CK-35 - Sewing machine BROTHER - Free user manual and instructions
Find the device manual for free CK-35 BROTHER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Brother |
| Model | CK-35 |
| Product Type | Sewing machine |
| Dimensions (approx.) | 40 x 20 x 30 cm (15.7 x 7.9 x 11.8 in) |
| Weight (approx.) | 6.5 kg (14.3 lbs) |
| Power Supply | 120 V ~ 60 Hz (US) or 230 V ~ 50 Hz (EU) |
| Power Consumption | 60 W |
| Lighting | LED bulb |
| Number of Stitches | 15 |
| Buttonhole Type | 4-step automatic |
| Needle Threader | Built-in automatic |
| Bobbin Winding | Horizontal, quick-set drop-in bobbin |
| Stitch Width/Length | Adjustable (max 5 mm width, 4 mm length) |
| Presser Foot Pressure | Adjustable |
| Feed Dog | Drop feed (can be lowered for darning) |
| Free Arm | Yes, for sewing cuffs and sleeves |
| Accessories Included | Presser feet (zigzag, zipper, buttonhole, etc.), bobbins, needles, seam ripper, lint brush |
| Maintenance | Clean bobbin area regularly; oil as per manual; use only Brother recommended oil |
| Safety Precautions | Unplug before cleaning; keep away from water; use only specified power source |
| Spare Parts Availability | Common parts (needles, bobbins, belts) widely available; contact Brother support for others |
| Manual Formats | PDF download (104 pages) available online |
Frequently Asked Questions - CK-35 BROTHER
How do I thread the Brother CK-35 sewing machine?
Follow the numbered threading path on the machine: from the spool, through the top tension disc, down to the take-up lever, then through the needle eye. Use the automatic needle threader for easier threading.
How do I change the needle?
Turn off the machine. Loosen the needle clamp screw, remove the old needle, insert a new needle with the flat side facing back, and tighten the screw securely. Use the correct needle type for your fabric.
How do I wind the bobbin?
Place thread on spool, pass through bobbin winding tension disc, wind thread around bobbin a few times, push bobbin winder to the right, and start sewing slowly. The machine stops automatically when full.
How do I adjust the thread tension?
For top tension, turn the tension dial (higher number = tighter). For bobbin tension, adjust the small screw on the bobbin case. Test on a scrap fabric to achieve balanced stitches.
Why is my machine skipping stitches?
Possible causes: dull or bent needle, incorrect needle type, improper threading, or tension issues. Replace the needle and re-thread. Ensure the needle is fully inserted and tight.
How do I clean and oil the machine?
Unplug the machine. Remove the throat plate and bobbin case. Use the lint brush to clean dust. Apply one drop of sewing machine oil to the specified points (see manual) and run the machine on paper to absorb excess.
What should I do if the needle breaks?
Turn off the machine and remove needle fragments. Check for burrs or damage. Use a new needle of the correct size. Ensure the needle is not bent and the fabric is not too thick.
Can I sew denim with the CK-35?
Yes, but use a denim needle (size 90/14 or 100/16) and slower speed. You may need to adjust presser foot pressure and tension.
How do I make a buttonhole?
Attach the buttonhole foot, set the stitch selector to buttonhole symbol, and place the button in the holder. The machine will sew four steps automatically. Do not force the fabric.
Where can I find spare parts?
Authorized Brother dealers, online stores (Amazon, eBay), or Brother's official website. Use genuine Brother parts to ensure compatibility and performance.
User questions about CK-35 BROTHER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual CK-35 - BROTHER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CK-35 by BROTHER.