CAW 1010 - Washing machine Tricity Bendix - Free user manual and instructions
Find the device manual for free CAW 1010 Tricity Bendix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing Machine |
| Brand | Tricity Bendix |
| Model | CAW 1010 |
| Capacity | 5 kg |
| Dimensions (H x W x D) | 850 x 600 x 500 mm |
| Weight | 65 kg |
| Energy Class | D |
| Maximum Spin Speed | 1000 rpm |
| Number of Programs | 12 |
| Water Connection | Cold and hot fill |
| Power Supply | 220-240 V, 50 Hz |
| Noise Level (Wash/Spin) | 75 dB / 82 dB |
| Features | Delay start, half load, quick wash |
| Door Opening | 180 degrees |
| Control Type | Rotary dial with push buttons |
| Safety Features | Child lock, overflow protection |
| Maintenance | Clean pump filter regularly; descale every 3 months |
Frequently Asked Questions - CAW 1010 Tricity Bendix
How do I clean the pump filter?
To clean the pump filter, first unplug the machine and turn off the water. Open the filter door at the bottom front, place a towel below, and unscrew the filter cap. Remove any debris and rinse the filter under running water. Replace and tighten securely.
Why is my machine not spinning?
Possible causes include: the load is unbalanced, the drain hose is blocked, or the spin speed selector is set to a low position. Check for error codes and consult the manual. Also ensure the machine is level.
What does error code E10 mean?
Error code E10 indicates a water fill problem. Check that the water taps are open, the inlet hose is not kinked, and the water pressure is adequate. If the issue persists, the inlet valve may need replacement.
How to descale the washing machine?
Use a descaling agent approved for washing machines. Run an empty hot cycle (90°C) with the descaler. Alternatively, you can use white vinegar: pour 500 ml into the detergent drawer and run a hot cycle. Repeat every 3 months to maintain performance.
Can I wash a duvet in this machine?
The CAW 1010 has a 5 kg capacity, suitable for small duvets (single size). Check the care label of the duvet. Use a delicate program with low spin speed to avoid damaging the filling.
What detergent should I use?
Use a high-efficiency (HE) detergent for front-loading machines. For hard water, add a water softener. Avoid overdosing; follow the detergent manufacturer's instructions. For white loads, use bleach-based detergent; for colors, use color-safe detergent.
How do I reset the machine?
To reset, unplug the machine from the power outlet for at least 1 minute, then plug it back in. This clears temporary electronic glitches. If an error persists, refer to the manual or contact service.
Why is there water left in the drum after a cycle?
Some water may remain due to the siphon break design; this is normal. However, excessive water could indicate a blocked drain hose or pump filter. Check and clean the filter and hose. Also ensure the drain hose is not kinked.
How to install the machine?
Install on a solid, level floor. Remove all transport bolts (usually 4) from the back. Connect the inlet hose to a cold and hot water tap (if available), and the drain hose to a standpipe or sink outlet. Level the machine by adjusting the feet. Plug into a grounded outlet.
What are the dimensions of the CAW 1010?
The dimensions are approximately 850 mm in height, 600 mm in width, and 500 mm in depth. Allow a 10 cm clearance at the back and sides for ventilation during installation.
User questions about CAW 1010 Tricity Bendix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual CAW 1010 - Tricity Bendix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CAW 1010 by Tricity Bendix.