SEG-500 - Safe Steren - Free user manual and instructions

Product Type	Safe
Brand	Steren
Model	SEG-500
Dimensions (External)	Approx. 12.2 x 8.3 x 6.3 in (31 x 21 x 16 cm)
Weight	Approx. 8.8 lbs (4 kg)
Material	Steel
Lock Type	Electronic keypad with manual key override
Power Source	4 AA batteries (not included)
Capacity	Up to 0.6 cu ft (17 liters)
Security Features	Audible alarm after 3 incorrect PIN attempts, bolt locking mechanism
Mounting Options	Floor or wall mounting with pre-drilled holes (hardware included)
Color	Black
Interior Layout	One shelf, removable
Backup Key	2 manual keys provided
Battery Life	Approx. 6 months under normal use
Low Battery Indicator	Flashing red light and beeps
Temperature Range	32°F to 104°F (0°C to 40°C)
Certifications	Not specified (standard consumer safe)
Warranty	1 year limited warranty
Cleaning Instructions	Wipe with a damp cloth, avoid solvents
Repair Information	Contact Steren support for spare keys or electronic module

Frequently Asked Questions - SEG-500 Steren

How do I set the digital code for the first time?

Open the safe using the manual key. With the door open, press the reset button inside (usually on the back of the door). Enter your new 3-8 digit code, followed by the # or lock button. Confirm by re-entering. Test with the door open before closing.

What do I do if I forget the electronic code?

You can override the lock using the two manual keys provided. To reset the code, open with the key and follow the programming steps again. If you lose both keys, contact Steren customer support for a replacement.

How often should I replace the batteries?

Replace the 4 AA batteries every 6-12 months, or when the low battery indicator (red light flashing or beeping) appears. Use fresh alkaline batteries for best performance.

Can I mount the safe to a wall or floor?

Yes, the SEG-500 has pre-drilled holes at the back and bottom. Use the included screws and anchors to secure it to a concrete wall or wooden floor. Always mount it before storing valuables for optimal security.

What should I do if the safe beeps continuously and won't open?

This usually indicates low batteries. Insert the manual key, turn to open, and replace the batteries. If the problem persists, check for jammed bolts or contact support. Do not force the door.

How many digits can I use for the PIN?

You can program a code of 3 to 8 digits. Longer codes increase security. Avoid using obvious sequences like 1234 or repeated numbers.

Is the safe fireproof or waterproof?

The SEG-500 is not fireproof or waterproof. It is designed for basic theft deterrence. For fire and water protection, consider a rated safe. Keep it away from extreme conditions.

Can I store a laptop or tablet inside?

Yes, the internal dimensions are approximately 11 x 7 x 5 inches, which can fit a 13-inch laptop or tablet. Check your device dimensions before storing. The removable shelf can be adjusted for height.

How do I clean the safe?

Wipe the exterior and interior with a soft, damp cloth. Do not use abrasive cleaners or solvents. For the keypad, use a slightly damp cloth and dry immediately. Avoid getting moisture inside the battery compartment.

What is the warranty period and how to claim?

The safe comes with a 1-year limited warranty against defects. To claim, retain the original receipt and contact Steren support via their website or phone. Warranty covers manufacturing defects but not misuse, lost keys, or battery issues.

USER MANUAL SEG-500 Steren

Illustration of a Siemens safe with open door and internal panel (no text or symbols)

STEREN

S4-B

Illustration of a hand pressing down on a wall-mounted device with a grid panel (no text or symbols visible)

Hand inserting a device into a folder, with a red arrow indicating the direction (no text or symbols present)

Especificaciones

STEREN PRODUCTO EMPACADO S.A. DE C.V.

Electronic Lock Strong Box

Instruction Manual

V0710

Illustration of a Siemens safe with an open door and internal panel (no text or symbols)

STEREN

S4-B

Electronic Lock Strong Box

SEG-500

Thank You

on purchasing your new Steren product.

This manual includes all the feature operations and troubleshooting necessary to install and operate your new Steren Electronic Lock Strong Box. Please review this manual thoroughly to ensure proper installation and operation of this product. For support, shopping, and everything new at Steren, visit our website:

www.steren.com

IMPORTANT

• Clean only with a soft, dry cloth.
• Do not mix old batteries with new ones.
• Check the batteries regularly.

Controls

1. Green LED
2. Knob
3. Override key
4. Numerical keys
5. Yellow LED
6. Red LED

How to open the strong box

1.- Enter the security code (the factory code is 1, 5, 9), then press A or B button.
2.- If the code is correct, the green LED lights on.
3.- If the input security code is wrong, the yellow LED blinks and will emit a sound. If you enter a wrong code thrice, the equipment will block the system for 5 seconds, you cannot enter more codes during this time. If you enter a wrong code three times again, the system will block the access for 5 minutes.

Illustration of a hand pressing down on a wall-mounted device with a grid-patterned panel (no text or symbols visible)

Use the override key if you forgot the security code. This way you can the door just putting the key in the hidden lock and turning it to the left.

Setting a security code

1.- Press the red button -located inside of the strong box- while the door is open.
2.- The yellow LED lights on. You have 20 seconds to enter a new security code. You can enter from 1 to 8 numerical digits. To finalize the process, press A or B button, and the yellow LED will off.

Battery replacement

If the red LED blinks, you must change the batteries.

1.- Open the strong box's door.
2.- Release the batteries compartment cover.
3.- Place 4 batteries type AA. Pay attention to polarity.
4.- Replace the batteries compartment.
5.- Make a test before to close the door.

Hand inserting a device into a folder, showing a red arrow indicating direction (no text or symbols)

Specifications

Input: 6V --- —

Dimensions: 13.7x9.8x14.5in

Weight: 22lbs

Product design and specifications are subject to change, without notice.

STEREN

Product: Electronic Lock Strong Box

Part number: SEG-500

Brand: Steren

WARRANTY

This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from the date of purchase.

CONDITIONS

1.- This warranty card with all the required information, invoice, product box or package, and product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.

THIS WARRANTY IS VOID IN THE NEXT CASES:

If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by unauthorized personnel, improper safe keeping, among others.

a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.

www.steren.com

Abstract black-and-white geometric pattern with horizontal stripes (no text or symbols)

STEREN

Help us to improve this instruction manual, call us to:

Illustration of a classic telephone handset with keypad and ear (no text or symbols)

01800 500 9000

Customer Service Center