Intensifier OID4 - Security Camera Speco Technologies - Free user manual and instructions
Find the device manual for free Intensifier OID4 Speco Technologies in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Speco Technologies |
| Model | Intensifier OID4 |
| Resolution | 1920 x 1080 (Full HD) |
| Lens | 3.6mm fixed lens |
| Night Vision | IR LEDs up to 30m (98ft) |
| Field of View | 80° |
| Power | 12V DC or PoE (IEEE 802.3af) |
| Dimensions (W x H x D) | 70 x 60 x 120 mm (2.76 x 2.36 x 4.72 in) |
| Weight | 0.4 kg (0.88 lb) |
| Weatherproof Rating | IP67 |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Video Compression | H.264 |
| Frame Rate | 30 fps |
| Storage | MicroSD card up to 128GB |
| Connectivity | RJ45 Ethernet, Wi-Fi optional |
| Motion Detection | Yes (configurable zones) |
| Audio | Built-in microphone |
| Warranty | 2 years |
| Mounting | Wall or ceiling mount included |
| Certifications | CE, FCC |
Frequently Asked Questions - Intensifier OID4 Speco Technologies
How do I reset the Intensifier OID4 to factory defaults?
To reset the camera, press and hold the reset button on the back of the camera for 10 seconds using a paperclip. The camera will reboot and restore factory settings.
What is the maximum resolution supported by this camera?
The camera supports 1920 x 1080 pixels (Full HD) at 30 fps. It also supports lower resolutions like 1280 x 720 and 640 x 480.
How do I connect the camera to my Wi-Fi network?
First, connect the camera via Ethernet and access its web interface. Go to Wireless Settings, scan for your Wi-Fi network, enter the password, and apply. You can then disconnect the Ethernet cable.
What type of power adapter does the Intensifier OID4 require?
The camera can be powered via 12V DC (adapter included) or Power over Ethernet (PoE) using a PoE switch or injector that complies with IEEE 802.3af.
How do I view the camera feed on my smartphone?
Download the Speco Viewer app from the App Store (iOS) or Google Play (Android). Add the camera by scanning its QR code or entering the serial number and password.
Does the camera support night vision?
Yes, it has infrared LEDs that provide clear black-and-white images up to 30 meters (98 feet) in complete darkness.
Can I use a MicroSD card for local recording?
Yes, insert a MicroSD card (up to 128GB, Class 10 or higher) into the slot. You can configure continuous or motion-triggered recording in the camera settings.
The camera is not connecting to the network. What should I check?
Ensure the Ethernet cable is properly connected and the router has DHCP enabled. Try a different cable or port. If using PoE, verify the switch provides power. Reset the camera if needed.
How do I clean and maintain the camera?
Use a soft, dry cloth to clean the outer surface. Avoid abrasive cleaners. Ensure the lens is free of dust. Periodically check that the mount is secure.
Is the camera weatherproof for outdoor use?
Yes, the camera has an IP67 rating, meaning it is dust-tight and can withstand immersion in water up to 1 meter for 30 minutes. Suitable for outdoor installation.
User questions about Intensifier OID4 Speco Technologies
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual Intensifier OID4 - Speco Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Intensifier OID4 by Speco Technologies.