PXHVIS-018 - Uncategorized Ozito - Free user manual and instructions

Product Type	Cordless High Volume Air Inflator
Model	PXHVIS-018
Input Voltage	18V (compatible with Ozito Power X Change batteries)
Power	60W
Max Flow Rate	460 L/min
Weight	0.34 kg
Included Accessories	2 x Inflation Adaptors (concentrator nozzle, narrow nozzle), Lanyard
Battery Compatibility	All Ozito Power X Change batteries and chargers
Functions	Inflation, Deflation, LED Worklight, Lock-on Trigger
Warranty	5 years replacement (60 months) for tool; 36 months for battery/charger
Safety Features	Over-inflation prevention warning, auto shut-off suggestion, ventilation slots
Maintenance	Clean ventilation slots regularly; use only cloth for housing; store in dry, frost-free location
Environmental Care	Do not dispose with household waste; recycle where facilities exist
Spare Parts Availability	Order from Bunnings Special Orders Desk or contact Ozito customer service
Compliance	Regulatory Compliance Mark (RCM)
Intended Use	DIY (Do It Yourself) only
Recommended Continuous Use	Maximum 15 minutes, then cool for 8 minutes
Safety Warnings	Read entire manual; avoid flammable liquids; keep away from children; do not submerge
Inflation Port	Includes locking adaptor with twist mechanism
Deflation Port	Separate port for deflating items

Frequently Asked Questions - PXHVIS-018 Ozito

What batteries are compatible with the Ozito PXHVIS-018 inflator?

The inflator is compatible with all batteries and chargers from the Ozito Power X Change range.

How do I attach the inflation adaptors?

Align the slot on the adaptor with the tab on the inflation port, push it on, then turn anti-clockwise to lock. For removal, twist clockwise and pull off.

Can the inflator be used for deflating items?

Yes, use the deflation port on the tool. Attach the required adaptor and follow the same steps as inflation.

How do I turn the tool on and off?

Press the on/off trigger once to start; the tool locks on automatically. Press again to stop. The LED worklight turns on automatically.

What is the maximum continuous operating time?

Do not use for more than 15 minutes continuously. If exceeded, turn off and let cool for at least 8 minutes before resuming.

What should I do if the inflator overheats?

Ensure the intake fan and vents are not obstructed. If overheating occurs, turn off and allow to cool. Check for blockages and clean if necessary.

What does the warranty cover?

The tool has a 5-year replacement warranty (60 months) for DIY use. Batteries and chargers have 36 months. It does not cover abuse, alterations, or failure to maintain.

How should I clean and store the inflator?

Clean ventilation slots with a dry cloth. Do not use solvents. Store in a dry, frost-free location out of children's reach. Disconnect the battery before storing.

What is the maximum flow rate of the inflator?

The maximum flow rate is 460 L/min at 18V input.

Can I use the inflator for high-pressure items?

This is a high-volume, low-pressure inflator suitable for air mattresses, pool toys, etc. Do not use for high-pressure items like car tires unless specified. Avoid over-inflation.

USER MANUAL PXHVIS-018 Ozito

CORDLESS HIGH VOLUME AIR INFLATOR

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 18V

Power: 60W

Max. Flow Rate: 460L/min

Weight: 0.34kg

ozito.com.au

Line drawing of a handheld electric tool with a strap, shown in line style (no text or symbols)

STANDARD EQUIPMENT

Cordless High Volume Inflator

2 x Inflation Adaptors

5YEAR REPLACEMENT WARRANTY

PXHVIS-018

WARRANTY

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.

The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by contacting our customer service helpline above.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes consumable parts.

KNOW YOUR PRODUCT

CORDLESS HIGH VOLUME AIR INFLATOR

1. Inflation Port
2. Sure Grip Handle
3. LED Worklight
4. Lanyard
5. On/Off Trigger
6. Battery Seating
7. Deflation Port
8. Inflation Adaptors

BATTERY & CHARGER

This tool is compatible with all batteries & chargers from the Ozito Power X Change range.

ONLINE MANUAL

Scan this QR Code with your mobile device to take you to the online manual.

SETUP & PREPARATION

1. FITTING THE BATTERY

Installing The Battery Pack

1. Slide the battery into the tool base until it clicks into place.

Illustration of a mechanical component with a red arrow indicating direction (no text or symbols)

Removing The Battery Pack

1. Hold down the battery release button and then slide the battery out.

OPERATION

2. FITTING THE ADAPTORS 3. CONTROLS

ENSURE THE TOOL IS SWITCHED

OFF AND THE BATTERY IS REMOVED BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

Attaching The Inflation Adaptors

A concentrator nozzle and narrow nozzle adaptor have been provided to suit a variety of inflatables.

1. Align the slot on the adaptor with the tab on the inflation port of the tool.

Technical diagram of a mechanical component with highlighted areas (no text or symbols)

1. Push the adaptor onto the inflation port.

Diagram showing a tool interacting with a mechanical component, no text or symbols present

1. Turn the adaptor anti-clockwise to lock it in place.

Technical line drawing of a mechanical component with a red circular annotation (no text or symbols)

1. The narrow nozzle can then be pushed onto the adaptor if it is required.

Diagram of a mechanical tool with a red arrow indicating direction, no text or symbols present

Removing The Inflation Adaptor

1. Twist the inflation adaptor clockwise to unlock it and then pull it off the tool.

Turning The Tool On/Off

1. Press the on/off trigger once to start the tool.

Note: The tool will automatically lock-on and continue inflating even if you let go of the trigger.

