QT03624GNAX - Generator Generac - Free user manual and instructions
Find the device manual for free QT03624GNAX Generac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Generator |
| Brand | Generac |
| Model | QT03624GNAX |
| Power Output (Rated) | 36 kW (45 kVA) |
| Fuel Type | Natural Gas / Liquid Propane |
| Engine | Generac OHVI V-Twin, 999 cc |
| Voltage | 240/120V Single Phase |
| Dimensions (L x W x H) | 48 x 30 x 30 in (122 x 76 x 76 cm) |
| Weight | 470 lbs (213 kg) |
| Noise Level | 67 dB(A) at 23 ft |
| Cooling System | Air Cooled |
| Starting System | Electric Start with Battery |
| Control Panel | Digital Controller with LCD Display |
| Transfer Switch | Automatic (sold separately) |
| Fuel Consumption (Natural Gas) | 396 ft³/hr at full load |
| Fuel Consumption (LP) | 3.2 gal/hr at full load |
| Warranty | 5-Year Limited |
| Maintenance Interval | Oil change every 100 hours; air filter every 200 hours |
| Safety Features | Low oil shutdown, over-temperature shutdown, over-crank protection |
| Certifications | UL 2200, CSA, EPA |
Frequently Asked Questions - QT03624GNAX Generac
What is the power output of the Generac QT03624GNAX?
The Generac QT03624GNAX has a rated power output of 36 kW (45 kVA) on natural gas and liquid propane.
What type of fuel does the QT03624GNAX use?
This generator is designed for natural gas or liquid propane. It comes pre-configured for natural gas but can be converted.
How often should I change the oil in my Generac generator?
Generac recommends changing the oil every 100 hours of operation or annually, whichever comes first. Use SAE 5W-30 synthetic oil.
Can I install this generator myself?
Professional installation by a licensed electrician is strongly recommended. The unit requires a transfer switch and must comply with local codes.
What is the noise level of the QT03624GNAX?
The noise level is approximately 67 dB(A) at 23 feet (7 meters), which is comparable to a normal conversation.
Does the generator have an automatic shutdown feature?
Yes, it includes automatic shutdown for low oil pressure, over-temperature, and over-speed to protect the engine.
What transfer switch is compatible?
Generac recommends the RTS series automatic transfer switch, sized appropriately for 36 kW (e.g., RTS200A3).
How do I reset the generator after a fault?
Turn the controller to OFF, then back to AUTO. If the fault persists, check the error code on the display and consult the manual.
What is the warranty period for this generator?
The Generac QT03624GNAX comes with a 5-year limited warranty covering defects in materials and workmanship.
Can I run the generator on natural gas only?
Yes, it is factory set for natural gas. To use liquid propane, a conversion kit and adjustment are required. Consult a professional.
User questions about QT03624GNAX Generac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Generator in PDF format for free! Find your manual QT03624GNAX - Generac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QT03624GNAX by Generac.