SC-158 - Heating Scarlett - Free user manual and instructions

Product Type	Fan Heater
Brand	Scarlett
Model	SC-158
Power Supply	220-240 V ~ 50 Hz
Power Consumption (Fan Only)	~20 W (estimated)
Power Consumption (Low Heat)	1000 W
Power Consumption (High Heat)	2000 W
Heat Settings	2 (1000 W, 2000 W) + Fan Only
Fan-Only Mode	Yes
Thermostat	Adjustable, maintains set temperature
Indicator Light	Yes
Safety Features	Overheat protection, thermal cutout
Placement	Floor or table, minimum 0.3 m from objects
Room Area	Minimum 4 m²
Housing Material	Plastic (estimated)
Dimensions (approx.)	25 x 15 x 30 cm (estimated)
Weight (approx.)	1.5 kg (estimated)
Cleaning	Wipe with damp cloth, vacuum interior on low setting
Storage	Clean and store in cool, dry place
Warranty	Standard manufacturer warranty (check local)

Frequently Asked Questions - SC-158 Scarlett

How do I adjust the thermostat on the Scarlett SC-158?

Turn the thermostat knob clockwise to increase the desired temperature and counterclockwise to decrease it. The heater will automatically cycle on and off to maintain the set temperature.

What should I do if the heater overheats and shuts off?

Unplug the heater, allow it to cool for at least 5 minutes, and ensure all vents are unobstructed. If it still doesn't work, contact a service center.

Can I use the SC-158 outdoors?

No, this heater is for indoor use only. Do not use it in bathrooms, showers, or swimming pools.

How do I clean the fan heater?

Unplug the heater and let it cool. Wipe the exterior with a soft damp cloth. Periodically vacuum the interior using a low-power setting to remove dust.

What are the power consumption levels?

The heater has two heat settings: 1000 W (warm) and 2000 W (hot). It also has a fan-only mode that uses minimal power (estimated 20 W).

Is the Scarlett SC-158 safe to use in a child's room?

Yes, but children should be supervised at all times. The heater has overheat protection and a thermal cutout for safety. Keep it away from flammable materials and do not cover it.

How far should the heater be from walls or objects?

Place the heater at least 0.3 meters from any objects and 0.9 meters from flammable materials. Ensure the cord is not in front of the air outlet.

Can I use an extension cord with this heater?

It is recommended to plug the heater directly into a wall outlet. If an extension cord is necessary, use a heavy-duty one rated for at least 2000 W.

Why does the indicator light not turn on?

The indicator light only lights up when the thermostat is set above the minimum (off) position. Ensure the thermostat knob is turned clockwise from the lowest setting.

How do I store the heater when not in use?

Clean the heater thoroughly, let it dry, and store it in a cool, dry place. Keep it out of reach of children.

USER MANUAL SC-158 Scarlett

Line drawing of a portable air conditioner fan with heat exchanger and two side fans (no text or symbols)

www.scarlett.ru

GB DESCRIPTION

1. Air outlet
2. Adjustable thermostat
3. Mode switch
4. Indicator light
5. Integrated handle

CZ POPIS BG ОПИСАНИЕ

• Please read this instruction manual carefully before use and keep in a safe place for future reference.
• Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
• Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains voltage in your home.
• For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.

- Do not use outdoors.

• Always unplug the appliance from the power supply before cleaning and when not in use.

- To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in service center.

- Do not use the appliance in immediate proximity to a bath, a shower or a swimming pool.

- Do not place appliance or parts near an open flame, cooking or other heating appliances.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- Do not leave the appliance switched on when not in use.

- Do not operate after malfunction or cord damage.

- Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the nearest service center only.

- Keep the cord away from sharp edges and hot surfaces.

- Do not pull, twist, or wrap the power cord around appliance.

- Never insert fingers, pencils or any other object through the guard when the appliance is operating.

- To reduce the risks of electric shock do not switch the appliance by wet hands.

- For repair or accessories, contact an authorized service center only.

- Operating unit should be not closer than 0.9 m to flammable or easy deformable under high temperature objects.

- When the appliance is on, move it away from the wall socket and make sure that the cord is not in front of the air outlet grill. Do not install the unit closer than 0.3 m to any objects.

- If, however, the airflow is inadvertently obstructed during use, the built-in thermal safety cutout will automatically switch off the appliance.

CAUTION:

- Do not cover the appliance when it is in use.

- Do not use the fan heater in rooms less than 4m^2 area.

OPERATION

• Set the thermostat to minimum position.
• Set the mode switch to minimum position.
• Insert the plug to the power supply.

MODE CONTROL

- Set the mode switch to the required position:

- O - Off;

- Fan (airflow without heat);

- I - Warm airflow (1000 W);

- II - Hot airflow (2000 W).

- The indicator light should light up, when you set the thermostat to any position except off.

THERMOSTAT

• Set the thermostat to maximum position.
• When the ambient temperature raises to satisfying level, slowly turn the thermostat counterclockwise until the fan heater will switch off. The room temperature thus will be kept at the set level.
• If you want to change the room temperature, you can make another regulation: turn the thermostat clockwise to arise the temperature and counterclockwise to lower it.

ATTENTION:

- Should the unit overheat, provided safety device will switch it off automatically. In such case switch the appliance off and unplug it. Check all vents and try to restart again after at least 5 minutes. If it does not operate, contact a Service center.

NOTES:

- The room must be closed, if not, using of fan heater will not make good result because of heat leakage.

CARE AND CLEANING

• The appliance should be cleaned regularly, otherwise the efficiency of heating may be reduced.
  • Always unplug the appliance and allow it to cool down before cleaning.
• Wipe the outer surface of appliance with a soft damp cloth.
• From time to time clean the inside of the appliance with vacuum cleaner, operating at low setting.

- Do not use abrasive cleaners, gasoline, thinner or other chemicals to clean the appliance.

STORAGE

• Complete all requirements of chapter CARE AND CLEANING
• Keep the appliance in a cool, dry place.