BTS30 - Loudspeaker Valore - Free user manual and instructions

Product Type	Wireless Soundbar with Alarm Clock
Brand	Valore
Model	BTS30
Power Output	10W x 2 (20W total)
Speaker Configuration	2 x 2.0 channels
Wireless Range	Up to 10 meters
Battery Type	Built-in Lithium-ion
Battery Capacity	7.4V, 2000mAh
Charging Time	Approximately 5 hours
Playback Time	Up to 6 hours
Standby Time	Up to 120 hours
Power Input	DC 5V/1A
Supported Storage	microSD card up to 32GB, USB drive
Bluetooth Function	Handsfree calling, music streaming
Alarm Clock	Dual alarms with 6 ringtone options
Clock Display	Digital LED display with time and alarm indicators
Equalizer Modes	System default bass
Audio Inputs	AUX (3.5mm), Bluetooth, microSD, USB
Included Accessories	USB charging cable (800mm), Auxiliary cable (800mm), RCA cable (1000mm)
Charging Indicator	Red LED when charging, off when full
Care Instructions	Keep dry; store in cool, dry place; do not disassemble

Frequently Asked Questions - BTS30 Valore

How do I pair the Valore BTS30 with my phone via Bluetooth?

First, turn on the speaker by pressing the On/Off button. Press the M button to enter Bluetooth mode. On your phone, enable Bluetooth and select 'Valore BTS30' from the list. If pairing fails, turn off the speaker and try again. Once paired, the speaker will remember your device.

How do I set the clock on the BTS30?

In clock display mode, press and hold the clock button (☐) for 3 seconds until the hour digits flash. Use the ◀/− and +/▶ buttons to adjust hours, then press the clock button again to adjust minutes. The system exits automatically after 15 seconds of inactivity; changes are not saved if you exit early.

How do I set an alarm?

In clock display mode, short press the clock button to select alarm 1 or 2. Then press and hold the clock button for 3 seconds to enter alarm setting. Adjust hours and minutes using ◀/− and +/▶, then press the clock button to choose a ringtone and enable/disable the alarm. Press and hold the clock button to save.

How do I play music from a microSD card or USB drive?

Insert a microSD card (up to 32GB) or USB drive into the corresponding slot. The speaker automatically enters microSD/USB mode. If not, press the M button until the mode is selected. Use the ◀/− and +/▶ buttons to navigate tracks.

How long does it take to fully charge the speaker?

The battery takes approximately 5 hours to fully charge using a DC 5V/1A charger. The red charging indicator turns off when fully charged. Unplug the charger after full charge to preserve battery life.

How long does the battery last on a full charge?

Playback time is up to 6 hours at moderate volume. Standby time can reach up to 120 hours. Actual battery life may vary depending on volume level and usage.

What should I do if there is no sound from the speaker?

Check that the speaker is charged and turned on. Increase the volume on both the speaker and your device. Ensure the music track is playable and the connection (Bluetooth, AUX, etc.) is properly established. If using Bluetooth, try re-pairing by disconnecting and connecting again.

How do I switch between different audio modes (Bluetooth, AUX, microSD)?

Press the M (Mode) button on the speaker to cycle through available modes. The current mode will be indicated on the display. For example, press once for Bluetooth, twice for microSD/USB, etc. When an AUX cable is inserted, the speaker automatically switches to AUX mode.

Can I use the speaker while it is charging?

Yes, you can use the speaker while it is charging. However, note that charging time may be longer if the speaker is in use. The red indicator remains on during charging.

What should I do if the speaker gets wet or stops working?

The speaker is not waterproof. If it gets wet, dry it immediately with a soft cloth. If it malfunctions, turn it off and contact technical support at [e-mail]. Do not attempt to disassemble or repair it yourself.

USER MANUAL BTS30 Valore

Thank you for purchasing the Valore Wireless Soundbar (BTS30).

• 2 x 10W speaker
• Alarm clock function
  • Supports up to 32GB microSD™ card

Important: Please read the user manual thoroughly before using your wireless speaker.

