PTAU55 - Receiver Pyle - Free user manual and instructions
Find the device manual for free PTAU55 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Pyle |
| Model | PTAU55 |
| Dimensions (W x H x D) | 17.3 x 4.1 x 10.2 inches |
| Weight | 8.5 lbs |
| Power Supply | 120V AC, 60Hz |
| Power Consumption | 250W |
| Output Power | 100W per channel (RMS) |
| Frequency Response | 20Hz - 20kHz |
| Tuner Bands | AM / FM |
| Inputs | USB, SD Card, AUX, Phono |
| Outputs | Speaker A/B, Headphone, Record Out |
| Bluetooth | Yes, built-in |
| Remote Control | Included |
| Speaker Impedance | 4 - 16 ohms |
| Signal-to-Noise Ratio | 80 dB |
| Material | Metal chassis, plastic front panel |
| Maintenance | Wipe with a soft, dry cloth |
| Safety | Keep away from liquids and heat sources |
| Included in Box | Receiver, remote control, FM antenna, manual |
Frequently Asked Questions - PTAU55 Pyle
How do I connect speakers to the PTAU55 receiver?
Use speaker wire with banana plugs or bare wire. Connect to the Speaker A or Speaker B terminals on the rear panel, matching polarity (red to +, black to -).
Can I play music from a USB drive?
Yes, insert a USB flash drive into the USB port on the front panel. The receiver supports MP3 and WMA files.
How do I set up the FM antenna?
Connect the included wire antenna to the FM antenna terminals. Extend the wire fully for best reception. For improved reception, consider an external FM antenna.
Why is there no sound from the speakers?
Check that the speaker wires are securely connected, the Speaker A/B button is enabled, the volume is turned up, and the correct input source is selected.
How do I pair a Bluetooth device?
Press the Bluetooth button on the receiver or remote. Enable Bluetooth on your phone and select 'PTAU55' from the list. No password is required.
Can I use the receiver with a turntable?
Yes, connect your turntable to the Phono input on the rear panel. Ensure your turntable has a built-in preamp or use an external one.
What is the maximum power output?
The PTAU55 delivers up to 100W per channel into 8 ohm speakers (RMS).
How do I reset the receiver?
Turn off the receiver and unplug it for 30 seconds. Plug it back in and turn on. This clears any temporary glitches.
Can I connect a subwoofer?
The receiver does not have a dedicated subwoofer output. You can connect a powered subwoofer using the Pre Out jacks if available, or from speaker level inputs.
What should I do if the remote control stops working?
Replace the two AAA batteries in the remote. Ensure there are no obstructions between the remote and the receiver's sensor. Try pointing directly at the front panel.
User questions about PTAU55 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PTAU55 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PTAU55 by Pyle.