9002-8847 - Rear Camera Brandmotion - Free user manual and instructions
Find the device manual for free 9002-8847 Brandmotion in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rear View Backup Camera |
| Brand | Brandmotion |
| Model | 9002-8847 |
| Dimensions (Camera Head) | Approx. 1.25 x 1.25 x 1.5 inches |
| Weight | Approx. 0.2 lbs (camera only) |
| Power Supply | 12V DC (vehicle electrical system) |
| Video Output | RCA composite video (NTSC) |
| Resolution | 720 x 480 pixels (typical) |
| Viewing Angle | 170° diagonal |
| Night Vision | Yes, built-in IR LEDs for low light |
| Waterproof Rating | IP67 (weatherproof) |
| Mounting | Flush mount or bracket mount included |
| Wiring Length | Approx. 23 ft (7 m) cable |
| Compatibility | Aftermarket monitors and OEM radios with RCA input |
| Installation | Requires basic wiring; optional adapter harness may be needed |
| Maintenance | Clean lens with soft cloth; check connections periodically |
| Safety | Use only with proper voltage; avoid exposing wiring to sharp edges |
| Spare Parts & Repairability | Replacement camera and cable available; not user-serviceable internally |
| Certifications | FCC, RoHS |
Frequently Asked Questions - 9002-8847 Brandmotion
How do I install the Brandmotion 9002-8847 rear camera?
Install the camera by mounting it on the rear of the vehicle, routing the video cable to the front, and connecting the power (12V) and video to a compatible monitor or head unit. Use the included harness and follow the manual for wire colors.
Is the camera compatible with my factory radio?
It depends on your radio. The camera outputs RCA composite video, so it works with aftermarket monitors and some factory radios that have a video input. You may need an adapter (sold separately) for vehicles with integrated displays.
Does the camera have night vision?
Yes, the camera features built-in infrared LEDs for clear visibility in low-light or nighttime conditions. The view remains usable even in near darkness.
What is the viewing angle of the camera?
The camera has a 170° diagonal viewing angle, providing a wide field of view behind the vehicle to reduce blind spots.
Is the camera waterproof?
Yes, the camera is rated IP67, meaning it is fully protected against dust and can be submerged in up to 1 meter of water for 30 minutes. It is suitable for external mounting.
What is the resolution of the camera?
The camera provides standard NTSC resolution of 720x480 pixels, which is typical for analog backup cameras. The image is clear enough for safe reversing.
How long is the included cable?
The camera comes with approximately 23 feet (7 meters) of cable, which is sufficient for most SUVs, trucks, and vans. Extension cables are available for longer vehicles.
Can I use this camera with a wireless transmitter?
The camera is wired only, but you can add a wireless transmitter kit (sold separately) to convert the wired signal to wireless. However, direct wired connection is recommended for reliability.
What should I do if the camera image is flickering or not showing?
Check all connections: ensure the power wire is connected to a 12V source (usually reverse light positive), ground is secure, and the RCA cable is firmly plugged. Verify the monitor is set to the correct input.
Does the camera include mounting hardware?
Yes, the package includes a flush mount grommet, bracket, screws, and installation instructions. Some vehicles may require additional adapters for a perfect fit.
User questions about 9002-8847 Brandmotion
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Rear Camera in PDF format for free! Find your manual 9002-8847 - Brandmotion and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9002-8847 by Brandmotion.