Chronomat Evolution - Wristwatch Breitling - Free user manual and instructions

Product Type	Automatic Chronograph Watch
Brand	Breitling
Model	Chronomat Evolution
Movement	Automatic (self-winding), Breitling Caliber 13
Case Material	Stainless Steel
Case Diameter	43 mm
Case Thickness	15 mm
Weight	Approx. 150 g (depending on strap)
Water Resistance	100 meters (330 feet)
Crystal	Scratch-resistant sapphire with anti-reflection coating
Power Source	Self-winding, no battery required; power reserve approx. 42 hours
Main Functions	Time, date, chronograph (12-hour, 30-minute, 6-second counters), tachymeter
Strap	Stainless steel bracelet or leather strap (optional)
Clasp	Deployment clasp with safety push-pieces
Care and Cleaning	Rinse with fresh water after saltwater exposure; clean with soft cloth; avoid chemicals
Safety	Do not operate pushers underwater; ensure crown is fully pushed in before immersion
Parts and Repairability	Authorized service centers recommended; genuine spare parts available
General Information	Swiss made; recommended service every 3-5 years

Frequently Asked Questions - Chronomat Evolution Breitling

How do I wind the Chronomat Evolution manually?

Unscrew the crown to position 1 (winding position) and turn it clockwise about 30-40 rotations until you feel resistance. This fully winds the mainspring.

How do I set the time and date?

Pull the crown to position 2 for date setting (turn clockwise) and to position 3 for time setting. Turn the crown to adjust the hands. Avoid changing date between 9 PM and 3 AM to prevent damage.

How do I use the chronograph?

Press the start/stop button (2 o'clock) to start or stop the timer. Press the reset button (4 o'clock) to reset all chronograph hands to zero.

What is the water resistance rating and can I swim with it?

The Chronomat Evolution is water resistant to 100 meters (330 feet). It is suitable for swimming but not for diving. Ensure crown is screwed down.

How often should I service my Breitling?

Breitling recommends a complete service every 3 to 5 years to maintain accuracy and water resistance. Use an authorized service center.

What should I do if the watch stops running?

First, wind the watch manually. If it still does not run, it may need servicing. Avoid shaking; take to an authorized dealer.

Is the crystal scratch-resistant?

Yes, the watch features a scratch-resistant sapphire crystal with anti-reflective coating. However, it can still break under extreme impact.

Can I replace the strap myself?

Yes, but it is recommended to have it done by a professional to avoid damaging the case. The bracelet uses a screw pin system.

How do I clean my Chronomat Evolution?

Use a soft, lint-free cloth. For deeper cleaning, rinse with lukewarm water and mild soap, then dry thoroughly. Avoid ultrasonic cleaners unless specified.

What does the tachymeter scale measure?

The tachymeter calculates speed based on time over a fixed distance. For example, use the chronograph to measure 1 km; the hand will indicate speed on the bezel.

USER MANUAL Chronomat Evolution Breitling

YOUR BREITLING CHRONOMETER

A chronometer is a high-precision instrument that has successfully passed the entire battery of tests imposed by the COSC (Swiss Official Chronometer Testing Institute), a neutral and independent body which individually tests each movement according to the prescriptions in force.

The certification test for wristwatches with sprung balance oscillators, according to the ISO 3159 norm, consists of observing each movement for 15 days and 15 nights, in 5 positions and at 3 different temperatures (8°, 23°C, 38°C). In order to earn the prestigious chronometer label, a movement's performances must meet 7 very strict criteria, including a daily variation in rate ranging between only -4/+6 seconds.

The term "chronometer" should not be confused with that of "chronograph", which is a complicated watch fitted with an additional mechanism enabling the measurement of the duration of an event. A chronograph is not necessarily chronometer-certified, but all BREITLING chronographs carry the much-coveted title of "chronometers".

PREPARING THE WATCH FOR USE

WINDING - TIME-SETTING

Nota bene: mechanical watches endowed with a date, day, month or moon-phase indicator are equipped with a complex mechanism that is set into motion between 8 pm and 3 am. It is therefore vital to avoid adjusting the calendar or moving the time backwards during this period.

1. Unscrew the water-resistant crown in an anti-clockwise direction. Wind the watch by 40 clockwise turns of the crown.
2. Pull the crown out to position 2 and turn the hours forwards to adjust the date which jumps at midnight.
3. Pull the crown out to position 3. Turn the hands so as to make the calendar jump once when the hands pass through midnight. Then adjust the hour and minute.
4. Push the crown back to position 1. Press it gently, turning it gently in a clockwise direction, then tighten it again until you feel some resistance. Do not force!

USING THE CHRONOGRAPH

I. MEASURING A SINGLE SHORT TIME

Your chronograph is equipped with security pushpieces which ensure enhanced water-resistance and provide effective protection against shocks. Consequently, pushpieces should only be activated after unscrewing the retaining ring.

Nota bene: it is important to keep the pushpieces screwed in when the chronograph is not in use.

1. Press pushpiece A to start the chronograph. Hand 3 shows the measurement in seconds.

2. Stop the measurement by pressing pushpiece A once more. The measurement is done in hours (totalizer 1), minutes (totalizer 2), seconds and 1/4 of a second (hand 3).

