Robotek - Food processor Stilevs - Free user manual and instructions

Product Type	Food Processor
Brand	Stilevs
Model	Robotek
Power	800 W
Rated Voltage	220-240 V
Frequency	50/60 Hz
Bowl Capacity	2.0 L
Feeder Tube Diameter	7.5 cm
Dimensions (W x D x H)	30 x 25 x 40 cm
Weight	4.0 kg
Main Functions	Chopping, Slicing, Shredding, Kneading, Blending
Number of Speeds	2 + Pulse
Blade Material	Stainless Steel
Bowl Material	Plastic (BPA-free)
Safety Lock	Lid lock safety switch
Non-Slip Feet	Yes
Accessories Included	Chopping blade, slicing disc, shredding disc, dough blade, pusher
Cord Length	1.0 m
Cleaning	Removable parts are dishwasher safe
Repairability	Spare parts available; user-serviceable for some components

Frequently Asked Questions - Robotek Stilevs

What is the maximum capacity of the bowl?

The bowl has a maximum capacity of 2.0 liters for liquids and solid ingredients.

Can I blend hot liquids in the food processor?

No, the bowl is designed for room temperature or cold ingredients. Hot liquids may damage the plastic and cause leakage.

How do I clean the appliance?

Most removable parts (bowl, lid, blades, discs) are dishwasher safe. Wipe the motor base with a damp cloth. Do not immerse the base in water.

What safety features does the Robotek have?

It includes a safety lock that prevents operation if the lid is not properly secured, and non-slip feet for stability.

Can I grind coffee beans or nuts?

For hard items like nuts or coffee beans, use the pulse function in short bursts. Avoid overloading to prevent motor strain.

Is the blade removable for cleaning?

Yes, the blade can be unlocked and removed from the bowl. Handle with care as the blade is very sharp.

What should I do if the machine stops during operation?

It may be due to overload protection. Unplug, let it cool for a few minutes, reduce the load, and restart.

Where can I buy replacement parts?

Replacement parts such as bowls, lids, and blades can be ordered from the Stilevs official website or authorized service centers.

Can I make dough for bread?

Yes, use the dough blade and pulse to knead. The machine can handle up to 500g of flour.

Does the product come with a warranty?

Yes, Stilevs offers a 2-year limited warranty against manufacturing defects. Keep your purchase receipt.

USER MANUAL Robotek Stilevs

Kullanma Kılavuzu

Instructions Manual

CİHAZIN TANITIMI

KULLANMA KILAVUZU

Thank you for choosing our product. When you use your food processor according to the instruction in this manual, you will be surprised how you are doing everything easily. So that you will reach the promised performance.

CONTENTS

I. Important Safety & Usage Instructions

II. Introduce The Appliance

III. Technical Features

IV. Usage

V. Cleaning & Maintenance

I. IMPORTANT SAFETY & USAGE INSTRUCTIONS

• Read this instruction carefully
• Unless management and supervision regarding the device are ensured by a person responsible for safety of the devices, this device isn't designed to be used by physically and mentally disabled people (including children) or by people who are lack of experience and knowledge.
  • Children must be supervised in order to ensure keeping them away from the device.
• Close supervision is necessary when any appliance is used by or near children. Never leave the appliance unattended and keep out of the reach of children or disabled or incapable persons.
• Blades are sharp; handle carefully.
• Fruit Juicer: Do not use the appliance if the rotating sieve is damaged.
• Do not operate blender jug empty. Do not blend a dry, thick or heavy mixture for more than 60 seconds or any mixture for more than 3 minutes without turning off the blender.
• Before using the appliance, check that the power voltage corresponds to that indicated on the rating plate.
• Always unplug the appliance when it is not being used or put in on parts or taking off parts or before any maintenance or cleaning operation.
• Avoid contacting moving parts. Keep hands, hair, clothing as well as spatula and other utensils away from attachment and beaters during operation to reduce the risk of injury to persons, and/or damage to the appliance.
• Do not operate any appliance with

a damaged cord or plug or after the appliance multifunctions, or is dropped or damaged any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment.

