”

(or "C120"> "End"> "120.0" if operating in kilograms).

1. The calibration is complete. Remove the weight from the scale.

Display Signals

LCD Shows

Low Battery bAtt

Load is greater than

Maximum Overload 0000

Precautions

This scale is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions:

1. Always read instructions thoroughly to ensure that you have the full benefit of all the unit's features.

2. DO NOT immerse unit in water, as doing so will cause damage to internal components and void the warranty. If you spill liquid on it, dry it immediately with a soft, lint-free cloth.

3. DO NOT clean the unit with an abrasive or corrosive material. This may scratch the plastic parts and corrode the electronic circuits.

4. DO NOT subject the units to excessive force, shock, dust, temperature or humidity. This may result in malfunction, shorter electronic life span, damaged battery and distorted parts.

5. DO NOT tamper with the unit's internal components. Doing so will invalidate the warranty on the units and may cause damage. The unit contains no user-serviceable parts.

6. Only use fresh batteries, as old batteries may leak and cause damage to the unit. Remove the batteries if the scale will not be used for a long period of time.

7. DO NOT dispose of batteries in fire. Disposing of this product in fire could cause batteries to explode or leak.

Specifications

Platform Size: 8-1/16" x 5"

Power: 120V adaptor (included) or six (6) "AA" batteries (not included)

Dimensions: 12 1/4" x 12" x 2 1/8"

Weight: 9 3/4 lbs / 4.4 kgs

Operating Temperature Range: 40°F to 104°F

Accuracy: +/-1% + 1 division

Capacity: TE150 150 lbs x 0.2 lb

150 lbs x 14 lb

68 kgs x 0.1 kg

TE400 400 lbs x 0.5 lb

400 lbs x 12 lb

181 kgs x 0.2 kg

Overload: TE150 157.4 lbs / 71.4 kgs

TE400 420 lbs / 190.4 kgs

Platform: TE150 Stainless steel

TE400 Tread painted steel

One Year Limited Warranty

This product is warranted against defects in materials or workmanship for one (1) year from date of original purchase. It does not cover damages or wear resulting from accident, misuse, abuse, or unauthorized adjustment and/or repair. Should this product require service (or replacement at our option) while under warranty, please pack the item carefully and return it prepaid, along with receipt showing date of purchase and a note explaining reason for return to:

Taylor Precision Products

2220 Entrada Del Sol, Suite A

Las Cruces, New Mexico 88001

Customer Service Phone: [phone]

Customer Service Fax: [phone]

www.taylorusa.com

There are no expressed warranties except as listed above. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

©2009 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® and Leading the Way in Accuracy® are registered trademarks of Taylor Precision Products and its affiliated companies. All rights reserved.

Made to our exact specifications in China.

NOT LEGAL FOR TRADE

TE150/TE400 11.09

TAYLOR

TE150 / TE400

Digital

Receiving Scale

Leading the Way in Accuracy®

Line drawing of a digital balance scale with a coiled cable and digital display (no text or symbols)

Model TE150
Model TE400

Instruction Manual

Thank you for purchasing a Taylor® Digital Receiving Scale. Your scale is an example of superior design and craftsmanship. In order to optimize its function, be sure the read this instruction manual carefully before use. Keep instructions handy for future reference.

Description of Parts

Model TE400 Shown

Main Features

- LCD Screen

1.0" digits display weight.

- Tare/Hold Button

When pressed once, the scale will tare (zero out) the weight on the platform. When presses and held for 3 seconds, the weight will continue to display, even after the weight is removed.

- lb/kg Button

When pressed, the weight display converts from pounds to kilograms.

- On Button

When pressed, turns the scale "ON".

- Off Button

When pressed, turns the scale "OFF".

- Auto Shut Off

Powers off after 2 minutes of non-use.

- Low Battery Indicator

Appears on LCD screen when battery is low.

- Cord

6' coiled cord

- Control Panel

Can be stationary or mounted to a wall.

- Platform

Model TE150 has a stainless steel finish. Model TE400 has a tread painted steel finish.

Before You Begin

1. Remove the scale from its box, along with the control panel and the 120V adaptor.
2. If using the 120V adaptor, plug one end into the receptacle (connector) at the rear of the scale. Insert the other end (the transformer) into a 120V outlet.

Auto Shut-Off Feature

To disable the 2 minute auto-shut off feature:

1. While the scale is off, press and hold "lb/kg", then press "ON".
2. The LCD shows "8888", then "A_oF". Release the buttons. The scale shows will show "0.0". The auto-off is disabled.
3. To enable the auto-off feature, repeat Steps 1 and 2. The LCD shows "8888", then "A_on", then "0.0". The auto off is enabled.

Battery Installation

The Digital Receiving Scale operates with 6 “AA” batteries, not included (alkaline recommended).

1. Place the scale upright on a flat surface. Lift the platform cover from the top of the scale.
2. Remove the battery compartment door and insert batteries into the compartment.
3. Replace the compartment door. Replace the platform cover on the scale.

Mounting the Scale

1. Mount the bracket to a wall using 2 screws (not included) that are appropriate anchors for the mounting surface.
2. Lower the control panel into the mounted bracket. Insert the flat tip of the included screws through the round holes in the mounting bracket. Drive the screws into the existing threaded hold in the lower half of the control panel to secure the control panel to the bracket.

Display and Function

General Operation

POWER

To turn the scale on, press the button marked “ON”. The display will first show “8888” followed by “0.0”. The scale is ready for use.

WEIGHING

When the display shows “0.0”, the scale is ready to weigh an object. If the object exceeds the capacity of the scale by more than 5%, the display will show “oooo” (for overload). Until the overload condition is reached, additional objects may be placed on the platform. The display will show the sum of the weights of all the objects. When one of multiple objects is removed from the platform, the weight of the remaining objects will display.

TARE OPERATION

To tare (zero out) a load on the platform (example: the weight of a container), press the “TARE/HOLD” button. The display will show the value “0.0”. During the “TARE” mode, a new item can be added to the platform. The display will show the sum of the weights of the added items. Another item may be added, if desired. The display will show the sum of all additional item weights above and beyond the tared out load.

TARE CAPABILITY

A load of up to the capacity of the scale can be tared (zeroed out), while still allowing the weighing of an additional object, up to the full capacity of the scale.

Example: Model TE150 has a capacity of 150 lbs. If an item weighing 20 pounds is on the scale, and the weight is tared (zeroed out), and additional load or loads of up to 130 lbs can be weighed. (On a 10 pound scale (TE10), a load of 5 lbs (50%) can be tared out.

MINUS WEIGHT

If a weight is tared (zeroed out) and is then removed from the platform, the display will show a minus value.

For example, if a load of 50 lbs is placed on the platform and the “TARE/HOLD” button is pressed, the display will show “0.0”. If the weight is then removed from the platform, the display will show “-50.0”. If the minus value exceeds -99.9 lbs, the display will show “----”.

To reset the minus weight to zero, press the “TARE/HOLD” button.

HOLD OPERATION

The “HOLD” function may be used to lock the weight on the display, even after the load is removed from the platform. To use the hold function, press and hold the “HOLD” button for 3 seconds. The display will show “H-on”, indicating the hold feature is on.

To cancel the hold function, press and hold the “HOLD” button for 3 seconds. The display will show “H-oF”, indicating the hold feature is off.

When the Hold function is on, the weight will continue to display, even after the item has been removed from the platform.

UNIT CONVERSION

Press the “lb/kg” button on the front panel to switch between pound and kilogram units of measurement. A small triangle appears in the upper left corner of the display for kg mode, or on the lower left corner for lb mode.