P4010ACLEDS-2 - Smoke detector KIDDE - Free user manual and instructions
Find the device manual for free P4010ACLEDS-2 KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke Detector (Hardwired with Battery Backup) |
| Brand | Kidde |
| Model | P4010ACLEDS-2 |
| Dimensions | Approximately 5.6 x 1.6 inches (142 x 41 mm) |
| Weight | 0.6 lbs (272 g) |
| Power Source | 120V AC hardwired with 10-year sealed lithium battery backup |
| Sensor Type | Photoelectric |
| Features | LED indicator, Silence button, Test/Reset button, Hush feature, End-of-life warning |
| Interconnectivity | Up to 24 units (smoke/CO) via interconnect wire |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Humidity Range | Up to 85% relative humidity, non-condensing |
| Warranty | 10-year limited warranty |
| Maintenance | Clean with vacuum cleaner brush attachment; do not paint |
| Safety Certifications | UL listed, meets NFPA 72 |
| Spare Parts | Not user-serviceable; sealed battery lasts 10 years |
| Installation | Ceiling or wall mount, included mounting bracket and hardware |
Frequently Asked Questions - P4010ACLEDS-2 KIDDE
How do I silence a false alarm?
Press the Silence/Hush button to temporarily silence the alarm for approximately 8-10 minutes. The detector will automatically reset after that period.
What does the chirping sound mean?
A chirp every 30-40 seconds typically indicates a low battery or end-of-life warning. For this model, the sealed battery lasts 10 years; chirping after 10 years means the unit must be replaced.
Can I interconnect multiple detectors?
Yes, this detector can be interconnected with up to 24 compatible Kidde smoke or CO detectors using the interconnect wire. When one alarm detects smoke, all interconnected alarms will sound.
How do I test the detector?
Press and hold the Test/Reset button for 5 seconds. The alarm should sound within a few seconds. Release the button to stop the test.
Why is the red LED flashing?
A flashing red LED indicates normal operation (once per minute). A rapid flash or steady light may indicate an alarm condition or fault.
How often should I clean the detector?
Clean the detector at least once a month using a vacuum cleaner with a soft brush attachment to remove dust and debris from the vents.
What is the Hush feature?
The Hush feature allows you to temporarily silence nuisance alarms (e.g., from cooking) by pressing the Hush button. The detector will reduce sensitivity for about 8 minutes.
How do I know when to replace the detector?
This model has a 10-year sealed battery. The unit will chirp and flash a red LED when it reaches end-of-life. Replace the entire detector immediately.
Can I paint the detector?
No, painting the detector can block the sensors and prevent proper operation. Keep the unit clean and unpainted.
What does a continuous alarm mean?
A continuous loud alarm indicates smoke or fire. Evacuate the premises immediately and call emergency services. Do not re-enter until safe.
User questions about P4010ACLEDS-2 KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual P4010ACLEDS-2 - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P4010ACLEDS-2 by KIDDE.