iBT61 - Loudspeaker IHOME - Free user manual and instructions

Product Type	Bluetooth Rechargeable Mini Speaker
Brand	iHome
Model	iBT61
Connectivity	Bluetooth
Bluetooth Pairing	Press and hold Pairing Button for 2 seconds
Speakerphone	Built-in microphone for hands-free calls
Power Source	Internal rechargeable lithium-ion battery
Charging	Micro-USB (cable included), connect to USB port
Charging Indicator	Solid red while charging, off when fully charged
Low Battery Indicator	Flashing red LED
Controls	On/Off switch, Play/Pause/Pairing button, Answer/End Call button
Audio Streaming	From Bluetooth-enabled devices
Call Functions	Answer, end, and reject calls via button
Locking Mechanism	Twist to compress and lock, twist to expand
Maintenance	Clean with soft cloth and mild soap; clean rubber pad with damp cloth
Safety	Do not expose to water, excessive heat, or disassemble
Warranty	1 year limited warranty
FCC ID	EMOIBT61
IC	986B-IBT61
Compliance	FCC Part 15, Industry Canada RSS
Country of Origin	China

Frequently Asked Questions - iBT61 IHOME

How do I pair my iHome iBT61 with a Bluetooth device?

Slide the On/Off switch to ON. Press and hold the Bluetooth Pairing Button for 2 seconds until the LED flashes blue and red. On your device, enable Bluetooth and select "iHome iBT72Y" (note: model may appear as iBT72Y, but it is the same unit). If prompted for a passcode, enter 1234. When paired, the LED glows solid blue and a tone sounds.

How do I charge the iBT61 and how long does it take?

Connect the included micro-USB cable to the speaker and the larger USB end to a powered USB port (e.g., on a computer connected to a wall outlet). The LED turns red while charging and turns off when fully charged. Charging time is not specified, but typically takes 2-3 hours.

Can I use the iBT61 for phone calls?

Yes, the iBT61 has speakerphone mode. When a call comes in, press the Answer/End Call button to answer. Press again to end. Music playback pauses during calls and resumes after.

What should I do if the speaker produces no sound or distorted audio?

First, ensure the speaker is charged. If the LED flashes red, recharge the battery. Also check that the speaker is paired and within range (about 33 ft). Adjust volume on your device. If distortion occurs at high volume, reduce volume or recharge.

How do I clean and maintain the iBT61?

Use a soft cloth moistened with mild soap and water to clean the unit. Clean the rubber pad on the bottom with a damp cloth for best performance. Avoid abrasive cleaners or thinners.

Is the battery replaceable?

No, the lithium-ion battery is internal and not user-replaceable. Attempting to replace it may damage the device and void the warranty. If the battery fails, contact Customer Service at 1-800-288-2792.

What is the warranty coverage for the iBT61?

The iBT61 comes with a 1-year limited warranty from the date of original purchase against defects in workmanship and materials. To obtain service, call 1-800-288-2792 for a Return Authorization Number. The warranty does not cover damage from misuse, unauthorized repairs, or shipping costs.

What safety precautions should I follow?

Do not use the speaker near water or in wet areas. Keep away from heat sources like radiators or stoves. Do not disassemble the unit or attempt to remove the battery. Use only the specified power supply. Avoid overloading wall sockets.

How does the locking mechanism work?

To compress and lock the speaker, gently press down from the top and twist clockwise. To unlock and expand, grip the top and bottom and twist counter-clockwise. The built-in spring automatically expands the speaker to its proper position. Do not pull hard.

What are the FCC and IC compliance statements?

This device complies with FCC Part 15 and Industry Canada RSS. It may not cause harmful interference and must accept any interference received. The FCC ID is EMOIBT61 and IC is 986B-IBT61. Changes not approved by the responsible party could void the user's authority to operate the equipment.

USER MANUAL iBT61 IHOME

- Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see which ones in your area do so.

CAUTION

The battery used in this device may present a risk of fire, explosion or chemical burn if misreleased. Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.

- Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance.

- Always confirm that the temperature is 5^ - 35^ (41° - 95° Fahrenheit) before you charge the battery. Leakage or deterioration of the battery may occur if this warning is not heeded.

- Never expose the battery to any liquid.

- Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an unventilated vehicle where excessive internal temperatures may be encountered.

• Always keep the battery cut of the reach of infants and small children.

Maintenance

- Place the unit on a level surface away from sources of direct sunlight or excessive heat.

- Protect your furniture when placing your unit on a natural wood and acquired finish. A cloth or other protective material should be placed between it and the furniture.

- Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents such as thinner or similar materials can damage the surface of the unit.

Limited 1 Year Warranty Information

Home Products, a division of SOI Technologies Inc. (thereafter referred to as SOI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (*) year from the date of original purchase.

Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair on, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service.

If service is required, please call Customer Service at 1-850-288-2792 to obtain a Return Authorization Number and shipping instructions.

Disclaimer of Warranty

NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover it products which have been damaged by negligence or vital actions, misuse or accident, or which have been modified or repaired by unauthorized persons; fill cracked or broken cabinets, or units damaged by excessive heat; fill damage to digital media players, CD's or tape cassettes (if applicable); (w) the cost of shipping this product to the Factory Service Center and its return to the owner.

This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SOI or any of its affiliates, contractors, retailers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary, or punitive damages. (Some status do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Your acknowledgement and agreement to fully and completely abide by the above ment oned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SUI product.

© 2016 SDI Technologies, Inc. AI rights reserved

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

6781-191005-4

Divided by China

A Consumer Guide to Product Safety

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.

1. Water and Moisture - The unit should not be used near water. For example: near a bench Tub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

2. Ventilation - The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.

3. Heat - The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances including amplifiers that produce heat.

4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as worked on the spine.

