EB65264 - Heating KENMORE - Free user manual and instructions

Product Type	Wall-Mounted Panel Heater
Brand	Kenmore
Model	EB65264
Power Supply	120 V AC, 60 Hz
Voltage	120 V
Frequency	60 Hz
Installation Type	Wall-mounted
Usage Location	Indoor residential, office, personal shop
Safety Features	Automatic overheat protection, polarized plug
Plug Type	Polarized
Clearance Requirements	At least 3 feet (0.9 m) from front; keep sides and rear clear
Surface Type	Smooth, non-combustible surface for placement
Painting	Water-based paints rated at 250°F (120°C) or higher; do not paint with oil-based paints
Cleaning	Damp cloth only; do not immerse in water
Maintenance Frequency	At least once a year
Warranty	1 year limited warranty
Reset Procedure	Turn off, unplug, wait 10 minutes, plug in, turn on
Not for Use In	Bathrooms, laundry areas, near water, outdoors
Pet Safety	Birds and small pets sensitive to fumes during initial use

Frequently Asked Questions - EB65264 KENMORE

How do I install the Kenmore EB65264 wall panel heater?

Choose a wall location near an outlet, about 6 inches above floor. Mark four drill points through the panel mounting holes, drill holes, insert plastic mount fittings, attach panel, secure with screws, and cover with caps.

What safety features does the heater have?

The heater has automatic overheat protection. If it overheats, it turns off automatically. To reset, turn off, unplug, wait 10 minutes, then plug in and turn on.

Can I paint the heater?

Yes, you can paint the front panel only. Use water-based paints rated for 250°F (120°C) or higher. Do not use oil-based paints. Let paint dry naturally for at least 24 hours before use.

How do I clean the heater?

Unplug and allow the heater to cool completely. Clean the outside with a damp cloth. Do not use harsh chemicals or abrasives. Never immerse in water.

What should I do if the heater shuts off automatically?

Turn the On/Off switch to 'O', unplug the heater, wait 10 minutes for it to cool down, plug it back in, and turn the switch to 'I'. Ensure nothing is blocking the air intake or exhaust.

Is the heater safe to use in a bathroom?

No, the heater is not intended for use in bathrooms, laundry areas, or near water. Use only in dry indoor locations.

Can I use an extension cord with this heater?

Avoid extension cords due to fire risk. If necessary, use a minimum 14 AWG cord rated at least 1875 watts. However, direct plug-in is recommended.

What is the warranty period?

Kenmore provides a 1-year limited warranty from the date of sale against defects in material or workmanship. Proof of sale required for free replacement.

Why does the heater emit a smell or smoke when first used?

During initial use, manufacturing coatings and lubrication burn off. This is normal and will dissipate after a short time.

Can the heater be used around birds or small pets?

Birds and some small pets are sensitive to fumes from the initial use. It is recommended to avoid using the heater around them until the manufacturing coatings have burned off.

USER MANUAL EB65264 KENMORE

KENMORE LIMITED WARRANTY

FOR ONE YEAR from the date of sale this product is warranted against defects in material or workmanship.

WITH PROOF OF SALE, return a defective product to the retailer from which it was purchased for free reimbursement.

This warranty is void if this product is ever used for other than private household purposes.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

GARANTÍA LIMITADA DE KENMORE

Sears Brands Management Corporation, Hoffman Estates, IL 60179

P/N CZ448SRMAN

Use & Care Guide

Panel Calefactor de Pared

Model/Model: 127.96001610

Before Using Your Wall Mounted Heater....2

Important Safety Instructions....2 - 4

Parts and Features....5

Operating Instructions....6-7

Care and Maintenance....7

Warranty Back Cover

BEFORE USING YOUR NEW HEATER

Please read this guide. It will help you to operate your new Kenmore Heater in the safest and most effective way.

Keep this book and your sales check (receipt) in a safe place for future reference.

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions in this guide before using your Heater.

This product is intended for indoor residential, office and personal shop use only, not for industrial or other commercial applications. Use only with electrical wiring that is in good working order and that meets applicable codes and ordinances. If you have any questions whether your wiring is adequate, consult a qualified electrician.

While using your Heater, you should follow the IMPORTANT

SAFETY INSTRUCTIONS listed below. As part of those instructions, we have

used the word " ▲WARNING to indicate the level of hazard:

⚠ WARNING: indicates a hazard which, if not avoided, could result in injury

or death.

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Read all instructions before using this Heater.

2. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause electrical shock, fire, or injury to persons.

3. Do not operate the heater with a damaged power cord or after the heater malfunctions or has been dropped in any manner.

4. Do not use heater unattended. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

5. Do not place the heater on a small, unlevel, uneven or any surface which might allow Heater to tip or fall.

6. For proper operation, the heater should be placed on a smooth, non combustible surface.

IMPORTANT SAFETY INSTRUCTIONS

1. Always unplug the heater when not in use.
2. Do not operate heater with blade guards or any safety device remove.
3. Do not run power cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from traffic area where it will not be tripped over.
4. Avoid the use of extension cords due to risk of fire. If an extension cord must be used, the cord must be a minimum 14AWG and rated not less than 1875 watts.
5. Do not insert or allow any object to enter any openings on the heater. Doing so may cause electric shock and/or fire hazard.
6. This product is intended for indoor residential, office and personal shop use only, not for industrial or other commercial applications. This warranty is void if this product is ever used for other than private household purposes.