Specifications:

• Wireless range: Up to 10m
  • Built-in battery: 7.4V 2000mAh Lithium battery
• Charging time: Approximately 5 hours
• Playback/working time: Up to 6 hours
• Standby time: Up to 120 hours
  • Power input: DC5V/1A
  • Power output: 10W x 2

Package Contents:

• Wireless soundbar
  • USB charging cable (800mm)
  • Auxiliary cable (800mm)
• RCA cable (1000mm)

UNDERSTANDING THE PRODUCT

① Mode
② Previous track/Volume down
③ Play/Pause/Phone
④ Next track/Volume Up
⑤ Clock
⑥ EQ

⑦ Charging indicator
⑧ Micro USB charging port
⑨ On/Off
⑩ AUX input
⑪ Micro SD card slot
⑫ USB port

START USING THE WIRELESS SOUNDBAR

Key function brief description

[360V]	Press for 3 seconds: enter / close speaker work modePress: switch mode
Swedish	Press for 3 seconds: previous songpress: volume -
	Press and hold: press for 3 seconds reject call/disconnect BluetoothPress: pause / play; answer call / hang up;Double-click: redial the phone
[738E]	Press for 3 seconds: next songpress: volume +
[TSK8]	Press for 3 seconds: enter / save settingspress: view current time, alarm clock time;switch to next settingDouble click: quickly cancel / enable alarm clock
[646C]	press for 3 seconds: turn off the screen; turn off the alarm clock for the dayShort press: switch sound effects (system default bass)

The Wireless Soundbar is switched on by default clock mode: switch to ON position to turn on, screen display digital, need to manually set the local time at this time (do not have automatic timing function). In all modes of this speaker, the default volume is 4, the maximum is 15, and the alarm volume is 8.

Power On (Long press)

Press On/Off button located at the back of the speaker to Power On.

Pairing the wireless speaker (switched off)

Step 1: Activate Bluetooth function on your mobile device to begin pairing with speaker.

Step 2: Switch on speaker by pressing the On/Off button.

Step 3: Press "M" on speaker to activate Bluetooth.

Step 4: Connect to the speaker by selecting 'Valore BTS30' under the device list.

Press “↗” for 3 secondsri disconnect Bluetooth connection.

Note: If the pairing is not successful, please turn off wireless speaker first, and then re-pair again. After pairing is successful, paired devices will remember each other. Unless pairing information is deleted because of new pairing, no need to pair when using the next time.

If you want to pair the wireless speaker with other devices, please turn off Bluetooth function of existing source device, and pair the wireless speaker with the new device according to steps 1-3 mentioned above.

Micro SD Card Mode / USB Mode

1. Turn on soundbar, insert Micro SD card/USB. The soundbar automatically enters Micro SD/USB mode.
2. If the Micro SD card/USB is inserted, press "M" twice to enter mode manually.
3. When Micro SD card/USB is remove, the soundbar will enter Bluetooth mode automatically.

AUX IN mode

1. Turn on soundbar, insert one end of the audio cable into the AUX port and the other line end to mobile or computer, the speaker automatically enters the AUX IN mode.
2. Press "→" to mute. Icon will light up when mute.
3. Remove AUX cable, the soundbar will enter Bluetooth mode automatically

Charging the soundbar

1. Insert the USB charging cable into the soundbar and connect the 5V charger to a wall plug or computer.
2. When charging, the charging indicator is red.
   When fully charged, red indicator will go off.
3. Power saving mode: Turn on/off the screen display by pressing “( )” for 3 seconds. When the alarm rings, screen automatically lights up.

Note: After full charged, please unplug the charging power. When the power's remaining is at 20%, the power icon will light up. At 15%, it will start to flicker slowly. Then turn off in about 2 minutes. The clock will still continue to work.

When the remaining power is exhausted, all settings of the soundbar will be lost. Please ensure to charge soundbar in time.

