Speed Charger 650 - Battery charger ProMaster - Free user manual and instructions
Find the device manual for free Speed Charger 650 ProMaster in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery Charger |
| Brand | ProMaster |
| Model | Speed Charger 650 |
| Compatible Battery Chemistries | NiMH, NiCd, Li-ion (select models) |
| Input Voltage | AC 100-240V, 50/60Hz |
| Output Voltage | 1.2V - 4.2V (depending on battery type) |
| Charging Current | Adjustable up to 650mA |
| Number of Charging Slots | 4 independent slots |
| Dimensions (approx.) | 150 x 80 x 50 mm |
| Weight (approx.) | 300 g |
| Protection Features | Short circuit, reverse polarity, overcharge, overheat |
| Display / Indicators | LED indicators for each slot (charging/complete) |
| Charging Modes | Standard charge, fast charge, trickle charge |
| Power Source | AC mains (power cord included) |
| Maintenance | Clean with dry cloth; keep vents free of dust |
| Safety Certifications | CE, RoHS |
| Spare Parts Available | Power cord (standard IEC C7) |
| Repairability | No user-serviceable parts; contact authorized service center |
| Operating Temperature | 0°C to 40°C |
| Warranty | 1 year limited |
Frequently Asked Questions - Speed Charger 650 ProMaster
What types of batteries can the Speed Charger 650 charge?
The Speed Charger 650 is compatible with NiMH, NiCd, and Li-ion batteries (AA, AAA, 18650, etc.). Always check the battery chemistry before charging.
How long does it take to charge a typical AA battery?
Charging time depends on battery capacity and current. For a 2000mAh NiMH AA, using the maximum 650mA current, it takes approximately 3-4 hours.
Can I charge different battery types at the same time?
Yes, each slot is independent. You can charge NiMH, NiCd, and Li-ion batteries simultaneously, but ensure each battery is inserted correctly.
Does the charger have overcharge protection?
Yes, the charger includes overcharge protection. Once a battery is fully charged, the LED turns green and the charger switches to trickle mode.
What do the LED indicators mean?
Red LED: charging in progress. Green LED: battery fully charged or no battery. Flashing red: error (e.g., defective or non-rechargeable battery).
Can I charge rechargeable batteries that are not completely discharged?
Yes, you can charge batteries at any state of charge. The charger will detect the voltage and apply appropriate current. No memory effect for NiMH/Li-ion.
Is the charger safe to leave unattended?
Yes, the charger has multiple safety features including overheat and short circuit protection. However, it is recommended to monitor charging occasionally.
What should I do if an LED flashes red?
A flashing red LED indicates a problem: non-rechargeable battery, reverse polarity, or defective cell. Remove the battery and check it. If the issue persists, try a different battery.
How do I clean and maintain the charger?
Unplug the charger and wipe with a dry, soft cloth. Do not use liquids or abrasives. Ensure the ventilation slots are free from dust.
Where can I find a replacement power cord?
The charger uses a standard IEC C7 power cord. You can purchase one from any electronics store or online retailer. Ensure it matches your region's plug type.
User questions about Speed Charger 650 ProMaster
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual Speed Charger 650 - ProMaster and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Speed Charger 650 by ProMaster.