STR-DA777ES - Receiver SONY - Free user manual and instructions
Find the device manual for free STR-DA777ES SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Receiver |
| Brand | Sony |
| Model | STR-DA777ES |
| Dimensions (W x H x D) | 430 x 157 x 394 mm |
| Weight | 16 kg |
| Power Output (per channel) | 100 W x 7 (8 ohms, 20 Hz - 20 kHz, 0.09% THD) |
| Surround Sound Formats | Dolby Digital, DTS, Dolby Pro Logic II, DTS ES |
| Auto-Calibration | Digital Cinema Auto Calibration with supplied microphone |
| Audio Inputs | 4 optical, 3 coaxial digital, 7 analog stereo, multi-channel |
| Video Inputs/Switching | Composite, S-Video, Component (3 in, 2 out) |
| Pre-Outputs | Front, Center, Surround, Surround Back (7.1) |
| FM/AM Tuner | Yes, with 30 presets |
| Power Consumption | 350 W |
| Remote Control | Yes, programmable |
| Speaker Impedance | 4 - 16 ohms |
| Repairability | Service manual and spare parts available |
| Cleaning | Wipe with a soft, dry cloth |
| Safety | Do not expose to rain or moisture; disconnect during storms |
| Warranty | 2 years (limited) |
Frequently Asked Questions - STR-DA777ES SONY
How do I reset the Sony STR-DA777ES receiver to factory defaults?
Turn off the receiver. Press and hold the POWER button for 5 seconds. The receiver will reset to factory settings.
How can I connect a TV to the STR-DA777ES?
Use component video (Y/Pb/Pr) or S-Video output from the receiver to the TV. For audio, connect the TV's digital output (optical or coaxial) to the receiver's input.
Why is there no sound from the subwoofer?
Ensure the subwoofer is connected to the SUBWOOFER pre-out. In the setup menu, set SPEAKER PATTERN to include a subwoofer and enable the LFE channel.
Does the STR-DA777ES support Dolby TrueHD or DTS-HD?
No, this model only supports older lossy formats like Dolby Digital and DTS. It does not decode HD audio formats.
Can I use 4 ohm speakers with this receiver?
Yes, the receiver is stable with 4 ohm speakers, but ensure adequate ventilation and avoid driving all channels at high volume for prolonged periods.
How do I run the auto-calibration system?
Connect the supplied microphone to the AUDIO IN (or MIC jack). Press SET UP, select AUTO CALIBRATION, and follow the on-screen prompts.
What is the video resolution supported by the component video outputs?
The component video outputs can handle 480i/480p and 1080i (not 1080p). It does not upscale.
How do I listen to FM radio?
Connect the FM antenna. Press TUNER repeatedly to select FM. Use TUNING to find stations and MEMORY to save presets.
The remote control is not working. What should I do?
Replace the batteries. Check that no objects are blocking the sensor. Try resetting the remote by removing batteries and pressing all buttons.
Can I bi-amp my front speakers with this receiver?
Yes, the receiver supports bi-amplification for the front channels. Connect the HF and LF terminals of the speakers to the Front and Surround Back (or Surround) speaker outputs accordingly, and adjust the setup menu.
User questions about STR-DA777ES SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual STR-DA777ES - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. STR-DA777ES by SONY.