MX-M6051 - Printer SHARP - Free user manual and instructions

Find the device manual for free MX-M6051 SHARP in PDF.

SHARP MX-M6051 - Printer
📄 854 pages English EN ⬇ Download 💬 AI Question ❓ 11 questions ⚙️ Specs
Notice SHARP MX-M6051 - page 6
6 / 854
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Monochrome Multifunction Printer (MFP)
Functions Print, Copy, Scan, Optional Fax
Print Speed Up to 60 ppm (A4)
Print Resolution 1200 x 1200 dpi
Scan Resolution Up to 600 x 600 dpi
Paper Capacity (Standard) 1,100 sheets (two trays)
Maximum Paper Capacity Up to 6,600 sheets with options
Paper Sizes Supported A3, A4, A5, B4, B5, Legal, Letter, Custom
Duplex Printing Automatic (standard)
Connectivity Ethernet 10/100/1000Base-T, USB 2.0, Optional Wi-Fi
Display 10.1-inch Color Touchscreen
Dimensions (W x D x H) 620 x 693 x 1154 mm (without options)
Weight Approximately 85 kg (without options)
Power Requirements 220-240V, 50/60 Hz
Power Consumption (Max) 1,840 W
Security Features Secure Print, User Authentication, IP Filtering
Warm-up Time Approximately 30 seconds (from power save)
First Print Out Time (FPOT) Approximately 3.5 seconds (A4)
Toner Cartridge Yield Approximately 28,000 pages (black)
Drum Life Approximately 250,000 pages
Maintenance Kit Replacement every 300,000 pages (typical)
Supported Operating Systems Windows, Mac, Linux (via PPD)
Warranty 1 year on-site (may vary by region)

Frequently Asked Questions - MX-M6051 SHARP

How do I load paper in the Sharp MX-M6051?
Open the paper tray, adjust the guides to the paper size, load paper with the print side facing up, and close the tray. For the bypass tray, lift the cover, load paper, and set the paper type on the touchscreen.
How do I replace the toner cartridge?
Open the front cover, pull out the old toner cartridge, unpack the new one, shake it gently, insert it until it clicks, and close the cover. The machine will automatically start the calibration.
How do I clear a paper jam?
Check the touchscreen for jam location indicators. Open the relevant covers (duplex unit, fuser, trays) and gently remove any jammed paper. Avoid tearing the paper. Close all covers to resume printing.
How do I connect the MX-M6051 to a network?
Connect an Ethernet cable to the network port on the back. On the touchscreen, go to System Settings > Network Settings > IPv4 (or IPv6) and configure the IP address manually or via DHCP. For wireless, the optional Wi-Fi kit is required.
How do I perform a scan to email?
From the home screen, select Scan, then Email. Enter the recipient's email address using the virtual keyboard, adjust scan settings (resolution, file type), and press Start. Ensure the SMTP server is configured in System Settings.
How do I clean the scanner glass?
Turn off the machine. Open the document feeder cover. Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner to wipe the glass. Do not use abrasive cleaners. Close the cover and turn on.
How do I reset the maintenance count?
After replacing the drum or maintenance kit, navigate to System Settings > Maintenance > Reset Maintenance Counter. Enter the appropriate code (if prompted) and confirm. Refer to the manual for exact steps.
What types of paper can I use?
The MX-M6051 supports plain paper, recycled paper, letterhead, envelopes, labels, and thick paper (up to 300 g/m² for bypass tray, up to 220 g/m² for trays). Use the bypass tray for special media.
How do I print from a USB flash drive?
Insert the USB drive into the USB port on the front panel. On the touchscreen, press USB Memory, select the file, adjust print settings, and press Start. The file must be in PDF, TIFF, JPEG, or XPS format.
How do I replace the drum unit?
Open the front cover, remove the toner cartridge, then pull out the drum unit. Insert the new drum unit, replace the toner cartridge, and close the cover. The machine will display a message to reset the drum counter.

User questions about MX-M6051 SHARP

1 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

How to clean the internal rollers of the SHARP MX-M6051?
Frequently Asked Questions - 12 d
Response Notice-Facile

Cleaning the internal rollers of the SHARP MX-M6051 is an important maintenance operation to maintain print quality and the lifespan of the device. Here are the essential points:

Preventive Maintenance

  • SHARP recommends replacing the maintenance kit every 300,000 pages. This kit includes rollers and other wear components, which is the most effective way to keep the rollers in good condition.

Manual Cleaning

For regular cleaning without complete replacement:

  • Turn off the printer before any intervention
  • Access the rollers by opening the maintenance access cover (refer to the manual for its exact location)
  • Use a dry, lint-free cloth to gently clean the surfaces of the rollers
  • Avoid aggressive cleaning liquids that could damage the coatings

Important

Internal cleaning of the rollers on a professional multifunction printer like the MX-M6051 can be delicate and may risk damaging sensitive components. For thorough cleaning or if you are not familiar with accessing internal components, it is best to call a qualified SHARP technician. This also ensures the maintenance of your warranty.

Respond (be the first)

Download the instructions for your Printer in PDF format for free! Find your manual MX-M6051 - SHARP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX-M6051 by SHARP.

USER MANUAL MX-M6051 SHARP

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SHARP

Model : MX-M6051

Category : Printer