SG50T12TVT - Water heater GE - Free user manual and instructions
Find the device manual for free SG50T12TVT GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Brand | GE |
| Model | SG50T12TVT |
| Capacity | 50 Gallons |
| Voltage | 240 V |
| Wattage | 4500 W |
| Height | 62.5 inches |
| Diameter | 22.5 inches |
| Weight (Empty) | 145 lbs |
| Energy Factor (EF) | 0.95 |
| Heating Elements | Dual (Upper and Lower) |
| Thermostat | Adjustable, Set point 120°F |
| Anode Rod | Replaceable, Corrosion-resistant |
| Temperature Pressure Relief Valve | Factory installed |
| Warranty | 12 Years (Tank and Parts) |
| Insulation | High-density foam |
| Installation | Indoor, upright on level floor |
| Maintenance | Annual flushing; inspect anode rod |
| Safety Features | Overheat protection, TPR valve |
| Spare Parts | Thermostat, element, anode rod available |
Frequently Asked Questions - SG50T12TVT GE
How do I reset the thermostat on my GE SG50T12TVT water heater?
To reset the thermostat, locate the upper and lower thermostat access panels. Press the red reset button if present. If the heater continues to trip, check for a short circuit or overheating.
What size breaker do I need for a 50-gallon electric water heater?
A 50-gallon electric water heater typically requires a 30-amp double pole breaker for a 4500W element at 240V.
How often should I drain my water heater?
It is recommended to drain your water heater at least once a year to remove sediment buildup and maintain efficiency.
Why is my water heater not producing hot water?
Check the power supply (breaker, wiring), thermostat settings, and heating elements. A tripped limit switch or failed element can cause no hot water.
How do I replace the anode rod in my GE water heater?
Turn off power and water supply, drain a few gallons, remove the old anode rod using a 1-1/16 inch socket wrench, and install a new one with thread seal tape.
What is the life expectancy of a GE electric water heater?
With proper maintenance, a GE electric water heater can last 10-15 years. The 12-year warranty reflects expected durability.
Can I install the SG50T12TVT outdoors?
No, this model is designed for indoor installation only. Install in a dry, heated space to prevent freezing.
How do I adjust the temperature on my water heater?
Remove the thermostat access panel, adjust the dial to desired temperature (typically 120°F for safety and energy savings), and replace the insulation and cover.
What does the 'TPR' valve do?
The Temperature-Pressure Relief Valve (TPR) automatically releases water if temperature or pressure exceeds safe limits, preventing tank explosion.
Where can I find a user manual for the SG50T12TVT?
You can download the free PDF manual from notice-facile.com or the GE website. Search by model number SG50T12TVT.
User questions about SG50T12TVT GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual SG50T12TVT - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SG50T12TVT by GE.