513-1417V5 - Clock LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free 513-1417V5 LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Atomic Wall Clock |
| Model Number | 513-1417V5 |
| Brand | La Crosse Technology |
| Display | Analog with digital date display |
| Time Synchronization | Atomic (WWVB radio signal) |
| Power Source | 1 AA battery (not included) |
| Battery Life | Approximately 12 months |
| Dimensions | 12.5 x 1.5 x 12.5 inches (31.8 x 3.8 x 31.8 cm) |
| Weight | 1.2 lbs (0.54 kg) |
| Color | Black frame with white dial |
| Mounting | Wall mount or desk stand |
| Date Display | Day of week and date (automatic calendar) |
| Indoor Temperature | Not applicable (clock only) |
| Humidity Display | Not applicable |
| Time Zone Setting | Manual selection (US time zones) |
| Daylight Saving Time | Automatic DST adjustment (user selectable) |
| Material | Plastic casing, glass lens |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Cleaning | Wipe with a soft, dry cloth |
| Battery Disposal | Recycle according to local regulations |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - 513-1417V5 LA CROSSE TECHNOLOGY
How do I set up the clock?
Insert 1 AA battery into the compartment. The clock will automatically search for the atomic time signal. For best reception, place near a window away from electronics.
How long does the atomic sync take?
Initial sync may take up to 24 hours. The clock will attempt to sync nightly. Ensure the clock is within range of the WWVB transmitter (Fort Collins, CO).
Why is the time wrong?
Check that the time zone and DST settings are correct. If the clock did not sync, press and hold the SET button to force a manual sync. Also, try relocating the clock.
How do I change the time zone?
Press the SET button for 3 seconds to enter settings. Use the + or - buttons to cycle through time zones (EST, CST, MST, PST, etc.). Press SET to confirm.
Does the clock automatically adjust for DST?
Yes, DST adjustment is enabled by default. If you are in an area that does not observe DST, you can disable it in the settings menu.
What type of battery does it use?
The clock requires 1 AA alkaline battery. Do not use rechargeable batteries as they may provide lower voltage.
How do I mount the clock on the wall?
Use a single nail or screw (not included) to hang the clock via the keyhole slot on the back. Ensure the wall mount is securely anchored.
Why is the clock not showing the correct date?
The date is automatically set when the atomic signal is received. If the date is off, ensure the clock has synced. Manually set the date if needed via the settings.
Can I turn off the radio signal search?
Yes, you can disable the atomic sync by pressing and holding the '+' button for 5 seconds. The clock will then operate as a standard quartz clock.
My clock is not working. What should I do?
First, check the battery orientation and replace if necessary. Ensure the battery contacts are clean. Perform a factory reset by removing the battery and pressing any button for 10 seconds, then reinsert the battery.
User questions about 513-1417V5 LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Clock in PDF format for free! Find your manual 513-1417V5 - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 513-1417V5 by LA CROSSE TECHNOLOGY.