2000 - Scale Taylor - Free user manual and instructions
Find the device manual for free 2000 Taylor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Scale |
| Brand | Taylor |
| Model | 2000 |
| Weight Capacity | 330 lb / 150 kg |
| Division | 0.1 lb / 50 g |
| Display | LCD |
| Power Source | 2 x AAA batteries (included) |
| Auto-Off | Yes, after 30 seconds of inactivity |
| Tare Function | Yes |
| Unit Selection | lb / kg / st |
| Platform Material | Tempered glass |
| Platform Dimensions | 11.8 x 11.8 in (30 x 30 cm) |
| Overload Indicator | Yes |
| Low Battery Indicator | Yes |
| Cleaning | Wipe with damp cloth; do not immerse |
| Safety | Non-slip feet; use on hard, flat surface |
Frequently Asked Questions - 2000 Taylor
How do I change the unit from lb to kg?
Press the UNIT button on the back or bottom of the scale to toggle between lb, kg, and st.
Why does the scale show 'Err' or 'O-Ld'?
The 'Err' or 'O-Ld' message indicates overload. The weight exceeds the maximum capacity of 330 lb / 150 kg. Remove the excess weight immediately to avoid damage.
How do I replace the batteries?
Open the battery compartment on the bottom of the scale. Remove old batteries and insert two new AAA batteries with correct polarity. Close the compartment.
How to calibrate or zero the scale?
Place the scale on a hard, flat surface. Press the scale to turn it on, wait for '0.0' to appear. If it does not show zero, press the TARE or ZERO button (if available). For calibration, refer to the manual; many Taylor scales are pre-calibrated.
What should I do if the display is dim or shows 'Lo'?
A dim display or 'Lo' message indicates low battery. Replace the batteries as described above.
Can I use the scale on carpet?
For accurate readings, place the scale on a hard, flat surface. Carpet can cause inaccurate measurements.
How do I clean the scale?
Use a damp cloth to wipe the surface. Do not use abrasive cleaners or immerse the scale in water.
How to weigh with a container (tare function)?
Place the empty container on the scale and press the TARE button to reset the display to zero. Then add the ingredient; the display shows only the weight of the content.
My scale shows inconsistent weights. What's wrong?
Ensure the scale is on a level, hard surface. Avoid moving while weighing. Batteries may be low. Also, allow the scale to warm up for a few seconds after powering on.
The scale won't turn on. What should I check?
Check if the batteries are correctly inserted and have sufficient charge. Try pressing the center of the platform to wake it up. If still not working, ensure the battery contacts are clean and not corroded.
User questions about 2000 Taylor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Scale in PDF format for free! Find your manual 2000 - Taylor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2000 by Taylor.
USER MANUAL 2000 Taylor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Taylor
Model : 2000
Category : Scale