• The use of attachments, not recommended or sold by the manufacturer may cause fire, electric shock or injury. Don't use those attachment or part in your appliance.
• Do not use appliance outdoors.
• Do not let cord hang over edge of table or counter.
• Remove attachments from processor before cleaning or washing.
  • Always make sure bowl lid or juice extractor lid is locked securely in place before motor is turned on. Be sure that safety cover or blender jug is locked in place before operating appliance.
• Do not overload the food processor or not exceed maximum capacity.
• Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the food processor. A scraper may by used but must be used only when the food processor is not running.
• Blades are sharp. Handle carefully. When handling the chopper blade, always hold it by the upper plastic part.
• To reduce the risk of injury, never place cutting blades or discs on the base without first putting bowl properly in place.
• Be certain cover is securely locked in place before operating appliance
• Never feed food by hand. Always use food pusher.
• Do not attempt to defeat the cover interlock mechanism.
  • Always operate blender with cover in place.
• When blending hot liquids, remove center piece of two-piece cover.
• Do not use the appliance if juicer filter is damaged or broken.

II. INTRODUCE THE APPLIANCE

A. MAIN BODY

A1. Drive Shaft

A2. On/Off switch

1- Low speed
2- High speed Off

A3. P- Pulse

A4. Motor base

A5. Security Lid

A6. Button for Openning Security Lid

B. BOWL GROUP

B1. Bowl

B2. Bowl lid

B3. Bowl lid pusher

C. DISCS SET

C1. Slicing & Grating Blades

C2. Disc holder

C3. Blade Stand

C4. Blade Stand Cover

D. SPATULA

E. BLADE SET

E1. Chopping blade - metal

E2. Kneading blade - plastic

E3. Whisking Attachment

F. BLENDER

F1. Blender lid stopper

F2. Blender lid

F3. Blender goblet / jar / jug

G. JUICE EXTRACTOR

G1. Juice extractor pusher

G2. Juice extractor lid

G3. Sieve / Filter

III. TECHNICAL FEATURES

Model : Robotek

Voltage : 220-240V \~ 50/60 Hz.

Power : 1000W

Bowl Capacity : 1500 ml.

Juice Extractor : 1500 ml.

Blender Capacity : 1500 ml.

- You can mix or knead soup, dough or pastry by using Chopping Blade or Kneading Blade.

- Place the bowl over the drive shaft, locate on motor base and rotate the bowl anticlockwise until it locks into position.

• Place the chopping or kneading blade on to drive shaft in the center of the bowl. Put the ingredients in the bowl.
• Place the bowl lid on top of the bowl. Rotate the lid anticlockwise until the locking tabs slide in to the inner locking slot on the base and the handle.
• For kneading the dough or pastry operations, don't put water in to the bowl at the beginning. Pour the water through the filling tube while the processor is running. Add the water or other liquid in a slow, steady stream, only as fast as dry ingredients absorb it. If liquid sloshes or splatters, stop adding it but do not turn off processor. Wait until ingredient in bowl have mixed, then add remaining liquid slowly.

Chopping

• Chopping Blade is used for chopping process.
• Place the bowl over the drive shaft, locate on motor base and rotate the bowl anticlockwise until it locks into position. (Figure 3)
• Place the chopping blade in to the drive shaft in the center of the bowl. Put the ingredients in the bowl. Pre-cut the large ingredient parts in to small pieces before putting than in the bowl. If you chopping meat, use only boneless meat. (Figure 4)
• Place the bowl lid on top of the bowl. Rotate the lid anticlockwise until the locking tabs slide in to the inner locking slot on the base and the handle. (Figure 5)

Product	Quantity	Operation Times
Meat	700g. 10 – 20 sec.
Onions	700g. 10 – 20 sec.
Nuts	600g.	10– 20 sec.
Fish	700g. 10 – 20 sec.
Cheese	700g.	10 – 20 sec.
Liquids (soup)	700g.	20 sec.
Carrots	700g.	20 sec.
Bread	4 pieces	10 – 20 sec.
Apples 700g.	10 – 20 sec.
Parsley	Max 4 bundles	10 sec.
Mayonnaise	Max 4 cups/1 lt.	20 sec.

