MMA3650 - Loudspeaker MAGNAVOX - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Magnavox
Model	MMA3650
Dimensions (W x H x D)	20 x 10 x 10 cm
Weight	0.5 kg
Power Source	Built-in rechargeable battery (USB charging)
Battery Life	Up to 8 hours
Connectivity	Bluetooth 5.0, AUX input
Speaker Type	Full-range stereo driver
Output Power	10W
Frequency Response	80 Hz - 20 kHz
Controls	Power, Volume, Play/Pause, Track skip
Water Resistance	IPX4 (splash-proof)
Included Accessories	USB charging cable, AUX cable, user manual
Compatible Devices	Smartphones, tablets, laptops
Maintenance	Wipe with dry cloth. Do not use liquids.
Safety	Do not expose to extreme temperatures or moisture.
Repairability	Contact Magnavox support for spare parts.

Frequently Asked Questions - MMA3650 MAGNAVOX

How do I pair my Magnavox MMA3650 with my phone?

Turn on the speaker, enable Bluetooth on your phone, select Magnavox MMA3650 from the list, and confirm pairing.

How long does the battery last on a full charge?

The built-in battery provides up to 8 hours of playback at moderate volume.

Can I use the speaker while charging?

Yes, you can use the speaker while it is connected to a USB power source.

Does the MMA3650 have a microphone for hands-free calls?

Yes, it has a built-in microphone that allows you to answer calls hands-free.

What is the Bluetooth range?

The effective Bluetooth range is up to 10 meters (33 feet) in open space.

Is the speaker water-resistant?

Yes, it has an IPX4 rating, meaning it can withstand splashes of water from any direction.

How do I reset the speaker?

Press and hold the Power and Volume Up buttons simultaneously for 5 seconds until the LED flashes.

Can I connect two speakers for stereo sound?

This model does not support wireless stereo pairing. Use a wired AUX connection to a stereo source.

What type of charging cable is included?

A standard USB-A to Micro USB cable is included for charging.

How do I clean the speaker?

Use a soft, dry cloth to wipe the exterior. Avoid using any liquids or sprays.

USER MANUAL MMA3650 MAGNAVOX

with Bluetooth® Wireless Technology

OWNER'S MANUAL

MODEL: MMA3650

FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference or communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna. - Inverse the connection between the environment and

- Increase the saturation between the aquiphilix and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

- Consult the dealer or an experienced radio/TV

technician for her

[Non-Text]

FCC STATEMENT:

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, as

(2) This device must accept any interference received, including interference that may cause undesired

operation. 2. Changes on modifications not approved by

1. Changes of modifications for expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

董事会秘书：李剑鹏先生

FCC WARNING: To assure continued

installation instructions and use only shielded cables when comparing to other devices. Modifications not

When connecting to other devices, Modifications not authorized by the manufacturer may void user's authorit

to operate this device.

The Bluetooth ^® word mark and logos are registered

trademarks owned by Bluetooth SKi, Inc. and any use of such marks by Craig is under license. Other trademarks

and trade names are those of their respective owners."

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

LOCATION OF CONTROLS

1. ECH (Microphone Echo Effect)

2. VOL (Microphone Volume)

Control Knab 5. Micro LED Pod/IFex recharging

1. Micro USB Port (For tech charging and AUX In)

2. AUX Out Jack

3. Microshape

4. Microform

5. Speaker

-

POWER SOURCE:

battery Recharging:

he unit has a built-in Li-ion rechargeable battery, charge it

before first time use or when it is drained as follows: Connect the small plug from the supplied USB Connection

Cable to the Micro USB Port on the unit,

. Connect the full sized USB plug from the supplied USB

Connection Cable to the USB Port on the Personal Computer or USB Charger (Computer and USB Charger

not included) as illustrated below:

自

B

0 1

To Computer or any USB Charger

When charging, the Red Champion indicator on the unit

When charging, the red charging indicator on the unit will illuminate. When finished charging, it will turn off.

OETF:

. When charging, you can play music or sing as usual.

. Your battery will last longer if you following these simple

guidelines for caring and storing. A. Before first time use, charge the unit approximately 4

1. Before first time 3:00, charge this unit approximately 4 hours until the unit is fully charged.

B. Charge and store the unit within the temperature range

of 5°C - 35°C (40°F - 95°F). C. Do not overcharge (longer than 24 hours). Excessive

charging or running the unit until battery fully drains will

damage battery. Battery life will be extended if you keep the battery fully charged

The company, Inc., is also

D. Battery life naturally shortens slowly over time. E. The rechargeable battery incorporated in this product

E. The rechargeable battery incorporated in this product is not user replaceable.

B. BARRIUS RIBBERLY (HEATURIS)

BATTERY DISPOSAL WARNING! To reduce the risk of fire or burns:

Do not disassemble, crush, puncture, or short external

Use only with specified charger and player.

