Elite VSX-91TXH - Receiver PIONEER - Free user manual and instructions
Find the device manual for free Elite VSX-91TXH PIONEER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Receiver |
| Brand | Pioneer |
| Model | Elite VSX-91TXH |
| Channels | 7.1 |
| Power Output | 110 W per channel (8 ohms, 20 Hz-20 kHz, 0.08% THD) |
| Dimensions (W x H x D) | 420 x 186 x 430 mm |
| Weight | 16.8 kg |
| Power Consumption | 540 W (standby: 0.5 W) |
| Audio Inputs | 4 HDMI, 4 digital optical, 2 digital coaxial, 7 analog stereo |
| Video Inputs | 4 HDMI, 3 component, 5 composite |
| Audio Outputs | 1 HDMI, 2 analog zone 2, 1 subwoofer pre-out |
| Video Outputs | 1 HDMI, 1 component, 1 composite |
| Supported Audio Formats | Dolby TrueHD, DTS-HD Master Audio, Dolby Pro Logic IIz |
| Video Upscaling | Up to 1080p via Faroudja DCDi |
| Network Features | Ethernet, DLNA, internet radio (vTuner) |
| Bluetooth | None (optional adapter) |
| USB Input | 1 (front, for iPod/iPhone/USB memory) |
| MCACC Auto Calibration | Yes, with included microphone |
| Speaker Impedance | 6-16 ohms |
| Operating Temperature | 5°C to 35°C |
| Accessories Included | Remote control, MCACC mic, AM/FM antenna, power cord |
Frequently Asked Questions - Elite VSX-91TXH PIONEER
How do I reset the Pioneer Elite VSX-91TXH to factory defaults?
To reset, press and hold the STANDBY/ON button on the front panel for about 5 seconds while the unit is in standby. The display will show 'RESET'. Release the button, then press STANDBY/ON again. This will restore all settings to factory defaults.
How do I connect speakers to the VSX-91TXH?
Use speaker wires with banana plugs or bare wire. Connect the positive terminal of each speaker to the corresponding color-coded binding post (red for positive, black for negative). Ensure the impedance is 6-16 ohms. Refer to the manual for proper channel assignment.
Why is there no sound from my subwoofer?
Check that the subwoofer is powered on and the cable is connected to the SUBWOOFER PRE OUT jack. In the receiver menu, ensure speakers are set to 'Small' and subwoofer to 'Yes'. Also verify the subwoofer volume and crossover settings (recommended: 80 Hz).
How do I update the firmware on the VSX-91TXH?
Connect the receiver to the internet via Ethernet. Go to Home Menu > Setup > System Setup > Update. The receiver will check for updates automatically. Follow on-screen instructions. Do not power off during update.
Can I control the VSX-91TXH with my smartphone?
Yes, using the Pioneer Remote App (available for iOS and Android). Ensure the receiver is connected to the same Wi-Fi network via an Ethernet cable (no built-in Wi-Fi). The app allows basic control and source switching.
What HDMI version does the VSX-91TXH support?
It supports HDMI 1.3a, which carries 1080p video and high-resolution audio formats like Dolby TrueHD and DTS-HD Master Audio. It does not support 4K or 3D passthrough.
How do I run the MCACC auto calibration?
Connect the supplied microphone to the MCACC SETUP MIC jack on the front panel. Place the microphone at ear level in the listening position. Go to Home Menu > MCACC > Auto MCACC. Follow the on-screen instructions. The receiver will measure speaker distances, levels, and room acoustics.
Why does my receiver shut off unexpectedly?
This is usually due to a protection circuit activation. Causes include speaker impedance below 6 ohms, shorted speaker wires, inadequate ventilation (ensure at least 10 cm clearance), or overheating from prolonged high volume. Turn off, disconnect speakers, and cool down before troubleshooting.
How do I connect an iPod or iPhone to the VSX-91TXH?
Use the USB cable provided with your iPod/iPhone (or an optional Pioneer iPod dock). Connect to the USB port on the front panel. The receiver will recognize the device and allow playback via the remote. You can also control from the iPod itself.
What is the standby power consumption?
In standby mode, the receiver consumes less than 0.5 W when the 'Power Save' mode is enabled. This can be set in the Setup Menu to reduce energy usage when not in use.
User questions about Elite VSX-91TXH PIONEER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Elite VSX-91TXH - PIONEER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Elite VSX-91TXH by PIONEER.