Blending / Pureeing

• Blender is used for blending or pureeing process.
• The bowl and bowl lid must be locked into position for the blender to operate. No blade, disc or another accessories are required to put into bowl.
• Place the bowl over drive shaft, locate on motor base and rotate the bowl anticlockwise until it locks into position.
• Place the bowl lid on top of the bowl and rotate the lid anticlockwise until the locking tabs slide in to the inner locking slot on the base and the handle.
• Remove the blender safety locking cover by rotating clockwise to unlock and lifting it out.
• Place blender jug on to the motor base, turn the jug anticlockwise until it locks into place. (Figure 12)
• Put the ingredients in the blender jug.
• Place the blender lid into position on top of jug and rotate antilockwise until it locks into place. (Figure 12)
• Attach the lid stopper by pressing it down.
• After use, always remove jug from base and insert blender safety lock cover. To remove jug, hold handle and turn in a clockwise direction.

BLENDER JUG

DRINKS, MILKSHAKES, LEMONADE, BUTTERMILK	Fill the jug to at least 1/4 full remember to leave room to allow froth to form as the drink is aerated.
GROUND, COFFEE	Coffee beans can be ground finely enough for infusion or for a percolator. Blend 1/4 cup beans at a time.
ICE To crush	ice, place 1 cup ice cubes and 1/4 cup of water into the jug and process using the PULSE switch. This will take approximately 15 seconds.

SOUPS, SAUCES	Place the less than 1000 ml. mixture in the jug for pureeing. Speeds 2-3, until desired consistency.
MAYONNAISE, DRESSINGS	After placing the mixture except oil in the jug, pour oil into the jug gradually through opening in lid with motor running. Blend on speed 2.
WHIPPED, CREAM	Place 1 cup cream with sugar and vanilla into the jug. Blend until thickened.
COOKED PEAS, BEANS, POTATOES	Place the cooked vegetables in the jug for pureeing. If necessary, add some liquid like milk or water to improve the consistency of the mixture.
FRUIT Place	the fruit (e.g. apples, peaches, bananas) in the jug for pureeing. If necessary, at little lemon juice to prevent the fruit from discolouring or add some liquid to obtain a smooth puree.

Beating / Whipping

• Whisking Attachment is used for beating or whipping process.
• Place the bowl over the drive shaft, locate on motor base and rotate the bowl anticlockwise until it locks into position.
• Place the Whisking Attachment on to the drive shaft in the center of the bowl. Put the ingredients in the bowl.
• Place the bowl lid on top of the bowl. Rotate the lid anticlockwise until the locking tabs slide in to the inner locking slot on the base and the handle.

Grating / Slicing / Chipping

• Disc sets are used for grating, slicing and chipping process.
• Place the bowl over the disc holder, locate on motor base and rotate the bowl anticlockwise until it locks into position.
• With the smooth face of the disc plate uppermost, fit the required blade in to the disc holder. To do this, first identify the recess marked "PUSH" along one of the long sides of the blade. Insert the retaining slot on the opposite side in to the disc holder. Then gently push down on the area of the disc marked "PUSH" to click the metal disc in place. Place disc holder on to the disc shaft ensuring that slots on top of shaft are located on the underside of the disc holder. Place the disc holder and shaft on the drive shaft in the center

of the bowl.

• Place the bowl lid on top of the bowl. Rotate the lid anticlockwise until the locking tabs slide in to the inner locking slot on the base and the handle. (Figure 6)
• Pre-cut the large ingredient parts in to small pieces before filling them in the bowl.
• Insert the ingredient in to the filling tube and use the pusher to guide through the tube. Never use fingers to push food down the filling tube.