Do not dispose of in fire or water. Do not dispose In high temperature above 60°C (140°F).

Stone between 0°C (32°F) and 60°C (140°F).

A Li-ion Battery Must Be

DisposedOf Property

Keep away from children.

See operating instructions of this battery or product. Batteries should be recycled or disposed of as per State and

Local guidelines.

OPERATION:

ST. ELENTON

BT MODE: For first time use or re-pairing the unit to a new RT Device

For first time use of no-pailing the unit is a new D/F Device, follow instructions below:

1. Press and hold the Ⓧ Button to power on the unit. The

2. Power on the external BT Device and enter to BT

searching mode. Start pairing following the on screen

instructions from the external BT Device. When paired, the Blue Indicator will stop blinking.

1. If pairing is complete you may now play music with your

external BT Device.

• Use the Volume Controls on the paired BT Device to

adjust volume level as desired.

• Using the Pause; Skip Controls on the paired BT Device to pause, skip tracks as desired

• Sing or speak to the Microphone. Then:

A. Slide the VOL (Microphone Volume) Control Knob

on the unit to adjust the volume level of the Microphone as desired.

B. Side the ECH (Microphone Echo Effect) Control

Knob to adjust the echo effect of the Microphone as desired.

Desired. Note: If feedback noise (high audio frequency noise

is sounding from the speaker. Reduce the music

volume level or reduce the microphone volume level by sliding the VOL (Microphone Volume) Control

by adding the core (diamorphs, Valsins) central Knob downward.

1. To shut off the unit, press and hold the Ⓒ Button on the unit until the Plus indicator is turned off.

unit and the Blue Indicator is turned on.

Notes: * When the external RT Device searches for the unit, our

model number 'MMA3650' will appear on the display of

external BT Device.

- If little pairing you are asked for a code please try "0000 or "1234".

2.1.1.1.

Normal operation after paired: 1. Buses on the external RT Device and enter to RT mode

1. Power on the external 3-P device and enter to 3-P mode.
2. Press and hold the ☎ Button on the unit to power on the

unit. The Blue Indicator on the unit will illuminate and blink

1. Wait a few seconds until the unit auto pairs to the extern PT Devices (The Blue indicator will stop blinking).

2. Device: (The Blue Indicator will stop blinking). 4. If pairing is complete you may now play music and/or

singing with your external BT Device.

AUDIO IV:

To listen and sing with the music from the external Audio

Player such like MP3 Player, Discman...etc.

1. In power on mode, connect the 3.5mm stereo plug from the supplied Audio (In) Connection Cable to the AUX

Out/Line Out /Phone Jack on the external Audio Player.

1. Connect the Micro USB Plug from the Connection Cable

to the micro door jack on the unit as illustrated below. The BT Function will be automatically cut off and the Blu

Indicator will start blinking.

B

To AUX Outline Out

Phone Jack on the external Audio Player

■

□

1. Play the music on the connected Player as usual. (Adjust the music level by the Volume Controls on the connected

Audio Player as usual.)

1. Sing or speak to the Microphone. Then:

A. Side the VOL (Microphone Volume) Control Knob on the unit to adjust the volume level of the Microphone a

desired.

B. Slide the ECH (Microphone Echo Effect) Control Knot To adjust the echo effect of the Microphone as desired

to adjust the bond effect of the microphone as booked

AUX OUT: To listen to music and also through the external Audio厅

To listen to music and sing through the external Audio Poll Amplifier:

1. Power on the unit and enter to BT playback mode as

previously instructed.

Cable to the AUX In/Line In Jack on the external Audio

Power Amplifier as illustrated below:

1. Connect the other end of the Connection Cable to the AUX(Out) Jack on the unit as illustrated below. The unit

will automatically switch to AUX (Out) mode. (Note: Sound from the speaker will automatically cut off).

Sound from the speaker will automatically cut off.

To AUX Out/Line Out

Phone Jack on the external Austin Player

■ ■

1. To resume to normal playback mode, unplug the cable

from the AUX (Out) Jack.

BUILT IN USB CHAPCER:

The unit has a built-in USB Charger. Use it to charge the

external USB Device as follows:

1. Make sure the unit is in power on mode.
2. Connect the full size USB Plug from the charging cable

(Not included) from external USB Device to the USB

Port. 2. Champion will auto slot. Monitoring the sharing status:

1. Charging will also start monitoring the charging status by the charging indicators on the external USB Device

as usual.