3. Return the chronograph to zero by pressing push-piece B.

II. MEASURING AN INTERRUPTED SHORT TIME

1. Press pushpiece A to start the chronograph. Hand 3 allows you to follow the measurement in seconds.

1. To interrupt the measurement, press pushpiece A once more. To restart the time measurement, press pushpiece A. This procedure makes it possible to add several short times.

1. The chronograph is reset to zero by pressing push-piece B, once the final measurement has been stopped.

SPECIAL CHARACTERISTICS

USING THE TACHOMETER

The tachometer is the graduation on the dial or flange of your BREITLING chronograph enabling you to determine average speeds or hourly productivity rate, based on an observation period of less than 60 seconds.

1. Average or mean speed

Using the chronograph to measure the time required to cover a kilometre or a mile. If it takes 20 seconds to cover 1km or 1 mile, the scale respectively indicates an average speed of 180km / h or 180 miles/h.

1. Hourly productivity rate

Measuring the time required to produce 1 unit. If the chronograph is stopped at 40 seconds, the tachometric scale indicates 90, corresponding to an hourly productivity rate of 90 units.

1

^1/_100 th OF AN HOUR DIAL DISPLAY

Your BREITLING chronometer is equipped with a scale dividing the hour into hundredths, thus making it easier to read off the minutes on a decimal base. E.g.: 0.6h = 36 minutes.

RIDER-TAB BEZEL

The bezel of your watch is fitted with 4 hour-markers called rider-tabs: they are used as points of reference to mark the time of departure or a limit time one wishes to remember. On models with no chronograph functions, they also serve as "minute chronograph" enabling one to measure time elapsed in minutes.

Rider-tabs make it easier to rotate the bezel by giving a better grip (especially when wearing gloves) and additionally protect the glass.

Two analog clocks showing 12 o'clock with red hands and black numerals (no text or symbols)

SUN COMPASS

Your BREITLING chronometer may be used as a sun compass, thus enabling you to determine the Northerly-Southerly direction. For regions that have instated daylight saving time, subtract one hour when directing the watch.

In the Northern hemisphere

Point the hour hand precisely towards the sun. In relation to the watch dial, the point located midway between the current time and 12 o'clock indicates the South, the North being exactly opposite.

In the Southern hemisphere

Point the hour-marker located at 12 o'clock on the dial precisely towards the sun. In relation to the watch dial, the point located midway between the current time and 12 o'clock indicates the North, the South being exactly opposite.

MAINTENANCE

Your BREITLING chronometer is a sophisticated instrument which is constantly subjected to a wide variety of stresses and strains. Within a very small volume, a large number of components contribute to handling all the functions. Their mechanical action inevitably leads to a certain amount of wear and tear, which may be controlled by maintenance consisting of renewing the lubrication and replacing worn components. Like any precision measurement instrument, your watch must be regularly maintained in order to function at its highest level of potential: we recommend a regular service every two years, while the complete overhaul should be scheduled about every five years. Your authorized BREITLING dealer will be pleased to handle this for you.

WATER-RESISTANCE

The movement of your chronometer is protected by a complex case fitted with gaskets to ensure its water-resistance. Under the influence of various external agents – perspiration, chlorinated or salt water, cosmetics, fragrances or dust – these gaskets gradually deteriorate and must be regularly replaced. If used intensively in water, we recommend that this be done once a year as part of a service. If the watch is only occasionally used in water, this operation may be carried out every two years. Moreover, a

water-resistance test should be done every year; it takes only a few minutes and can be performed by your authorized BREITLING dealer.

BREITLING models are water-resistant to varying degrees. The extent of the water-resistance is expressed in meters (M) on the back of each case. This indication is a standard value and does not indicate an absolute depth of immersion. The crown and pushpieces must not under any circumstances be operated under water or when the watch is wet. The table below indicates the conditions in which your watch may reasonably be used, according to its degree of water-resistance.

ACTIVITIES / DEGREE OF WATER-RESISTANCE	3bars/30M/100FT	5bars/50M/160FT	10bars/100M/330FT	50bars/500M/1,650FT
Splashing	√	√	√	√
Shower, swimming, surface water sports		√	√	√
Water-skiing, dives, snorkeling			√	√
Diving				√

USEFUL TIPS

BREITLING genuine leather straps are crafted with the most refined materials and represent extremely high-quality products. Like all objects in natural skin (shoes, gloves, etc.), their length of life varies considerably.

according to the conditions in which they are worn. In particular, water, cosmetics and perspiration accelerate the aging process. A metal or synthetic BREITLING bracelet is thus better suited to activities involving frequent contact with water or humidity.

BREITLING metal cases and bracelets are made from the finest alloys and guarantee sturdiness and wearer comfort. Regular cleaning by rinsing and brushing in clear water will keep your watch shiny. This operation is strongly recommended after each immersion in salty or chlorinated water. For watches fitted with a leather strap, proceed in the same manner, while avoiding getting the strap wet.

WHAT TO AVOID

Like any valuable objects, BREITLING chronometers deserve special care. It is important to protect them from jarring and knocks by hard objects, and not to expose them to chemical products, solvents, dangerous gases, or magnetic fields. Moreover, your BREITLING chronometer is designed to run smoothly at temperatures ranging between 0°C and 50°C.