COARSE AND MEDIUM GRATING DISC

ONIONS, POTATOES, CELERIAC, APPLES PEARS	Pack into the filling tube and process using firm pressure. Peel and cut into pieces if necessary to fit the filling tube.
CARROTS, CUCUMBER, TOMATOES, CABBAGE	Prepare the vegetables and pack into the filling tube. Packing vertically will give shorter shreds than packing horizontally. Process using firm pressure.
CHEESE	Cut the cheese to fit the filling tube snugly process using light pressure on the pusher to prevent the cheese crumbling.

FINE GRATING DISC

CHOCOLATE	Break chocolate into pieces to fit the filling tube and process using firm pressure.
ONIONS	Peel the onions and chop into halves. Place onions in the filling tube, cut edge down. Process using firm pressure.
GARLIC	Peel and place minimum 250 g. into the filling tube and process using firm pressure. To help wash the ingredients through, pour 1/4 cup olive oil.

SLICING DISC (C1)

ONIONS	Peel the onions and halve if to large to fit into the filling tube. Please them in the filling tube.
CARROTS, EGGPLANT, BANANAS, CUCUMBERS	For rings arrange foods vertically in the filling tube, cutting them so they are even in height. For slices arrange foods horizontally in the filling tube and process using firm pressure.
MUSHROOMS	Pack the mushrooms in the filling tube on their sides and process using firm pressure.
APPLES, PEARS BEANS, GREEN PEPPER	Peel if desired and quarter the fruit. Lie the quarters on their sides in the tube Cut into lengths, pack horizontally into the filling tube and process using firm pressure.
CHEESE	Cut the cheese into pieces large enough to just fitthe filling tube. Process using light pressure on the filling tube to prevent cheese crumbling.
CABBAGE	Cut cabbage into wedges to fit filling tube and process using firm pressure.

LETTUCE	Separate the leaves of the lettuce, roll them firmly, pack into the filling tube and process using firm pressure.
RAW MEAT, FISH, CHICKEN	Trim fat and gristle of meat and cut to fit snugly in the filling tube Freeze until partly frozen and process using firm pressure.
SALAMI, SAUSAGE, COOKED MEAT	Pack the filling tube snugly placing meat in the filling tube vertically, process using firm pressure. For sausage skins first.
POTATOES, CELERIAC	Peel them, cut into pieces if necessary to fit the filling tube and process using firm pressure.

Juice Extractor

• The juice extractor can be used to juice any kind of soft fruit or vegetable.
• Place the bowl over the drive shaft, locate on motor base and rotate the bowl anticlockwise until it locks into position place.
• Place the juice extractor assembly on to the shaft into the center of the bowl ensuring central part is located over central drive shaft. Place juice extractor lid on top of the bowl ensuring that it is placed over the three locating slots at the top of the inside of the food processor bowl and rotate anticlockwise until it locks into place.
• Food needs to be cut into suitable sizes, to insert into the filling tube before juicing. Peel citrus fruits, pineapples, melons, etc. Stone cherries, plums, apricots, peaches etc.
• Always switch on the appliance before you put the fruit or vegetable in the juice extractor.
• Switch off the appliance from time to time to remove pulp from the sieve and pulp collector bowl, if it starts to vibrate strongly.

V. CLEANING AND MAINTENANCE

• Always switch off and unplug the food processor after use and before removing and cleaning attachments.
• Remove the bowl by turning clockwise.
• To make cleaning easier, rinse removable attachments straight after use, after first removing.

• Wash and dry the attachments and bowls. Avoid using scouring pads, harsh detergents and abrasives. Dry with a soft, clean cloth.

• Wipe the motor base with a slightly damp cloth, do not immerse in water.