Technical line drawing of a mechanical component with a red arrow indicating direction (no text or symbols)

1. Press the on/off trigger again to stop the tool.

LED Worklight

The worklight automatically lights up when the tool is started to help you see in low light conditions (such as during camping).

Simple line drawing of a curved road with a red circle highlighting a specific area (no text or symbols)

4. INFLATING & DEFLATING ITEMS 5. TROU

WARNING! AVOID INFLATING OBJECTS ABOVE THE RECOMMENDED INFLATION PRESSURE. THIS MAY LEAD TO DAMAGE AND/OR INJURIES.

1. Fit the required inflation adaptor onto the tool.

Technical line drawing of a mechanical component with a red circular annotation (no text or symbols)

1. Insert the nozzle into the valve of the inflatable item.

Diagram of a tool inserted into a component, showing a pointed tip and curved tube (no text or symbols)

1. Switch the inflator on.

Diagram of a vehicle's internal structure with a red arrow pointing to a specific area (no text or symbols present)

1. Once the item is suitably inflated, switch the tool off and remove the adaptor from the valve.

WARNING! ENSURE THE DEFLATION PORT AND AIR VENTS ARE NOT OBSTRUCTED, OTHERWISE THE UNIT COULD OVERHEAT.

1. To deflate objects, fit the required adaptor onto the deflation port and then proceed with steps 2 & 3.

Technical illustration of a handheld device with a nozzle and connector, showing internal components (no text or symbols)

LESHOOTING

Symptom Possible Cause Solution
The inflator does not start	No power supply	Check that the battery is charged.
	On/off switch not in the on position	Push the on/off trigger
Nozzles disconnect when the tool switches on	Loose inflation adaptor	Ensure that the inflation adaptor is locked onto the air port of the tool
Tool is operating but the inflatable item is not inflating	Some inflatable items have a check valve that require pinching or unscrewing	Pinch or unscrew the item's check valve while operating the tool
Tool is overheating	While inflating, the intake fan or vents are being obstructed, restricting air flow to the tool	Ensure the intake fan and vents are free of any obstructions

MAINTENANCE DESCRIPTION OF SY

WARNING! BEFORE CLEANING OR CARRYING OUT ANY MAINTENANCE PROCEDURE, ENSURE THAT THE BATTERIES HAVE BEEN REMOVED.

Cleaning

• Keep the ventilation slots of the tool clean at all times to ensure efficient operation.
• If the housing of the tool requires cleaning, do not use solvents. Use of a cloth only is recommended.
• Never allow any liquid to get inside the tool, never immerse any part of the tool into liquid.

Storage

When not in use, the tool should be stored in a dry, frost free location, keep out of children's reach.

WARNING! DISCONNECT THE BATTERY BEFORE STORING.

Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the tool by an unauthorised person or by mishandling.

IBOLS

V	Volts		psi	Pounds per square inch
L/min	Litres per minute		W	Watts
	Regulatory Compliance Mark (RCM)			Warning
		Read Instruction Manual Do		ulated

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice.

Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice.

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse.

For further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito Customer

Service:

Australia 1800 069 486

New Zealand 0508 069 486

E-mail: [e-mail]

ELECTRICAL SAFETY

WARNING! When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage.

Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool.

Save these instructions and other documents supplied with this tool for future reference.

The charger has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate.

Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.

This tools charger is double insulated; therefore no earth wire is required. Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool.

If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective.

When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.

The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current device reduces the risk of electric shock.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in

the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety
   a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
   b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
   c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety
   a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
   b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
   c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
   d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
   e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
c. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
h. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a

second.

1. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
c. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

5) Battery tool use and care

a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.
g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

6) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service provider.

AIR INFLATOR SAFETY WARNINGS

WARNING! This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

• Do not place the air outlet port against any part of your body when turned on.
• Do not make any alterations to this tool. Only use the adaptors supplied with this product.
• Use this product only in accordance with operation instructions included in this manual.
• If the air inflator is making abnormal sounds or its temperature is quite high, turn off the power straight away and let it cool for at least 10 minutes before trying again. Improper use may result in damage of the tool.

- Do not leave unattended and operating. Keep out of reach of children.

- Put the air inflator in a dry place if it is not in use for an extended period of time.

- Keep the tool away from flammable liquid or gas. Do not allow the tool to become wet.

• Never put the connector and adaptors into your mouth, ear or eye. They are not toys.
• Do not insert hands or objects into the inlets/outlets of the tool while it is connected to power.
• Before using the tool, always inspect it visually. Do not use the tool if it is cracked and/or damaged. If the tool is damaged, contact Ozito customer service.
• Protect the plug and the power cable from heat, oil or sharp edges.
• Do not cover the air inlets on the air inflator.
• Keep air inflator away from flammable liquid or gas.
• Do not allow air inflator to be submerged or become wet.
• Ensure that the air inflator is disconnected from the power source before performing any work or maintenance on the tool.
• It is not suggested that the air inflator work continuously for more than 15 minutes. If 15 minutes of use has been reached, turn it off and let it cool for 8 minutes before using again.
• Do not over-inflate objects. Over-inflation can cause damage and/or personal injury.