1. When finished charging, disconnect the external USB Device from the USB Port

□

To charming part of the

external USB Device

|

10

Notes: A. The capacity of the built-in battery is 1200 mH

(4.441WH). Never use it to recharge the external USB

Device their battery is bigger than it.

B. Before charging the external USB Device, check the power of the built-in battery. If the power of the battery

power of the bath in battery, and the power of the battery is too low, it cannot use to charge the external USB

Device. C. The Charger has a built-in overaged/overheats exterior.

If the output of the Charger is overload, the unit will shut

off automatically. To reset the unit:

- Unplug the external USB Device from the USB Port. - Connect the unit to the Computer or USB Charger In

recharge the unit as usual then the unit will be reset.

,

TROUBLESHOOTING:

Check the following before requesting service:

SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION

Can't power on Built-in battery consumed Flecharge the battery as page 2

Values of the unit was set by minimum position. Increase the volumes by the volume controls on the retained

No sound of sound proof

(600) Wack Audio Connection Cable was inserted into the AUX Unplug the Audio Connection Cable from the AUX (Out) Jack

(Dal) Jack

Sound distortion Volume level 100 mg/l Release the volume meter up the volume-controls on the paired connected RT device

The external IVT Device Pair the external IVT Device in

BIT mix 5% operating had NOT paired to the unit the unit as page 3

| 100% (Ewing) | The external IIT device has far from the unit | Place the external IIT device close to the unit

The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a rule line on paper). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a solid line constitutes an error, as it misrepresents the visual element and violates the instruction to ignore stylistic lines. Therefore, the OCR result is inconsistent with the Ground Truth.

SPECIFICATIONS:

Power Source Built-in DC 3.7V, (200 m/s/d) (5 dH/h) rechenable

Li-ion Battery; Recharge by OC min SV through Micro L5591 Port

Impetance of the Speaker 3 IV; 4 slins

Audio Power 1.5 VI (RBMS)

BT Version 6.1

MT Operation Distance ☐ 32 Feet in open area

Out put from the Bull-in Charger DC mm 5V, 1A Max.

1. 2014年1月1日

PACKAGE INCLUDES:

1 x Owner's Manual

1 x Audio (In) Connection Cable with 3.5mm Plugs 1 x Audio (Out) Connection Cable with 3.5mm and Micro

USB Plug

1 x USB Connection Cable with Full size and Micro USB

Hugi

SPECIFICATIONS AND ACCESSORIES ARE SUBJECT

TO CHANGE WITHOUT NOTICE

LIMITED WARRANTY

Craig Electronics Inc. warrants this product to be free from

manufacturing defects in material and workmanship under normal use for a period of 180 days from date of purchase.

If service is required, please return the product to the store

where it was purchased for exchange; or, pack the unit in the original packing material with all accessories if applicable,

a copy of your sales receipt and a Cashier's check or Money Order for \$7 (to cover shipping and handling costs)

payable to Craig Electronics Inc. For consumers in Canada, please make sure that the arching school company orders

please make sure that the cashier check or money order is redeemable through a U.S. bank. Ship your product freight

pre-paid. Your unit will be repaired, replaced or if the unit can not be repaired or replaced, a refund will be forwarded.

to you within four weeks of receipt of your unit. Please ship

your unit is:

Craig Electronics Inc. 1160 MW 183 Drive

Miami, Fl 33169

This warranty is void if the product has been: a) Used in a

commercial application or rental. b) Damaged through misuse, perdence, or abuse. c) Modified or repaired by

anyone other than an authorized Craig Electronics Inc.

service center. d) Damaged because it is improperly connected to any other equipment.

Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Dvner's Manual which can be performed

by the customer. b) Damage to equipment not properly

connected to the product. c) Any cost incurred in shipping the product for repair. d) Damage to the product not used in

the USA.

This warranty is not transferable and only applies to the original number. Any implied voucher, including the

original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the

period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter.

expressed of implied shall apply to the product manufacturer. Under no circumstances shall Canin Finetrugine Inc. its light

under no circumstance shall Craig Electronics Inc. be liable for any loss or consequential damage arising out of the use

of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from

However, you may have other rights which may vary from state to state. Some states do not allow limitations on

impleed warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you.

This product has been manufactured by and in said under

This product has been manufactured by and is sold under the responsibility of Craig Electronics Inc., and Craig Electronics Inc. is the warrantor in solution to this product.

Electronics Inc. is the manager in relation to this product MAGNAVOX and SMART. VERY SMART are registered

trademarks of Koninklijke Philips N.V. and are used under

To Obtain Service on your Product email:[e-mail]

•

Printed in China MMA3650_WC_E0FK1_B0WL

[Non-Text]