R182-P91 - Server GIGABYTE - Free user manual and instructions
Find the device manual for free R182-P91 GIGABYTE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Server |
| Model | R182-P91 |
| Form Factor | 1U |
| Dimensions (H x W x D) | 1.7 x 17.2 x 20.0 inches (4.3 x 43.7 x 50.8 cm) |
| Weight (approx.) | 30 lbs (13.6 kg) |
| Power Supply | Dual redundant 800W (80+ Platinum) |
| Processor Support | Dual Intel Xeon Scalable (Cascade Lake or later) |
| Memory | 16 DDR4 DIMM slots, up to 2TB (2933/2666 MHz) |
| Storage | 8 x 2.5" SATA/SAS drive bays; supports NVMe |
| RAID Support | Hardware RAID via optional controller (0/1/5/10) |
| Expansion Slots | 2 x PCIe 3.0 x16, 1 x PCIe 3.0 x8 (low-profile) |
| Networking | Dual 10GbE ports (Intel X550 or similar) |
| Management | IPMI 2.0 dedicated port, BMC with web GUI |
| Front Panel | Power button, ID button, activity LEDs, USB 3.0 |
| Cooling | 4 x hot-swappable system fans (dual rotor) |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Compliance | CE, FCC, RoHS |
| Maintenance & Cleaning | Clean external surfaces with dry cloth; vacuum dust from vents quarterly |
| Safety | Use anti-static strap during component handling; disconnect power before service |
| Spare Parts & Repairability | Replaceable PSUs, fans, HDDs, memory, RAID card; consult manual for FRU list |
| General Information | Designed for data centers, virtualization, and high-performance computing |
Frequently Asked Questions - R182-P91 GIGABYTE
How do I initialize the server for the first time?
Connect power, network, and VGA/USB peripherals. Press the power button. Access the BIOS by pressing Del during boot. Configure boot order and enable IPMI for remote management.
What type of CPUs are supported?
The R182-P91 supports dual Intel Xeon Scalable processors (Cascade Lake or newer). Refer to the CPU compatibility list for specific SKUs.
How can I configure RAID?
Install an optional RAID controller (e.g., LSI/Avago). Enter the RAID BIOS utility (Ctrl+R or Ctrl+C during boot) to create arrays. For software RAID, use the OS tools.
Can I use NVMe drives?
Yes, the server supports NVMe drives in specific slots (consult manual). NVMe drives provide higher throughput compared to SATA/SAS.
How do I access the IPMI management interface?
Connect to the dedicated management port. Default IP is 192.168.0.120 (change via BIOS). Use a web browser to access the BMC GUI with default credentials (admin/admin).
What is the maximum memory capacity?
The server supports up to 2TB using 128GB DDR4 modules across 16 slots. Registered ECC memory is required.
How do I replace a failed power supply?
The PSUs are hot-swappable. Unlock the retention lever, pull the faulty unit out, and insert a new one. Ensure the replacement matches the rated wattage (800W).
Can I install a GPU in this server?
Yes, but limited to low-profile cards due to slot height. The server has two PCIe x16 slots that can accommodate single-slot GPUs for acceleration.
How often should I clean the server?
Clean external surfaces quarterly with a dry cloth. Use compressed air to remove dust from fans and heat sinks every 6 months to prevent overheating.
Where can I find the latest firmware and drivers?
Visit the Gigabyte support website and search for R182-P91. Download BIOS, BMC, and driver updates. Follow the included flashing instructions.
User questions about R182-P91 GIGABYTE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual R182-P91 - GIGABYTE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. R182-P91 by GIGABYTE.