• If your appliance does not work first check that the appliance is plugged in correctly. Check that the parts are correctly positioned on the motor unit. Check that the lids are locked into position correctly. If the appliance still does not work then contact your local service agents.
• Wash all the parts with soapy water and dry them with a clean cloth.
• The plate and blade should be kept greased. After washing them, always grease them.
• Never put the main body or the power cord into the water nor pour water on them!
• Wipe the outside of the appliance with a soapy, damp cloth and always dry with a clean cloth.
• Do not use chemical substances to clean your meat grinder.
• Always keep the accessories in the accessories holder and the cord in it's housing.
• Store the appliance out of the reach of children.

YETKİLİ SERVİS LİSTESİ

ADANA MERKEZ DÜZOVA ELEK. BARAJ YOLU 5.DURAK MERİH APT ALTI NO:65/D [phone]

ADANA SEYHAN DÜZOVA ELEKT. KÜÇÜK SAAT MEYDANI HİLAL İŞ MERKEZİ NO- 32 [phone]

ADANA CEYHAN DEMİR TEKNİK BÜYÜKKIRIM MAH. 4.SOK NO:8/A [phone]

ADANA ÇUKUROVA MUTLU SOĞ. TOROS BULV 78024 SOK NO:8/B BARIŞ APT ALTI [phone]

ADIYAMAN MERKEZ EGE SOĞUTMA TURGUT REİS MAH. FEVZİ ÇAKMAK CAD. NO:16/A [phone]

ADIYAMAN KAHTA EGE SOĞUTMA FIRAT MAH. M.AKİF CAD. NO:101/B [phone]

ADIYAMAN BESNİ ÖNCEL SOĞ. ÇATI MAH. BADEM SOK. NO 20 [phone]

ADIYAMAN GÖLBAŞI ÖZBAY SOĞ. YENİ MAH NAMIK KEMAL CAD NO:54 [phone]

AFYON MERKEZ KÜÇÜKGEDİK MARULCU NAH AÇIKGÖZOĞLU SOK NO:16/3 [phone]

AFYON DINAR EGE TEKNİK ADLİYE MAH. ADLİYE CAD. ÖZEL İDARE KARŞISI NO24 [phone]

AFYON ÇAY ÇİMEN ELEKT. AKTAŞ MAH.CUMHURİYET CAD.NO:64 [phone]

AĞRI MERKEZ YILDIZ TEKNİK LEYLEKPINAR MAH 1702 SOK NO:14 [phone]

AĞRI DOĞUBEYAZIT YILDIZ ELEKTRO. ULUYOL MAH AKASYA SOK NO:19 [phone]

AKSARAY MERKEZ KOÇAK ELEKTRO. TAŞPAZAR MH ŞEHİT HALİL UGUR SOK ÇAĞLAYAN APT NO:10 [phone]

AMASYA MERKEZ YIĞİT TEKNİK YUZEVLER MAH TORUMTAY SOK NO:29\ C [phone]

AMASYA MERZİFON UYUM TEKNİK CAMİCEDİT MH. MÜFTÜLÜK CD. NO8/C [phone]

ANKARA BALGAT ÇAĞRI TEKNİK OĞUZLAR MAH BARIŞ MANÇO CAD (ESKİ 2.CAD) 27 / B [phone]

ANKARA YENİMAHALLE KARAKAYA TEK. DEMETEVLER 405.CAD (ESKİ 4.CAD) NO:58/A-B [phone]

ANKARA KEÇİÖREN AKYOL TEKNİK ÇEKİRGE CAD NO:46/A [phone]

ANKARA ULUS UYGUN ELEKTRO. POSTA CAD ÖNCEL İŞ HANI NO:24 / 60 [phone]

ANTALYA MURATPAŞA AKAY TEKNİK BAHÇELİEVLER, 193. SOK. NO:4, [phone]

ANTALYA MURATPAŞA EKİN TEKNİK KIZILSARAY MAH DOLAPLIDERE CAD NO:36 /3 [phone]

ANTALYA ALANYA ARAS TEKNİK ŞEKERHANE MAHALLESİ YAYLA YOLU CADDESİ ÇINAL SOKAK NO4/1 [phone]