5. Power-Cable Protection - Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket.

6. Cleaning - The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions.

7. Objects and Liquid Entry – Cars should be taken so that objects do not fall and liquids are not skilled into any openings or vents located on the

product

1. Attachments - Do not use attachments not recommended by the product manufacturer.
2. Lightning and Power Surge Protection - Under the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unintended and unused for long periods of time. This will prevent damage to the product due to lightning and power line surges.

3. Overloading - Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

4. Damage Requiring Service – The unit should be serviced by qualified service personnel when: A line prayer supply ratio or plug line been demanded.

B. chiects have fallen into or liquid has been spilled into the enclosure.

C. the unit has been exposed to rain.

D. the unit has been dropped or the enclosure damaged.

E. the unit exhibits a marked change in performance or does not operate normally.

1. Periods of Nonuse - If the unit is to be left unused for an extended period of time, such as a

2. Servicing - The user should not attempt to service the unit beyond those methods described in the user's operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.

Lithium-ion Battery

Internal Rechargeable Lithium-ion Battery

This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact Customer Service at 1-800-288-2792

WARNING/DISPOSAL OF UNIT

Please do NOT attempt to change the battery yourself. Doing so on damage your device and will void your warranty.

- Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.

- Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal, please dispose of the device in a waste bin for electronic devices.

FCC ID: EMOIBT61

IC: 986B-IBT61

FCC Information

FCC Radiation Exposure Statement

This equipment complex with FOG-RF radiation exposure implies net forth for an uncontrolled environment.

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

- Warning: Changes or modifications to this unit, not expressly approved by the party

RECRISTOR FOR COMPLIANCE COULD VIND THE CEE'S SUSTINLY TO OPERSIZE THE EQUIPMENT. NOTE: This equipment has been tested and found to comply with the limbs for a Class B digital device pursuant to Part. 15 of the FCC Rules.

These limits are designed to prevent reasonable protection on against harmful interference in a residential installation. This equipment generates, uses and can regulate radio frequency energy etc., I not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oil and on, the use is encouraged to try to correct the interference by one or more of the following measures: - Electric or optional the operating entrance.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

• Consult the dealer or an experienced radio/Ti technician for help.

CAN ICES-3 (B)/NMB-3(B)

Canada Statement

This device compiles with Industry Canada's license-exempt RSEs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation at the device.

Head before proceeding

If you have any question regarding the operation or use of this product, please visit www.ihome.com to view answers to frequently asked questions.

To learn more about this and other iHome products, please visit us online at www.ihome.com

graph TD
    A["Bluetooth Mode"] --> B["Switch Speaker ON"]
    B --> C["Press and hold to pair Press to play and pause audio"]
    C --> D["Speaker front view"]
    D --> E["Microphone LED"]
    E --> F["Speaker back view"]
    F --> G["USB Charging Jack"]
    G --> H["Speaker back view"]
    H --> I["End/Answer Call/Play/Pause/Bluetooth Pairing Button"]
    I --> J["Off/On Switch"]
    K["Speakerphone Mode"] --> L["Press to answer and end calls"]
    L --> M["Rubber Pad Note: Clean rubber pad on bottom of speaker with damp cloth for best performance"]
    N["Charging cable"] --> O["Computer connected to working outlet"]
    O --> P["Charging the iBT61 CHARGE BEFORE USE charging cable included"]
    P --> Q["Computer USB port"]
    Q --> R["USB AC adaptor (not included)"]
    R --> S["USB AC adaptor connected to working outlet"]

Locking and Unlocking the iBT61

To compress and lock speaker, gently press speaker down from the top and twist clockwise to lock in place.

To unlock and expand the speaker, grip the top and bottom and give a small twist counter-clockwise. DO NOT pull hard once open, as the built in spring will automatically extend the speaker to its proper position.

Charging the iBT61

The iBT61 is powered by a rechargeable battery in the speaker. Make sure to charge speaker before use.

- Connect the micro-USB plug on the included charging cable to the USB Charging jack on the speaker.

- Connect the larger USB plug to a powered USB port, such as that on a computer. Your computer should be connected to a wall outlet when speaker is charging. The light on the speaker will turn to solid red while charging and turn off when fully charged.

- If the LED flashes red, or you notice sound distortion at higher volumes, or there is no sound at all it's time to recharge the battery.

Using Bluetooth with the iBT61

• Slide the Off/On Switch on the speaker to the on position.
• Press and hold the Bluetooth Pairing Button for 2 seconds. The LED will flash blue and red, a tone will sound as the speaker attempts to pair with a Bluetooth device.
• Place your audio device in Bluetooth mode (often found in the device's Settings or Tools menu) and make it "discoverable". "iHome iBT72Y" should appear on your device's Bluetooth menu. Select it to connect. If your device asks for a passcode, enter '1234'.
• Once paired, the light will glow solid blue and a confirmation tone will sound. You can then stream audio to the speaker. If pairing is not successful, turn the power off on the speaker and repeat pairing procedure.
• To listen to Bluetooth audio, make sure the Ⓐ Switch on the speaker is in on position. Press the Play/Pause Button to cycle between play and pause modes.
  • Control audio volume and track navigation from your device.
  Remember to turn off the speaker and your device after listening.

NOTE: When unit is charging, the blue light will appear solid red.

Using the iBT61 Speakerphone Mode

The speaker must be on and connected to a paired Bluetooth phone to receive calls. When a call comes in, any playing audio is paused, the LED will flash blue 2X and the ringtone associated with the caller may sound, depending on Bluetooth device.

- Press the End/Answer Call Button to answer the call. Press again to end the call.