WARNING: SHOCK HAZARD

Use your heater only in dry environments. This heater is not intended for use in a bathroom, laundry area, or similar locations, or near sinks, washing machines, swimming pools or other sources of water. Never locate heater where it may fall into a bathtub or other water container. Do not use heater outdoors. Do not use in damp environments such as flooded basements.

⚠ WARNING: HOT SURFACES

Do not touch body of heater when in use. This heater is hot when in use, to avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater.

⚠ WARNING: FIRE HAZARD

Heater has hot and arcing or sparking parts inside. Do not use near combustible materials or flammable gases or sources of heat. DO NOT USE in areas where gasoline, paint or flammable materials are used or stored. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked. Do not place the heater near a bed because objects such as pillows or blankets can fall off the bed and be ignited by the heater. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock, fire, or damage the heater.

SAVE THESE INSTRUCTIONS!

IMPORTANT SAFETY INSTRUCTIONS

⚠ WARNING: ELECTRICAL SHOCK HAZARD

Do not use with damaged cord or plug. Use with adequate electrical system that is up to code. The supply cord has a polarized plug. As a safety feature this plug will fit in a polarized outlet only one way. To prevent electric shock, match wide blade of plug to wide slot, fully insert plug. If the plug does not fit contact a qualified electrician. Never use an extension cord. DO NOT attempt to defeat this safety feature. Do not operate any heater with a damaged cord or plug or after heater malfunctions, has been dropped or damaged in any manner. Do not operate heater with a broken heating element or ceramic cone or any visual imperfections. For all repairs contact a qualified service dealer. Do not operate heater with its ventilation obstructed.

PET OWNERS NOTE

The health of birds and some small pets are extremely sensitive to the fumes given off during the initial use of many appliances. Although these fumes are not harmful to humans, it is recommended that this heater not be used around birds and small pets during its initial use until the manufacturing corrosion coatings burn off.

SAVE THESE INSTRUCTIONS!

PARTS AND FEATURES

It is important to know your heater's parts and features to ensure its proper and safe use. Review these before using your heater.

WALL PANEL HEATER

Fig. 1

OPERATING INSTRUCTIONS

INSTALLATION INSTRUCTIONS

1. Choose a wall location for the heater that has an electrical outlet within reach of the heater power supply cord.
   NOTE: For best heating results mount the heater approximately 6 inches above the floor and away from windows and doors.
   CAUTION: The heater must not cover or be mounted below a power outlet, or overheating of the outlet may occur.
2. Lay the heater panel against the wall, and insert a pencil point through the panel mounting holes to mark the 4 drill points on the wall.
3. Use the provided drill bit to drill the mounting holes in the wall.
   CAUTION: Before drilling into wall, check that the area is free of electric wiring and pipes that may be embedded in the wall.
4. Insert the the plastic mount fittings (Fig. 2) into the wall holes.
5. Fit the heater panel onto the four mount fittings (Fig. 3).
6. Use a phillips screwdriver to screw the provided fastening bolts into the mount fittings to secure the panel in place (Fig. 4).
7. Push the provided cover caps onto the fastening bolts (Fig. 5).

PAINTING INSTRUCTIONS

The panel may be painted to suit decor.

CAUTION: Use water based paints only, rated at 250°F (120°C) and above. Oil based paints MUST NOT be used.

Only the front of the panel can be painted.
DO NOT use the heater to dry the paint.
Leave paint to dry naturally for at least
24 hours before operating heater.

HEATER OPERATION

Always operate the heater in the upright position following all instructions and recommendations listed in this manual.

HEATER CONNECTION

Plug heater directly into a 120 volt A.C. 60 Hz outlet. Be sure the plug fits tightly in outlet. A loose connection may cause overheating and damage to the plug or heater.

NOTE: To prevent overloading a circuit, do not plug the heater into a circuit that is servicing other electrical needs.

OPERATING INSTRUCTIONS

POWER INDICATOR LIGHT

When the unit is turned on, the power indicator light in the On/Off switch will illuminate to tell you the heater is functioning

TURNING THE HEATER ON

To start the heater, turn the On/Off Switch from the "O" position to the "I" position. During the heaters initial use, you may experience a slight odor or smoking. This is the lubrication "burning off". This is normal and will go away

IMPORTANT SAFETY FEATURES

The heater is equipped with an automatic overheat protection device located inside the body of the heater. If the heater gets too hot for any reason, the automatic overheat protection device will turn the heater off. The heater must be reset to resume operation. To reset the unit, turn the On/Off switch to "O" and unplug the heater. Wait for 10 minutes for the heater to cool down. Plug the heater back in and turn the On/Off switch to the "I" position. To prevent further automatic shut-off, do not place furniture or other objects closely in front of the heater.

CARE AND MAINTENANCE

CLEANING

CAUTION: Before cleaning the heater be sure to disconnect power cord and allow the heater to cool completely.
The heater should be cleaned at least once a year to maintain proper performance. Clean the outside surface with a damp cloth. Allow heater to dry completely before use. Do not use harsh chemical or abrasive cleaners.
WARNING: To prevent personal injury or heater malfunction, NEVER immerse the heater in water.
▲ CAUTION: DO NOT use the heater if it has malfunctioned or become damaged in any way.

REPAIR

Do not attempt to open the heater to clean or otherwise service the inside. If the heater does not function normally, call the following customer assistance number to arrange for possible heater service and repair: 1-866-877-1889

STORAGE

Keep original carton for storage of the Wall Panel Heater. Coil and tie the power cord to avoid damage during storage.

ÍNDICE

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Panel Calefactor de Pared

Fig. 1

Silhouette of a hand holding a gavel, no text or symbols visible