EAX14 - Powerline Adapter NETGEAR - Free user manual and instructions
Find the device manual for free EAX14 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Powerline Adapter (Single) |
| Model | EAX14 |
| Brand | NETGEAR |
| Data Transfer Rate | Up to 2000 Mbps |
| Ethernet Ports | 1 x Gigabit Ethernet |
| Pass-through Socket | Yes, with noise filter |
| Security | 128-bit AES encryption |
| Power Consumption | Max 4.5W (typical 3.5W) |
| Dimensions (H x W x D) | 127 x 69 x 37 mm |
| Weight | 210 g |
| Input Power | 100-240V AC, 50/60 Hz |
| Operating Temperature | 0°C to 40°C |
| Package Contents | 1 x Powerline adapter, 1 x Ethernet cable, Quick start guide |
| Compatibility | All NETGEAR Powerline models, HomePlug AV2/AV standard |
| Setup | Plug and play, no configuration required |
| LED Indicators | Power, Ethernet, Powerline connection |
| Cleaning | Wipe with dry cloth, do not use liquids |
| Safety | Keep away from water, do not disassemble |
| Repairability | No user-serviceable parts; contact support |
| Warranty | 2 years limited |
Frequently Asked Questions - EAX14 NETGEAR
How do I set up my NETGEAR EAX14 powerline adapter?
Plug the adapter directly into a wall outlet (not a power strip). Connect it to your router using the included Ethernet cable. Press the Security button on each adapter to pair them. The Powerline LED should turn solid green.
Why is my powerline adapter not connecting to the internet?
Check that both adapters are plugged into wall outlets and the Ethernet cables are securely connected. Ensure the Powerline LED is solid or blinking. If not, press the Security button on both adapters to pair them. Also verify your router's internet connection.
What is the maximum speed of the EAX14?
The EAX14 supports up to 2000 Mbps over your home's electrical wiring. Actual speed depends on wiring quality and distance.
Can I use the EAX14 with other brands of powerline adapters?
It is compatible with all HomePlug AV2/AV adapters. However, for best performance, NETGEAR recommends using adapters from the same family.
Does the EAX14 have a pass-through socket?
Yes, the EAX14 has a built-in pass-through socket with noise filter, allowing you to plug another device into the same wall outlet.
How do I reset my NETGEAR powerline adapter to factory defaults?
Locate the pinhole Reset button on the side. Insert a paperclip and press for about 10 seconds until all LEDs blink. Release and the adapter will reboot.
What do the LED lights on the EAX14 indicate?
The Power LED shows the adapter is on. The Ethernet LED indicates a wired connection. The Powerline LED shows the connection between adapters: solid green is good, blinking is pairing, off means no connection.
Can I use the EAX14 with a power strip or surge protector?
It is not recommended. Plug the adapter directly into a wall outlet to avoid signal loss and interference. Surge protectors can degrade performance.
Is the data transmitted over powerlines secure?
Yes, the EAX14 uses 128-bit AES encryption to secure your data between adapters. The Security button generates a unique encryption key.
How many powerline adapters can I use on the same network?
You can use up to 16 adapters in a single powerline network. Each adapter must be paired using the Security button.
User questions about EAX14 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Powerline Adapter in PDF format for free! Find your manual EAX14 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EAX14 by NETGEAR.