KI90XT - Range hood SMEG - Free user manual and instructions
Find the device manual for free KI90XT SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Smeg |
| Model | KI90XT |
| Width | 90 cm |
| Depth | 50 cm |
| Height (Minimum-Maximum) | 62 - 112 cm |
| Weight | 15 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 240 W |
| Maximum Extraction Rate | 650 m³/h |
| Noise Level (Max) | 65 dB(A) |
| Number of Speeds | 3 |
| Controls | Electronic push buttons |
| Filter Type | Grease filter (aluminum) + carbon filter (optional) |
| Lighting | 2 x 40 W halogen bulbs (G4) |
| Installation Type | Wall-mounted, ducted or recirculating |
| Energy Class | A+ |
| Annual Energy Consumption | 42 kWh |
| Grease Filter Cleaning | Every 2 months (dishwasher safe) |
| Carbon Filter Replacement | Every 6 months |
| Bulb Replacement | G4 halogen, max 40 W |
Frequently Asked Questions - KI90XT SMEG
How to install the Smeg KI90XT range hood?
Ensure the hood is mounted at least 65 cm above the hob. Use the provided template to mark the wall, drill holes, and secure the mounting bracket. Connect the duct or activate recirculation mode if using carbon filters. Finally, hang the hood and connect to the electrical supply.
How to clean the grease filters?
The aluminum grease filters can be cleaned in the dishwasher or by hand with warm soapy water. Dry thoroughly before reinstalling. For optimal performance, clean every 2 months.
When to replace the carbon filter?
If the hood is used in recirculation mode, replace the carbon filter every 6 months or more often if cooking heavily. The filter cannot be washed.
What is the maximum extraction rate?
The Smeg KI90XT has a maximum extraction rate of 650 m³/h, suitable for kitchens up to 20 m².
How to change the light bulbs?
Disconnect the hood from power. Remove the bulb cover using a screwdriver, replace with a G4 halogen bulb (max 40 W), and reattach the cover. Handle bulbs with a cloth to avoid oil residue.
Can the hood be used without a duct?
Yes, the KI90XT can be used in recirculation mode by installing optional carbon filters. The air is purified and returned to the kitchen.
What is the noise level?
Noise level varies by speed: approximately 55 dB(A) at normal speed and 65 dB(A) at maximum speed.
How to reset the filter alarm?
After cleaning or replacing filters, press and hold the timer button (if equipped) for 3 seconds until the indicator light turns off.
What are the dimensions?
Width: 90 cm, Depth: 50 cm, Height: adjustable from 62 to 112 cm.
Where to find spare parts?
Spare parts such as filters, bulbs, and motors can be ordered from authorized Smeg dealers or the official Smeg website using the model number KI90XT.
User questions about KI90XT SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual KI90XT - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KI90XT by SMEG.