Guardian 20KW - Generator Generac - Free user manual and instructions
Find the device manual for free Guardian 20KW Generac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Standby Generator |
| Brand | Generac |
| Model | Guardian 20kW |
| Power Output | 20,000 watts (20 kW) |
| Fuel Type | Natural Gas or Liquid Propane (LP) |
| Engine | Generac G-Force 999cc OHV V-Twin |
| Dimensions (L x W x H) | 48 x 25 x 29 inches (approx.) |
| Weight | 350 lbs (approx.) |
| Noise Level | 66 dBA at 23 ft |
| Transfer Switch | Automatic (included) |
| Starting System | Electric start with battery |
| Voltage | 120/240V single-phase |
| Run Time | Up to 8 hours at 50% load (natural gas) |
| Warranty | 5-year limited warranty |
| Fuel Consumption | Natural gas: 137 ft³/hr at 50% load; LP: 3.5 gal/hr at 50% load |
| Oil Capacity | 2.0 quarts |
| Installation | Professional installation recommended |
| Safety Features | Low oil pressure shutdown, high temperature shutdown, overload protection |
| Control Panel | Digital display with diagnostics |
| Maintenance | Oil change every 100 hours, air filter every 200 hours, spark plugs every 2 years |
Frequently Asked Questions - Guardian 20KW Generac
What type of fuel does the Generac Guardian 20kW use?
The generator runs on natural gas or liquid propane (LP). It is dual-fuel capable.
How much power does the Guardian 20kW produce?
It produces 20,000 watts (20 kW) of standby power, sufficient to power a typical home during outages.
Does the generator come with a transfer switch?
Yes, it includes an automatic transfer switch that seamlessly transitions power when utility power fails.
How often should I change the oil?
Change the oil every 100 hours of operation or annually, whichever comes first. Use SAE 10W-30 oil.
What is the noise level of this generator?
The noise level is approximately 66 dBA at 23 feet, which is quieter than many comparable models.
How do I start the generator?
It features electric start via a battery. The control panel includes a start button and automatic startup during power outages.
Can I install the generator myself?
Professional installation by a licensed electrician is strongly recommended to ensure safety and compliance with local codes.
What size breaker do I need for the Guardian 20kW?
The generator requires a 100-amp main breaker on the transfer switch for typical residential setups.
How do I clean the air filter?
Clean or replace the air filter every 200 hours. Use a mild detergent and water, then dry thoroughly before reinstalling.
What should I do if the generator fails to start?
Check the battery charge, fuel supply, and oil level. Refer to the manual for diagnostic codes on the control panel.
User questions about Guardian 20KW Generac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Generator in PDF format for free! Find your manual Guardian 20KW - Generac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Guardian 20KW by Generac.