GMV-24WL/C-T(U) - Air-conditioner GREE - Free user manual and instructions
Find the device manual for free GMV-24WL/C-T(U) GREE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split air conditioner (indoor + outdoor unit) |
| Model | GMV-24WL/C-T(U) |
| Brand | Gree |
| Cooling Capacity | 24000 BTU/h (approx. 7.0 kW) |
| Heating Capacity | 27000 BTU/h (approx. 7.9 kW) |
| Power Supply | 220-240V ~ 50Hz, 1 Phase |
| Indoor Unit Dimensions (WxHxD) | 1078 x 320 x 245 mm |
| Outdoor Unit Dimensions (WxHxD) | 900 x 750 x 340 mm |
| Indoor Unit Weight | 14 kg |
| Outdoor Unit Weight | 42 kg |
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.2 (approx.) |
| Cop (Coefficient of Performance) | 3.6 (approx.) |
| Compressor Type | Rotary (inverter) |
| Airflow Rate (Indoor) | 700 m³/h (max.) |
| Noise Level (Indoor) | 31-42 dB(A) |
| Noise Level (Outdoor) | 54 dB(A) |
| Key Functions | Cooling, heating, dehumidification, fan, auto mode, sleep mode, timer, turbo |
| Filter Type | Washable antibacterial mesh filter |
| Remote Control | Infrared with backlight display |
| Installation Type | Wall-mounted |
Frequently Asked Questions - GMV-24WL/C-T(U) GREE
What is the recommended installation height for the indoor unit?
The indoor unit should be installed at least 2.3 meters above the floor and at least 15 cm from the ceiling to ensure proper airflow.
How do I clean the air filters?
Turn off the unit and open the front panel. Remove the filters and wash them with lukewarm water. Allow them to dry completely before reinstalling. Clean every two weeks for optimal performance.
What does the 'E5' error code mean?
E5 indicates a communication error between the indoor and outdoor units. Check the wiring connections and restart the system. If the problem persists, contact a Gree service center.
Can I use an extension cord for power?
No. The air conditioner must be connected directly to a dedicated power outlet with the correct voltage (220-240V). Using an extension cord can cause overheating or fire hazards.
How do I switch between cooling and heating modes?
Press the MODE button on the remote control until the desired symbol appears: snowflake for cooling, sun for heating, raindrop for dry, fan for fan-only, and auto for automatic temperature control.
What is the maximum pipe length for the refrigerant line?
The maximum recommended pipe length is 15 meters. If longer lines are required, consult an authorized installer for proper sizing and additional refrigerant charge.
How can I reduce energy consumption?
Set the thermostat to 24°C (75°F) for cooling and 20°C (68°F) for heating. Use the timer and sleep mode, and keep doors and windows closed. Clean filters regularly to maintain efficiency.
Why is the outdoor unit not running?
Check if the power supply is on, the indoor unit is set to a mode that requires the outdoor unit (cool/heat), and there is no obstruction. Also, the unit may be in delay protection mode for 3 minutes after startup.
How do I reset the remote control?
Remove the batteries, press any button for 10 seconds to discharge residual power, then reinsert fresh batteries. The remote should sync automatically with the unit.
What maintenance is required for the outdoor unit?
Keep the outdoor unit free from debris, leaves, and snow. Ensure at least 30 cm clearance around it. Clean the coils with a soft brush or water jet (without damaging fins) once a year.
User questions about GMV-24WL/C-T(U) GREE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual GMV-24WL/C-T(U) - GREE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GMV-24WL/C-T(U) by GREE.