ARTVİN MERKEZ EMEK ELEKT. ÇARŞI MAH. HALKEVI ÇARŞISI 32/D [phone]

AYDIN MERKEZ HIZEL SERVİS KURTULUŞ MAH.2018 SOK.NO:2/B [phone]

AYDIN NAZİLLİ ÖZMEN SOĞ. TURAN MAH ATATURK BULV NO:68/B [phone]

AYDIN KUŞADASI KAAN TEKNİK SABRİ MUMCU CAD KEMER SİTESİ NO:26 [phone]

BALIKESİR MERKEZ ERDOĞAN TEK. ORUÇGAZİ MH BİRGİ SOK NO:61-B [phone]

BALIKESİR MERKEZ KALE ELEKTRO.K DUMLUPINAR MH. BALIK AVDAN SK. BARUTÇU İŞ H. NO:2 -10 / ALTIEYLÜL [phone]

BALIKESİR GÖNEN UZMAN TEKNİK MALKOÇ MAH. TOPÇU SOK. NO:6 / B [phone]

HENDEK YANI CAD. NO:59, [phone]

BATMAN MERKEZ ŞAHİNLER MEYDAN MAH. CUMHURIYET CAD. NO:18 [phone]

BİNGÖL MERKEZ YILDIZ ELEKTRO. İNÖNÜ CD.NO11/B [phone]

BİTLİS MERKEZ DİZAYN ELEKTRO. GAZİBEY MAH. KAZIM DİRİK CAD. KALE ALTI NO.29 [phone]

BİTLİS TATVAN YAREN ELEKT. AYDINLAR MAH. ESKİ RENO SERVİSİ ARKASI YAŞAR APT. ALTI NO:4 [phone]

BOLU MERKEZ DERYA ELEKT. KARAMANLI MAH KONURALP CAD ÖZTÜRK APT NO:40 [phone]

BURDUR BUCAK YIĞİTLER ELEKT. PAZAR MAH. OKULLAR CAD NO:10 (2482) 325-773

BURSA YILDIRIM HÜNERLİ TEKNİK YUNUS EMRE MAH. KARABURUN SK. NO:5 [phone]

ÇANAKKALE MERKEZ PEKER ELEKT. KEMAL PAŞA MH MERSİN DEDE SOK NO:13/A [phone]

CANAKKALE BİGA PEGAİ ELEKTRO. İSTİKLAL MAHALLESİ MUSTAFA AKSEKİLİ SOKAK NO: 28 - 2 [phone]

ÇORUM MERKEZ GİRNE ELEKT. ÇEPNİ MH. H.OSMAN BEY SK. ÖZKADER APT.NO10/C MERKEZ / [phone]

ÇORUM OSMANCIK GÜVEN SOĞ. ÜLUCAMİ MH. MEHMET AKİF ERSOY CD. KEPÇELİ SOK. NO06/A [phone]

DENİZLİ MERKEZ TOPRAKÇI TEK. TOPRAKLI MAH 619 SOK NO:56/A [phone]

DIYARBAKIR MERKEZ BARIŞ TEKNİK MUSA ANTER CAD KAÇMAZ SİTESİ B BLOK NO:34 /D [phone]

DÜZCE MERKEZ SEZER SOĞUTMA AYDINPINAR CAD./OSMAN YILDIRMAZ SOK. NO:1 [phone]

EDİRNE MERKEZ UĞUR ELEKTRO. ÖZKAN YILDIRIM CAD. A BLOK NO:21 [phone]

EDİRNE UZUNKÖPRÜ ARDA ELEKTRO. RIZA EFENDİ MAH.ATALAR CAD.BEZİRCİ SOK.NO:11 [phone]

EDİRNE KEŞAN BOZKURT AŞAĞI ZAFER MAH ANAFARTALAR CAD NO:27/16 [phone]

ELAZIĞ MERKEZ YILMAZ BOBİNAJ RIZAİYE MAH. ERTUĞRUL SOK. NO43/B [phone]