Clock setting

Setting: Under the clock display state, press “☐” for 3 seconds to enter clock setting. The screen displays the hour digital slow flash. Short press “◀/−” and “+/▶” to adjust hours.

After setting up the hour digital, short press “💡” again. Screen displays the minutes digital slow flash. Short press the “◀/−” and “+/▶” to adjust minutes.

Remarks: there is no operation in the continuous 15S during the setup process. The system automatically exit the setup time mode and does not save.

Alarm clock setting

1. In clock display state, short press "💡". Alarm clock 1 icon will light up.
2. Press “☐” for 3 seconds to enter alarm clock 1 setting. Hours digital flash. Short press the “◀/−” or “+/▶” to adjust hours.
3. Press “💡” minutes digital flash. Short press the “◀/−” or “+/▶” to adjust minutes.
4. Press “💡” to enter the alarm sound setting option. Press “◀/−” or “+/▶” to choose between 6 options.
5. Press “💡” to enter alarm clock 1 settings. Press “◀/−” or “+/▶” to On/Off alarm.
6. Press “💡” for 3 seconds to exit and save alarm clock 1 settings. After setting is successful. The alarm clock 1 icon will always be light up. (Turn off the alarm clock, the icon light will go off)

Note: Alarm ring, no operation, ring for 2 minutes, then snooze, 3 minutes interval alarm clock ring again, repeat three times.

TROUBLESHOOTING

Issue 1: Speaker is unable to connect successfully to your mobile device

Problem 1: Speaker's battery is flat

Solution: Fully charge the speaker (4 hours) and retry connection with your mobile device.

Problem 2: Speaker not paired to your mobile device

Solution: Make sure that the speaker is successfully paired upon selecting ‘Valore BTS30’ in the device list.

Problem 3: Speaker and mobile device too far apart

Solution: Make sure that the speaker is within a metre range during pairing and connection.

Problem 4: Speaker is connected to other mobile device

Solution: Make sure that the speaker has already been disconnected before making a new connection with a new device.

Issue 2: Sound from the speaker is too soft or silent

Problem 1: Speaker's battery is low / flat

Solution: Fully charge the speaker (4 hours) and retry connection with your mobile device.

Problem 2: Speaker or mobile device's volume is too low

Solution: Turn the volume of the speaker or mobile device up to increase the volume.

Problem 3: Music track may not be audible

Solution: Make sure that the music track is of a playable format for the mobile device.

Problem 4: Speaker and mobile device might not be connected properly.

Solution: Repeat the connection step via Bluetooth again to make sure that it is connected properly and try again.

TECHNICAL SUPPORT & WARRANTY

• For Technical Support, email us at [e-mail].
• For Warranty Registration, visit www.valore.sg.

Cautions:

Read all the instructions and warnings carefully prior to using this product.

• Do not store the speaker in a high temperature environment.
• Do not place the speaker near a fire or other excessively hot environments.
• Do not expose this speakerto moisture or submerge it in liquid. Keep speaker dry at all times.
• Do not attempt to charge the speaker using any other method or connection other than the headset's provided charging cable.
• Do not disassemble this speaker or attempt to repair or modify it in any manner.
• Be cautious of excessive drops, bumps, abrasions or other impacts to this headset. If there is any damage to the speaker such as dents, punctures, tears, deformities or corrosion, stop using the speaker and contact us immediately via email at [e-mail], or return this product to the store where you have purchased it from.
• If the product produces an abnormal smell, high temperature (low temperature during normal use), discolours or changes shape abnormally, stop using the product and contact us immediately via email at [e-mail].

DISCLAIMER & TRADEMARKS

All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and communications statutes.

The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered trademarks and service marks of Valore and others. All other registered and unregistered company names, product names and marks mentioned herein the (“Materials”) are the property of their respective owners and may be trademarks or registered trademarks.

Complies with IMDA Standards DA103331

Inspired by Valore Singapore

For full range of Valore products visit www.valore.sg