FDXS50CVMA - Air Conditioning DAIKIN - Free user manual and instructions
Find the device manual for free FDXS50CVMA DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ducted Air Conditioning Indoor Unit |
| Brand | Daikin |
| Model | FDXS50CVMA |
| Cooling Capacity | 5.0 kW (17,100 BTU/h) |
| Heating Capacity | 5.8 kW (19,800 BTU/h) |
| Power Supply | 230 V / 50 Hz / Single Phase |
| Dimensions (H x W x D) | 250 mm x 1100 mm x 650 mm |
| Weight | 34 kg |
| Refrigerant | R32 |
| Sound Pressure Level (Low/High) | 29 / 37 dB(A) |
| Power Input (Cooling) | 1.35 kW |
| Power Input (Heating) | 1.45 kW |
| EER / COP | 3.70 / 4.00 |
| Compressor Type | Hermetic Swing Inverter |
| Airflow Rate (High) | 780 m³/h |
| Duct Connection Size | 200 mm diameter |
| Operating Temperature Range (Cooling) | -10°C to 46°C |
| Operating Temperature Range (Heating) | -15°C to 24°C |
| Maintenance | Clean or replace air filter every 3 months; check drain pan and duct connections annually. |
| Safety Features | Auto restart, overload protection, refrigerant leak detection, self-diagnosis. |
| Spare Parts / Repairability | Available through authorized Daikin service centers; replaceable fan motor, control board, and sensors. |
| General Information | Inverter technology for energy savings; suitable for concealed ceiling installation; wired/wireless remote control optional. |
Frequently Asked Questions - FDXS50CVMA DAIKIN
What is the recommended maintenance schedule for the FDXS50CVMA?
Clean or replace the air filter every 3 months. Inspect drain pan and duct connections annually. A professional service every 2 years is recommended.
Can the FDXS50CVMA be installed in a bathroom or humid area?
No, the indoor unit should be installed in a dry location free from excessive moisture. It is designed for concealed ceiling installation in living spaces.
What type of remote control does this unit use?
The FDXS50CVMA is compatible with a wired remote controller (BRC series) or an optional wireless remote (ARC series). The manual provides wiring details.
How do I reset the error code on the FDXS50CVMA?
Turn off the unit using the remote, wait 5 minutes, then turn back on. If the error persists, refer to the self-diagnosis code in the manual (e.g., A1 = PCB failure, E5 = overcurrent). Contact a Daikin technician.
Is the FDXS50CVMA compatible with a heat pump or cooling only?
This model is a reverse cycle heat pump, providing both cooling and heating. The capacity is 5.0 kW cooling and 5.8 kW heating.
What refrigerant does the FDXS50CVMA use?
It uses R32 refrigerant, which has low global warming potential (GWP = 675) and is more efficient than R410A.
How do I clean the air filter on the FDXS50CVMA?
Access the filter through the service panel. Remove the filter, vacuum or wash with mild detergent, rinse, dry thoroughly, and reinstall. Ensure no moisture enters the unit.
What are the duct connection requirements?
Use insulated flexible ducts with a minimum diameter of 200 mm. Ensure a straight section of at least 500 mm before the unit's air inlet for proper airflow.
Can I install the FDXS50CVMA myself?
Installation should only be performed by a qualified HVAC technician due to refrigerant handling, electrical connections, and ductwork sizing. Improper installation may cause leaks or reduced performance.
What does the 'MA' suffix in the model mean?
The 'MA' indicates a multi-zone compatibility with Daikin's VRV or SkyAir series. This unit can be paired with a compatible outdoor unit for simultaneous operation.
User questions about FDXS50CVMA DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual FDXS50CVMA - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FDXS50CVMA by DAIKIN.