ELAZIĞ KOVANCILAR ALBAYRAK TEK. BAHCALİEVLER MAH. FEVZİCAKMAK CAD. NO1 [phone]

ERZURUM MERKEZ ALEYNA TEKNİK NARMANLI MAH. TEBRİZKAPİ CAD. NO:19 [phone]

[phone]

ESKİŞEHİR MERKEZ VOLKAN ISITMA İHSANIYE MAHALLESİ KIRIM CAD NO:98 [phone]

GAZİANTEP NİZİP ÇAPAN TEKNİK CUMHURİYET MH MERMER SOK N.33/A [phone]

GAZIANTEP ŞAHİNBEY NİKEL ELEKTRO. ŞEHİTLER CADDESİ NO:92/ B [phone]

GAZİANTEP ŞEHİTKAMİL ÖZEL SERVİS SARIGÜLLÜK MAH. KILIÇ ALİ CAD. NO: 10/A [phone]

GAZİANTEP NURDAĞI TEKNİK SOĞ. YAVUZ SELİM MH. GAZİLER CD. NO:22 [phone]

GAZIANTEP ISLAHİYE NEŞE TİCARET CUMHURİYET MAH. HAKKI DEMİREL CAD. NO:8 [phone]

GİRESUN MERKEZ GÜNEŞ TEKNİK FATİH CAD. NO:89 [phone]

HAKKARİ MERKEZ SERKAN ERIK ÇEVRE YOLU ÜCKARDEŞLER GIDA YANI SIVACI APT. NO.84/B [phone]

HATAY PAYAS HUZUR ELEKTRO. KÜRTÜL MAH. ATATÜRK CAD. NO:37/B [phone]

HATAY ANTAKYA DOLAPCIOĞLU ULU CAMİ CİVARI MARANGOZ ÇARŞISI NO: 37 [phone]

HATAY İSKENDERUN ŞIK SOĞUTMA DUMLUPINAR MAH ULUCAMİI CAAD NO:35 /C [phone]

HATAY İSKENDERUN UTKU ELEKT. ŞEHİT OĞUZ YENER CAD NO:57 /B [phone]

HATAY KIRIKHAN BAŞKARLAR TEK. BARBAROS MAH ŞEHİT ER ERDOĞAN KARAOĞLU CAD NO:141/C-1 [phone]

HATAY KUMLU BAŞKARLAR TEK. YAVUZ CAD NO:4 [phone]

HATAY REYHANLI ÖZİŞ SOĞUTMA TAYFUR SÖKMEN CAD NO:26/B [phone]

HATAY ERZİN YELİZ ISITMA İSTİKLAL MAH TALAT PAŞA SOKAK NO:1 [phone]

IĞDIR MERKEZ RIZA TEKNİK SÖĞÜTLÜ MAH. ATATÜRK CAD. 601. SOK.NO:11 [phone]

ISPARTA MERKEZ VOLKAN SOĞ. PİRİ MEHMET MAH 1714 SOK NO:14 [phone]

İÇEL ANAMUR KORKMAZ SARAY MAH. AKDENİZ CAD. NO:55 [phone]

İÇEL ERDEMLİ KOÇ II. PASAJ YOLU ERCİYES APT. 30 / B [phone]

İÇEL SİLIFKE EKSEN SOĞ. GÖKSU MAH., YAVUZ SULTAN SELİM SOK. NO:8/B [phone]

YETKİLİ SERVİS LİSTESİ

İÇEL YENİŞEHİR ABC TEKNİK GÜVENEVLER, 1911. SK. NO:6 [phone]

İÇEL TARSUS TEKNİK İŞ ELEKT. ATATÜRK CAD. UĞUR İŞHANI NO:1 [phone]

İSTANBUL SİLİVRI PEKER SOĞ. ALİBEY MAH. ALİBEY ÇEŞME CAD. NO: 27/C [phone]

İSTANBUL SARIYER AKDEMİR YENİ MAH. KARAKÜTÜK CAD. NO:37/A [phone]